Bedienungsanleitung Garmin Edge 20 (Seite 5 von 14) (Englisch)

589557

Zoom out

Zoom in

Vorherige Seite

1/14

Nächste Seite

Introduction

WARNING

See the

Important Safety and Product Information guide in the

product box for product warnings and other important

information.

Always consult your physician before you begin or modify any

exercise program.

Keys

Select to turn the backlight on and off.

Hold to turn the device on and off.

Select to start and stop the timer.

Select to choose an option or to acknowledge a message.

Select to scroll through the data screens, options, and settings.

From the home screen, select to view the device menu.

Select to mark a new lap.

Select to return to the previous screen.

Status Icons

A solid icon means the signal was found or the sensor is

connected.

GPS status

Bluetooth

status

Heart rate status

Speed and cadence status

LiveTrack

status

Installing the Standard Mount

For the best GPS reception, position the bike mount so the front

of the device is oriented toward the sky. You can install the bike

mount on the stem or the handlebars.

Select a secure location to mount the device where it does

not interfere with the safe operation of your bike.

Place the rubber disk

on the back of the bike mount.

The rubber tabs align with the back of the bike mount so it

stays in place.

Place the bike mount on the bike stem.

Attach the bike mount securely using the two bands

Align the tabs on the back of the device with the bike mount

notches

Press down slightly and turn the device clockwise until it

locks into place.

Releasing the

Edge

Turn the Edge clockwise to unlock the device.

Lift the Edge off the mount.

Going for a Ride

The device comes partially charged. You may need to charge

the device (Charging the Device, page 1) before going for a

ride. If your Edge 25 device was packaged with an ANT+

sensor, they are already paired.

Hold to turn on the device.

From the home screen, select .

Go outside, and wait while the device locates satellites.

The satellite bars are solid when the device is ready.

Select to start the timer.

NOTE: History is recorded only while the timer is running.

Select for additional data pages.

Time

, distance

, speed

, total ascent, and calories are

recorded while the timer is running. When using an optional

heart rate monitor, your beats per minute and heart rate zone

appear.

TIP: You can customize the data fields (Changing Data

Fields,

page

Select to stop the timer.

Select

Save.

Charging the Device

WARNING

This device contains a lithium-ion battery. See the Important

Safety and Product Information guide in the product box for

product warnings and other important information.

NOTICE

To prevent corrosion, thoroughly clean and dry the contacts and

the surrounding area before charging or connecting to a

computer.

Refer to the cleaning instructions in the appendix.

Plug the USB cable into a USB port on your computer.

Introduction 1

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin Edge 20 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin Edge 20

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info