691267
23
Zoom out
Zoom in
Vorherige Seite
1/34
Nächste Seite
Select Done.
7
Select or to change the layout.
8
Select .
9
Select an option.
Select a data field, then select another data field to
rearrange them.
Select a data field twice to change it.
10
Select Done.
Editing a Data Screen
1
Select Menu > Settings > Activity Profiles.
2
Select a profile.
3
Select Data Screens.
4
Select a data screen.
5
Select Layout and Data Fields.
6
Select or to change the layout.
7
Select .
8
Select an option.
Select a data field, then select another data field to
rearrange them.
Select a data field twice to change it.
9
Select Done.
Rearranging Data Screens
1
Select Menu > Settings > Activity Profiles.
2
Select a profile.
3
Select Data Screens.
4
Select a data screen.
5
Select Reorder Screen.
6
Select or .
7
Select .
Alerts
You can use alerts to train toward specific time, distance,
calorie, heart rate, cadence, and power goals. Alert settings are
saved with your activity profile.
Setting Range Alerts
If you have an optional heart rate monitor, cadence sensor, or
power meter, you can set up range alerts. A range alert notifies
you when the device measurement is above or below a
specified range of values. For example, you can set the device
to alert you when your cadence is below 40 RPM and over
90 RPM. You can also use a training zone for the range alert
(Training Zones, page 9).
1
Select Menu > Settings > Activity Profiles.
2
Select a profile.
3
Select Alerts.
4
Select Heart Rate Alert, Cadence Alert, or Power Alert.
5
Select the minimum and maximum values, or select zones.
Each time you exceed or drop below the specified range, a
message appears. The device also beeps if audible tones are
turned on (Turning the Device Tones On and Off, page 21).
Setting Recurring Alerts
A recurring alert notifies you each time the device records a
specified value or interval. For example, you can set the device
to alert you every 30 minutes.
1
Select Menu > Settings > Activity Profiles.
2
Select a profile.
3
Select Alerts.
4
Select an alert type.
5
Turn on the alert.
6
Enter a value.
7
Select .
Each time you reach the alert value, a message appears. The
device also beeps if audible tones are turned on (Turning the
Device Tones On and Off, page 21).
Setting Smart Eat and Drink Alerts
A smart alert notifies you to eat or drink at strategic intervals
based on current ride conditions. Smart alert estimates for a ride
are based on the temperature, elevation gain, speed, duration,
and heart rate and power data (if applicable).
1
Select Menu > Settings > Activity Profiles.
2
Select a profile.
3
Select Alerts.
4
Select Eat Alert or Drink Alert.
5
Turn on the alert.
6
Select Type > Smart.
Each time you reach the estimated smart alert value, a message
appears. The device also beeps if audible tones are turned on
(Turning the Device Tones On and Off, page 21).
Auto Lap
Marking Laps by Position
You can use the Auto Lap feature to mark the lap at a specific
position automatically. This feature is helpful for comparing your
performance over different parts of a ride (for example, a long
climb or training sprints). During courses, you can use the By
Position option to trigger laps at all of the lap positions saved in
the course.
1
Select Menu > Settings > Activity Profiles.
2
Select a profile.
3
Select Auto Features > Auto Lap > Auto Lap Trigger > By
Position > Lap At.
4
Select an option:
Select Lap Press Only to trigger the lap counter each
time you select and each time you pass any of those
locations again.
Select Start and Lap to trigger the lap counter at the GPS
location where you select and at any location during
the ride where you select .
Select Mark and Lap to trigger the lap counter at a
specific GPS location marked before the ride and at any
location during the ride where you select .
5
If necessary, customize the lap data fields (Adding a Data
Screen, page 18).
Marking Laps by Distance
You can use the Auto Lap feature to mark the lap at a specific
distance automatically. This feature is helpful for comparing your
performance over different parts of a ride (for example, every 10
miles or 40 kilometers).
1
Select Menu > Settings > Activity Profiles.
2
Select a profile.
3
Select Auto Features > Auto Lap > Auto Lap Trigger > By
Distance > Lap At.
4
Enter a value.
5
If necessary, customize the lap data fields (Adding a Data
Screen, page 18).
Using Auto Sleep
You can use the Auto Sleep feature to automatically enter sleep
mode after 5 minutes of inactivity. During sleep mode, the
screen is turned off and the ANT+ sensors, Bluetooth, and GPS
are disabled.
WiFi continues to run while the device is asleep.
Customizing Your Device 19
23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

garmin-edge-530

Suche zurücksetzen

  • wie bring ich die durchschnittspulsanzeige auf die startseite
    Eingereicht am 4-4-2021 08:46

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Garmin Edge 530 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Garmin Edge 530

Garmin Edge 530 Bedienungsanleitung - Deutsch - 38 seiten

Garmin Edge 530 Bedienungsanleitung - Holländisch - 36 seiten

Garmin Edge 530 Bedienungsanleitung - Französisch - 38 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info