Zoom out
Zoom in
Vorherige Seite
1/22
Nächste Seite
Edge
®
Explore 1000
Owner’s Manual
September 2015 Printed in Taiwan 190-01944-00_0B
1

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Inhalt der Seiten


  • Page 1

    Edge Explore 1000
    ®

    Owner’s Manual

    September 2015

    Printed in Taiwan

    190-01944-00_0B



  • Page 2

    All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the
    right to change or improve its products and to make changes in the content of this manual without obligation to notify any person or organization of such
    changes or improvements. Go to www.garmin.com for current updates and supplemental information concerning the use of this product.
    Garmin , the Garmin logo, ANT+ , Auto Lap , Auto Pause , and Edge are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other
    countries. Garmin Connect™, Garmin Express™, Varia™, and Vector™ are trademarks of Garmin Ltd. or its subsidiaries. These trademarks may not be used
    without the express permission of Garmin.
    ®

    ®

    ®

    ®

    ®

    The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Garmin is under license. iOS is a registered
    trademark of Cisco Systems, Inc. used under license by Apple Inc. Mac is a trademark of Apple Inc., registered in the U.S. and other countries. microSD™ and
    the microSD logo are trademarks of SD-3C, LLC. Wi‑Fi is a registered trademark of Wi-Fi Alliance Corporation. Windows is a registered trademark of
    Microsoft Corporation in the United States and other countries. Other trademarks and trade names are those of their respective owners.
    ®

    ®

    ®

    ®

    This product is ANT+ certified. Visit www.thisisant.com/directory for a list of compatible products and apps.
    ®

    M/N: F4ACGQ00

    ®



  • Page 3

    Table of Contents
    Introduction.....................................................................1

    Situational Awareness ................................................................ 8
    Training with Power Meters ........................................................ 8
    Calibrating Your Power Meter ................................................ 8

    Getting Started ............................................................................ 1
    Charging the Device ................................................................... 1
    About the Battery ................................................................... 1
    Installing the Out-Front Mount .................................................... 1
    Installing the Standard Mount ..................................................... 1
    Releasing the Edge ................................................................ 2
    Turning On the Device ................................................................ 2
    Keys ....................................................................................... 2

    Wireless Remote Control ............................................... 8

    Navigation....................................................................... 2

    Setting Up Your User Profile ....................................................... 9
    About Lifetime Athletes .......................................................... 9
    Training Zones ............................................................................ 9
    Setting Your Heart Rate Zones .............................................. 9
    Setting Your Power Zones ................................................... 10
    Bluetooth Settings .....................................................................10
    Wi‑Fi Settings ........................................................................... 10
    Updating Your Activity Settings ................................................ 10
    Customizing the Data Screens ............................................ 10
    Map Settings ........................................................................ 10
    Route Settings ..................................................................... 11
    Alerts .................................................................................... 11
    Auto Lap® ............................................................................ 11
    Using Auto Pause ................................................................ 11
    Using Auto Sleep ................................................................. 11
    Using Auto Scroll ................................................................. 11
    Changing the Start Notice .................................................... 12
    System Settings ........................................................................ 12
    GPS Settings ....................................................................... 12
    Changing the Accent Color .................................................. 12
    Display Settings ................................................................... 12
    Changing the Units of Measure ........................................... 12
    Setting the Device Tones ..................................................... 12
    Changing the Device Language .......................................... 12
    Changing the Configuration Settings ................................... 12
    Time Zones .......................................................................... 12

    Going for a Ride .......................................................................... 2
    Acquiring Satellite Signals ..................................................... 3
    Courses ...................................................................................... 3
    Following a Course From the Web ........................................ 3
    Creating and Riding a Course ................................................ 3
    Creating and Riding a Round-Trip Course ............................ 3
    Creating a Course from a Recent Ride .................................. 4
    Navigating Back to Start ........................................................ 4
    Stopping a Course ................................................................. 4
    Displaying a Course on the Map ............................................ 4
    Viewing Course Details .......................................................... 4
    Course Options ...................................................................... 4
    Deleting a Course .................................................................. 4
    Locations .................................................................................... 4
    Saving Your Location ............................................................. 4
    Saving a Location from the Map ............................................ 4
    Navigating to a Saved Location ............................................. 4
    Navigating to a Recent Location ............................................ 4
    Setting the Search Location ................................................... 5
    Navigating to Known Coordinates ......................................... 5
    Projecting a Location ............................................................. 5
    Editing Locations .................................................................... 5
    Deleting a Location ................................................................ 5

    Incident Detection.......................................................... 5
    Setting Up Incident Detection ..................................................... 5
    Setting Up Rider Information and Emergency Contacts ............. 5
    Turning Incident Detection On and Off ....................................... 5
    Viewing Your Emergency Contacts ............................................ 5
    Cancelling an Automated Message ............................................ 5
    Sending a Status Update After an Incident ................................ 5

    History............................................................................. 6
    Viewing Your Ride ...................................................................... 6
    Using the Calendar ................................................................ 6
    Deleting Rides ........................................................................ 6
    Personal Records ....................................................................... 6
    Deleting a Personal Record ................................................... 6
    Restoring a Personal Record ................................................. 6
    Viewing Data Totals .................................................................... 6
    Deleting Data Totals .............................................................. 6
    Sending Your Ride to Garmin Connect ...................................... 6
    Garmin Connect ..................................................................... 6
    Bluetooth® Connected Features ........................................... 6
    Wi‑Fi® Connected Features .................................................. 7
    Transferring Files to Another Edge Device ................................. 7
    Changing the Data Storage Location ......................................... 7
    Installing a Memory Card ............................................................ 7
    Data Management ...................................................................... 7
    Connecting the Device to Your Computer ............................. 7
    Transferring Files to Your Device .......................................... 7
    Deleting Files ......................................................................... 8
    Disconnecting the USB Cable ................................................ 8

    Device Overview ......................................................................... 8
    Status LED .................................................................................. 8
    Pairing the Remote with Your Edge Device ............................... 8
    Customizing the Action Key ........................................................ 9
    Using the Mounts ........................................................................ 9
    Replacing the Battery ................................................................. 9

    Customizing Your Device.............................................. 9

    Device Information....................................................... 12
    Specifications ............................................................................ 12
    Edge Specifications ............................................................. 12
    Remote Specifications ......................................................... 12
    Device Care .............................................................................. 13
    Cleaning the Device ............................................................. 13

    Troubleshooting........................................................... 13
    Resetting the Device ................................................................. 13
    Clearing User Data .............................................................. 13
    Saving Energy While Charging the Device ............................... 13
    Maximizing Battery Life ............................................................. 13
    Updating the Software .............................................................. 13
    Support and Updates ................................................................ 13
    Getting More Information .......................................................... 13
    Getting the Owner's Manual ..................................................... 13
    Viewing Device Information ...................................................... 13
    Improving GPS Satellite Reception .......................................... 13
    Temperature Readings ............................................................. 13
    Replacement O-rings ................................................................ 13

    Appendix....................................................................... 14
    Data Fields ................................................................................ 14
    Heart Rate Zone Calculations ................................................... 14
    Software License Agreement ................................................... 15

    Index .............................................................................. 16

    ANT+ Sensors................................................................. 8
    Pairing Your ANT+ Sensors ....................................................... 8
    Table of Contents

    i



  • Page 4



  • Page 5

    Introduction
    WARNING
    See the Important Safety and Product Information guide in the
    product box for product warnings and other important
    information.
    Always consult your physician before you begin or modify any
    exercise program.

    Getting Started
    When using your device the first time, you should complete
    these tasks to set up the device and learn about the basic
    features.
    1 Charge the device (Charging the Device, page 1).
    2 Install the device using the standard mount (Installing the
    Standard Mount, page 1) or the out-front mount (Installing
    the Out-Front Mount, page 1).
    3 Turn on the device (Turning On the Device, page 2).
    4 Locate satellites (Acquiring Satellite Signals, page 3).
    5 Go for a ride (Going for a Ride, page 2).
    6 Upload your ride to Garmin Connect™ (Sending Your Ride to
    Garmin Connect, page 6).

    3 If necessary, remove the two screws on the back side of the
    mount Â, rotate the connector Ã, and replace the screws to
    change the orientation of the mount.

    4 Place the rubber pad around the handlebar:
    • If the handlebar diameter is 25.4 mm, use the thicker pad.
    • If the handlebar diameter is 31.8 mm, use the thinner pad.
    5 Place the handlebar connector around the rubber pad.
    6 Replace and tighten the screw.
    NOTE: Garmin recommends a torque specification of 7 lbfin. (0.8 N-m). You should check the tightness of the screw
    periodically.
    7 Align the tabs on the back of the Edge device with the bike
    mount notches Ä.
    ®

    Charging the Device
    NOTICE
    To prevent corrosion, thoroughly dry the USB port, the weather
    cap, and the surrounding area before charging or connecting to
    a computer.
    The device is powered by a built-in lithium-ion battery that you
    can charge using a standard wall outlet or a USB port on your
    computer.
    NOTE: The device will not charge when outside the approved
    temperature range (Edge Specifications, page 12).
    1 Pull up the weather cap À from the USB port Á.

    8 Press down slightly and turn the Edge device clockwise until
    it locks into place.

    Installing the Standard Mount

    2 Plug the small end of the USB cable into the USB port on the
    device.

    3 Plug the large end of the USB cable into an AC adapter or a

    For the best GPS reception, position the bike mount so the front
    of the device is oriented toward the sky. You can install the bike
    mount on the stem or the handlebars.
    1 Select a secure location to mount the device where it does
    not interfere with the safe operation of your bike.
    2 Place the rubber disk À on the back of the bike mount.
    The rubber tabs align with the back of the bike mount so it
    stays in place.

    computer USB port.
    4 Plug the AC adapter into a standard wall outlet.
    When you connect the device to a power source, the device
    turns on.
    5 Charge the device completely.

    About the Battery
    WARNING
    This device contains a lithium-ion battery. See the Important
    Safety and Product Information guide in the product box for
    product warnings and other important information.

    Installing the Out-Front Mount
    1 Select a secure location to mount the Edge device where it
    does not interfere with the safe operation of your bike.

    2 Use the hex key to remove the screw À from the handlebar
    connector Á.

    Introduction

    3 Place the bike mount on the bike stem.
    4 Attach the bike mount securely using the two bands Á.
    5 Align the tabs on the back of the device with the bike mount
    notches Â.
    6 Press down slightly and turn the device clockwise until it
    locks into place.

    1



  • Page 6

    • Select
    • Select
    • Select

    to search near a location.
    to search by name.
    to delete an item.

    Viewing the Connections Screen
    The connections screen displays the status of the GPS, ANT+
    sensors, and wireless connections.
    From the home screen, swipe down from the top of the
    screen.

    ®

    Releasing the Edge
    1 Turn the Edge clockwise to unlock the device.
    2 Lift the Edge off the mount.

    Turning On the Device
    The first time you turn on the device, you are prompted to
    configure system settings and the user profile.
    1 Hold .
    2 Follow the on-screen instructions.

    Keys
    The connections screen appears. A flashing icon means the
    device is searching. You can select any icon to change the
    settings.

    À

    Select to enter sleep mode and wake the device.
    Hold to lock the screen and turn the device on and off.

    Á

    Select to mark a new lap.

    Â

    Select to start and stop the timer.

    Using the Backlight
    At any time, you can tap anywhere on the screen to turn on the
    backlight.
    1 From the home screen, select the status bar at the top of the
    screen.
    2 Select Brightness to adjust the backlight brightness and
    timeout:
    • To manually adjust the brightness, select and .
    • To allow the device to automatically adjust the brightness
    based on the ambient light, select Auto Brightness.
    • To adjust the timeout, select Backlight Timeout and
    select an option.

    Navigation
    Going for a Ride

    Home Screen Overview
    The home screen gives you quick access to all the features of
    the Edge device.
    Select to go for a ride.
    Where To?

    Select to search for and navigate to a location.

    Courses

    Select to manage your courses.

    History

    Select to manage your history and personal records.

    Contacts

    Select to view your emergency contacts.

    1 From the home screen, select .
    2 Wait while the device locates satellites.
    3 Select to start the timer.

    Select to view the settings menu.

    Using the Touchscreen
    • When the timer is running, tap the screen to view the timer
    overlay.
    The timer overlay allows you to return to the home screen
    during a ride.
    • Select
    to save your changes and close the page.
    • Select to close the page and return to the previous page.
    • Select
    to return to the previous page.
    • Select
    to return to the home screen.
    • Select and to scroll.
    2

    NOTE: History is recorded only while the timer is running.
    4 Swipe the screen for additional data screens.
    You can swipe down from the top of the data screens to view
    the connections screen.
    Navigation



  • Page 7

    5 If necessary, tap the screen to view the timer overlay.
    6 Select to stop the timer.
    7 Select End Ride > Save Ride.
    Acquiring Satellite Signals
    The device may need a clear view of the sky to acquire satellite
    signals. The time and date are set automatically based on the
    GPS position.
    1 Go outdoors to an open area.
    The front of the device should be oriented toward the sky.
    2 Wait while the device locates satellites.
    It may take 30–60 seconds to locate satellite signals.

    6 Select View Map.
    The device calculates your route, and a map of the course
    appears.
    TIP: You can select
    to view an elevation plot of the course.
    7 Select Ride.
    8 Follow the on-screen instructions to your destination.

    Courses
    You can send a course from your Garmin Connect account to
    your device. After it is saved to your device, you can navigate
    the course on your device. You can also create and save a
    custom course directly on your device.
    You can follow a saved course simply because it is a good
    route. For example, you can save and follow a bike-friendly
    commute to work.

    Following a Course From the Web
    Before you can download a course from Garmin Connect, you
    must have a Garmin Connect account (Garmin Connect,
    page 6).
    1 Connect the device to your computer using the USB cable.
    2 Go to www.garminconnect.com.
    3 Create a new course, or select an existing course.
    4 Select Send to Device.
    5 Disconnect the device, and turn it on.
    6 Select Courses > Saved Courses.
    7 Select the course.
    8 Select Ride.

    Creating and Riding a Course
    1 Select Courses > Course Creator > Add First Location.
    2 Select an option:
    • To select your current location on the map, select Current
    Location.
    NOTE: If the device cannot acquire satellite signals for
    your current location, the device prompts you to use the
    last known location or to select the location on the map.
    • To select a saved location, select Saved > Locations,
    and select a location.
    • To select a location for which you recently searched,
    select Recent Finds, and select a location.
    • To select a location on the map, select Use Map, and
    select a location.
    • To browse for and select a point of interest, select POI
    Categories, select a category, and select a nearby point
    of interest.
    • To select a city, select Cities, and select a nearby city.
    • To select an address, select Addresses, and follow the
    on-screen instructions.
    • To select an intersection, select Intersections, and follow
    the on-screen instructions.
    • To use known coordinates for a location, select
    Coordinates, and enter the coordinates.
    3 Select Use.
    4 Select Add Next Location.
    5 Repeat steps 2 through 4 until you have selected all locations
    for the course.
    Navigation

    Calculating a Loop-to-Start Course
    Before you can calculate a loop-to-start course, you must create
    a course with only one location.
    Select Courses > Course Creator >
    > Loop to Start.
    The device calculates a route that loops back to the start
    location, and a map of the course appears.
    Calculating an Out-and-Back Course
    Before you can calculate an out-and-back course, you must
    create a course with two or more locations.
    Select Courses > Course Creator >
    > Out and Back.
    The device calculates a route that leads you out to and back
    from the end location, and a map of the course appears.
    Reversing the Course Direction
    Before you can reverse the direction of a course, you must
    create and calculate a course with at least one location.
    Select Courses > Course Creator >
    > Reverse
    Direction.
    The device reverses the direction of navigation, and a map of
    the course appears.
    Saving a Course from Course Creator

    1 Select Courses > Course Creator >

    .
    2 Enter a name for the course, and select
    3 Select .
    The course appears in the list.
    Deleting All Locations from a Course
    Select Courses > Course Creator >

    > Save as Course >
    .

    > Delete >

    .

    Course Creator Settings
    Select Courses > Course Creator > Settings.
    Routing Mode: Sets the transportation method to optimize your
    route.
    Calculation Method: Sets the method used to calculate your
    route.
    Lock on Road: Locks the position icon, which represents your
    position on the map, onto the nearest road.
    Avoidance Setup: Sets the road types to avoid while
    navigating.

    Creating and Riding a Round-Trip Course
    The device can create a round-trip course based on a specified
    distance, starting location, and direction of navigation.
    3



  • Page 8

    1
    2
    3
    4

    5
    6
    7
    8

    Select Courses > Round-Trip Course.
    Select Distance, and enter the total distance for the course.
    Select Start Location.
    Select an option:
    • To select your current location on the map, select Current
    Location.
    NOTE: If the device cannot acquire satellite signals for
    your current location, the device prompts you to use the
    last known location or to select the location on the map.
    • To select a location on the map, select Use Map, and
    select a location.
    • To select a saved location, select Saved Locations, and
    select a location.
    • To browse for and select a point of interest, select Search
    Tools > POI Categories, select a category, and select a
    nearby point of interest.
    • To select a city, select Search Tools > Cities, and select
    a nearby city.
    • To select an address, select Search Tools > Addresses,
    and follow the on-screen instructions.
    • To select an intersection, select Search Tools >
    Intersections, and follow the on-screen instructions.
    • To use known coordinates for a location, select Search
    Tools > Coordinates, and enter the coordinates.
    Select Start Direction, and select a direction heading.
    Select Search.
    TIP: You can select to search again.
    Select a course to view it on the map.
    TIP: You can select and to view the other courses.
    Select Ride.

    Creating a Course from a Recent Ride
    You can create a new course from a previously saved ride.
    1 Select Courses > Recent Rides.
    2 Select a ride.
    > Save Ride as Course.
    3 Select
    Enter
    a
    name
    for the course, and select .
    4
    Riding a Saved Course

    1 Select Courses > Saved Courses.
    2 Select a course.
    3 Select Ride.
    Navigating Back to Start
    At any point while riding a course, you can return to the starting
    point.
    1 Tap the screen to view the timer overlay.
    2 Select > Where To? > Back to Start.
    3 Select Along Same Route or Most Direct Route.
    4 Select Ride.
    The device navigates you back to the starting point of your
    course.

    Stopping a Course
    1 Scroll to the map.
    2 Select > .
    Displaying a Course on the Map
    For each course saved to your device, you can customize when
    and how it appears on the map. For example, you can set your
    commute course to always display on the map in yellow. You
    can have an alternate course display in green. This allows you
    to see the courses while you are riding, but not follow or
    navigate a particular course.
    4

    1
    2
    3
    4

    Select Courses > Saved Courses.
    Select a course.
    Select Settings.
    Select Always Display to make the course appear on the
    map.
    5 Select Color, and select a color.
    6 Select Course Points to include course points on the map.
    The next time you ride near the course, it appears on the map.

    Viewing Course Details
    1 Select Courses > Saved Courses.
    2 Select a course.
    3 Select an option:





    Select Summary to view details about the course.
    Select Map to view the course on the map.
    Select Elevation to view an elevation plot of the course.
    Select Laps to select a lap and view additional information
    about each lap.

    Course Options
    Select Courses > Saved Courses > .
    Turn Guidance: Enables or disables turn prompts.
    Off Course Warnings: Alerts you when you stray from the
    course.
    Search: Allows you to search for saved courses by name.
    Delete: Allows you to delete all or multiple saved courses from
    the device.

    Deleting a Course
    1 Select Courses > Saved Courses.
    2 Select a course.
    3 Select > .

    Locations
    You can record and store locations in the device.

    Saving Your Location
    You can save your present location, such as your home or
    parking spot.
    1 From the home screen, select the status bar or swipe down
    from the top of the page.
    The connections page appears.
    2 Select GPS > Mark Location > .

    Saving a Location from the Map
    1 Select Where To? > Browse Map > .
    2 Browse the map for a location.
    3 Select the location.
    4 Select the location information at the top of the map.
    5 Select > .
    Navigating to a Saved Location
    1 Select Where To? > Saved Locations.
    2 Select a location.
    3 If necessary, select to enter search information.
    4 Select Ride.
    Navigating to a Recent Location
    1 From the home screen, select Where To? > Recent Finds.
    2 Select a location.
    3 Select Ride.

    Navigation



  • Page 9

    Setting the Search Location
    By default, the device searches for points of interest and other
    locations near your current location. You can set the device to
    search near a different location.
    1 Select Where To? > Search Tools > .
    2 Select a search area.
    3 If necessary, select a location.
    4 If necessary, select Use.
    Navigating to a Point of Interest
    You can search for specific types of locations.
    1 From the home screen, select Where To? > Search Tools >
    POI Categories.
    2 Select a category.
    3 Select a point of interest.
    4 Select Ride.
    Navigating to a City, Address, or Intersection
    1 Select Where To? > Search Tools.
    2 Select an option:
    • Select Cities, and select a nearby city.
    • Select Addresses, and follow the on-screen instructions.
    • Select Intersections, and follow the on-screen
    instructions.
    3 Select Ride.

    Navigating to Known Coordinates
    1 From the home screen, select Where To? > Search Tools >
    Coordinates.
    2 Enter the coordinates, and select .
    3 Follow the on-screen instructions to your destination.

    Projecting a Location
    You can create a new location by projecting the distance and
    bearing from a marked location to the new location.
    1 Select Where To? > Saved Locations.
    2 Select a location.
    3 Select the location information at the top of the map.
    4 Select > Project Location.
    5 Enter the bearing and distance to the projected location.
    6 Select .

    Editing Locations
    1 Select Where To? > Saved Locations.
    2 Select a location.
    3 Select the information bar at the top of the screen.
    4 Select .
    5 Select an item.
    For example, select Change Elevation to enter a known
    altitude for the location.
    6 Enter the new information, and select .

    Deleting a Location
    1 Select Where To? > Saved Locations.
    2 Select a location.
    3 Select the location information at the top of the screen.
    4 Select > Delete Location > .

    Incident Detection
    CAUTION
    Incident detection is a supplemental feature and should not be
    relied on as a primary method to obtain emergency assistance.
    Incident Detection

    The Garmin Connect Mobile app does not contact emergency
    services on your behalf.
    When an incident is detected by your Edge device with GPS
    enabled, the Garmin Connect Mobile app can send an
    automated text message and email with your name and GPS
    location to your emergency contacts. A message appears on
    your device and paired smartphone indicating your contacts will
    be informed after 30 seconds have elapsed. If assistance is not
    needed, you can cancel the automated emergency message.
    Before you can enable incident detection on your device, you
    must set up emergency contact information in the Garmin
    Connect Mobile app. Your paired smartphone must be equipped
    with a data plan and be in an area of network coverage where
    data is available. Your emergency contacts must be able to
    receive text messages (standard text messaging rates may
    apply).

    Setting Up Incident Detection
    1 Go to www.garmin.com/intosports/apps, and download the
    Garmin Connect Mobile app to your smartphone.

    2 Pair your smartphone with your device (Pairing Your
    Smartphone, page 7).

    3 Set up your emergency contacts and rider information in the
    Garmin Connect Mobile app (Setting Up Rider Information
    and Emergency Contacts, page 5).
    4 Enable incident detection on your device (Turning Incident
    Detection On and Off, page 5).
    5 Enable GPS on your device (GPS Settings, page 12).

    Setting Up Rider Information and Emergency
    Contacts
    1 Open the Garmin Connect Mobile app on your smartphone.
    2 From the devices widget, select Incident Detection.
    3 Enter your rider information and your emergency contacts.
    Your selected contacts receive a message identifying them
    as emergency contacts for incident detection.

    Turning Incident Detection On and Off
    Select

    > System > Incident Detection.

    Viewing Your Emergency Contacts
    Before you can view your emergency contacts on your device,
    you must set up your rider information and emergency contacts
    in the Garmin Connect Mobile app.
    Select Contacts.
    Your emergency contacts' names and phone numbers
    appear.

    Cancelling an Automated Message
    When an incident is detected by your device, you can cancel the
    automated emergency message on your device or your paired
    smartphone before it is sent to your emergency contacts.
    Select Cancel >
    before the end of the 30-second
    countdown.

    Sending a Status Update After an Incident
    Before you can send a status update to your emergency
    contacts, your device must detect an incident and send an
    automated emergency message to your emergency contacts.
    You can send a status update to your emergency contacts
    informing them you are not in need of assistance.
    1 Swipe down from the top of the screen to view the
    connections screen.
    2 Select Incident Detected > Send I'm Okay.
    5



  • Page 10

    A message is sent to all emergency contacts.

    History
    History includes time, distance, calories, speed, lap data,
    elevation, and optional ANT+ sensor information.
    NOTE: History is not recorded while the timer is stopped or
    paused.
    When the device memory is full, a message appears. The
    device does not automatically delete or overwrite your history.
    Upload your history to Garmin Connect periodically to keep track
    of all your ride data.

    Sending Your Ride to Garmin Connect
    NOTICE
    To prevent corrosion, thoroughly dry the USB port, the weather
    cap, and the surrounding area before charging or connecting to
    a computer.

    1 Pull up the weather cap À from the USB port Á.

    Viewing Your Ride
    1 From the home screen, select History > Rides.
    2 Select an option.
    Using the Calendar
    The calendar on your device displays a visual history of your
    saved rides. When you select a day in the calendar, you can
    view a summary of each completed ride.
    1 Select History > Calendar.
    2 Select a date to view the saved rides.
    3 Select to view additional details.

    Deleting Rides
    1 Select History > Rides.
    2 Select .
    3 Select Delete All or Delete Multiple.

    Personal Records
    When you complete a ride, the device displays any new
    personal records you achieved during that ride. Personal
    records include your fastest time over a standard distance,
    longest ride, and most ascent gained during a ride.

    Deleting a Personal Record
    1 From the home screen, select History > Personal Records.
    2 Select a personal record.
    3 Select > .

    2 Plug the small end of the USB cable into the USB port on the

    device.
    3 Plug the large end of the USB cable into a computer USB
    port.
    4 Go to www.garminconnect.com/start.
    5 Follow the on-screen instructions.

    Garmin Connect
    You can connect with your friends on Garmin Connect. Garmin
    Connect gives you the tools to track, analyze, share, and
    encourage each other. Record the events of your active lifestyle
    including runs, walks, rides, swims, hikes, triathlons, and more.
    To sign up for a free account, go to www.garminconnect.com
    /start.
    Store your activities: After you complete and save an activity
    with your device, you can upload that activity to Garmin
    Connect and keep it as long as you want.
    Analyze your data: You can view more detailed information
    about your activity, including time, distance, elevation, heart
    rate, calories burned, cadence, an overhead map view, pace
    and speed charts, and customizable reports.
    NOTE: Some data requires an optional accessory such as a
    heart rate monitor.

    Restoring a Personal Record
    You can set each personal record back to the one previously
    recorded.
    NOTE: This does not delete any saved activities.
    1 Select History > Personal Records.
    2 Select a record to restore.
    3 Select Previous Record > .

    Viewing Data Totals
    You can view the accumulated data you have saved to the
    Edge, including the number of rides, time, distance, and
    calories.
    From the home screen, select History > Totals.

    Deleting Data Totals
    1 Select History > Totals.
    2 Select > .
    NOTE: This does not delete any saved activities.

    6

    Share your activities: You can connect with friends to follow
    each other's activities or post links to your activities on your
    favorite social networking sites.

    Bluetooth Connected Features
    ®

    The Edge device has Bluetooth connected features for your
    compatible smartphone or fitness device. Some features require
    you to install Garmin Connect mobile on your smartphone. Go to
    www.garmin.com/intosports/apps for more information.
    NOTE: Your device must be connected to your Bluetooth
    enabled smartphone to take advantage of some features.
    LiveTrack: Allows friends and family to follow your races and
    training activities in real time. You can invite followers using
    email or social media, allowing them to view your live data on
    a Garmin Connect tracking page.

    History



  • Page 11

    Activity uploads to Garmin Connect: Automatically sends
    your activity to Garmin Connect as soon as you finish
    recording the activity.
    Device to device transfers: Allows you to wirelessly transfer
    files to another compatible Edge device.
    Social media interactions: Allows you to post an update to
    your favorite social media website when you upload an
    activity to Garmin Connect.
    Weather updates: Sends real-time weather conditions and
    alerts to your device.
    Notifications: Displays phone notifications and messages on
    your device.
    Pairing Your Smartphone
    1 Go to www.garmin.com/intosports/apps, and download the
    Garmin Connect Mobile app to your smartphone.
    2 Bring your smartphone within 10 m (33 ft.) of your device.
    3 From your device, select > Bluetooth > Enable > Pair
    Smartphone, and follow the on-screen instructions.
    4 From your smartphone, open the Garmin Connect Mobile
    app, and follow the on-screen instructions to connect a
    device.
    The instructions are provided during the initial setup, or can
    be found in the Garmin Connect Mobile app help.
    5 From your iOS device, select Pair Bluetooth Smart, and
    follow the on-screen instructions to enable phone
    notifications on a compatible iOS device (optional).
    NOTE: Phone notifications require a compatible smartphone
    equipped with Bluetooth Smart wireless technology. Go to
    www.garmin.com/ble for compatibility information.
    ®

    1 Turn on both Edge devices, and bring them within range

    (3 m) of each other.
    2 From the device that contains the files, select > Device
    Transfers > Share Files > .
    3 Select a file type to share.
    4 Select one or more files to transfer, and select .
    5 From the device that receives the files, select > Device
    Transfers.
    6 Select a nearby connection.
    7 Select one or more files to receive, and select .
    A message appears on both devices after the file transfer is
    complete.

    Changing the Data Storage Location
    1 From the home screen, select

    > System > Data
    Recording.
    2 Select an option:
    • Select Internal Storage to save your data to the device
    memory.
    • Select Memory Card to save your data to an optional
    memory card.

    Installing a Memory Card
    You can install a microSD™ memory card for additional storage
    or pre-loaded maps.
    1 Pull up the weather cap À from the microSD card slot Á.

    Wi‑Fi Connected Features
    ®

    The Edge Explore 1000 device has Wi‑Fi connected features.
    The Garmin Connect Mobile application is not required for you
    to use Wi‑Fi connectivity.
    NOTE: Your device must be connected to a wireless network to
    take advantage of these features.
    Activity uploads to Garmin Connect: Automatically sends
    your activity to Garmin Connect as soon as you finish
    recording.
    Courses, workouts, and training plans: Activities and training
    plans previously selected from Garmin Connect are sent
    wirelessly to your device.
    Software updates: Your device wirelessly downloads the latest
    software update. The next time you turn on the device, you
    can follow the on-screen instructions to update the software.
    Setting Up Wi‑Fi Connectivity

    1 Go to www.garminconnect.com/start, and download the

    Garmin Express™ application.
    2 Follow the on-screen instructions to set up Wi‑Fi connectivity
    with Garmin Express.
    Connecting to a Wireless Network
    1 Select > Wi-Fi.
    2 If necessary, select Wi-Fi to turn on wireless technology.
    3 Select Add Network to scan for available networks.
    4 Select a wireless network.
    5 If necessary, select to enter the network SSID and
    password.
    The device stores the network information and connects
    automatically when you return to this location.

    Transferring Files to Another Edge Device
    You can transfer files wirelessly from one compatible Edge
    device to another using Bluetooth technology.
    History

    2 Press in the card until it clicks.

    Data Management
    NOTE: The device is not compatible with Windows 95, 98, Me,
    Windows NT , and Mac OS 10.3 and earlier.
    ®

    ®

    ®

    Connecting the Device to Your Computer
    NOTICE
    To prevent corrosion, thoroughly dry the USB port, the weather
    cap, and the surrounding area before charging or connecting to
    a computer.

    1 Pull up the weather cap from the USB port.
    2 Plug the small end of the USB cable into the USB port on the
    device.
    3 Plug the large end of the USB cable into a computer USB
    port.
    Your device and memory card (optional) appear as
    removable drives in My Computer on Windows computers
    and as mounted volumes on Mac computers.

    Transferring Files to Your Device
    1 Connect the device to your computer.
    On Windows computers, the device appears as a removable
    drive or a portable device, and the memory card may appear
    as a second removable drive. On Mac computers, the device
    and memory card appear as mounted volumes.
    NOTE: Some computers with multiple network drives may not
    display device drives properly. See your operating system
    documentation to learn how to map the drive.
    2 On your computer, open the file browser.
    7



  • Page 12

    3 Select a file.
    4 Select Edit > Copy.
    5 Open the portable device, drive, or volume for the device or
    memory card.

    6 Browse to a folder.
    7 Select Edit > Paste.
    The file appears in the list of files in the device memory or on
    the memory card.

    Deleting Files
    NOTICE
    If you do not know the purpose of a file, do not delete it. Your
    device memory contains important system files that should not
    be deleted.

    1
    2
    3
    4

    Open the Garmin drive or volume.
    If necessary, open a folder or volume.
    Select a file.
    Press the Delete key on your keyboard.

    Disconnecting the USB Cable

    Training with Power Meters
    • Go to www.garmin.com/intosports for a list of ANT+ sensors
    that are compatible with your device (such as Vector™).
    • For more information, see your owner's manual.

    Calibrating Your Power Meter
    Before you can calibrate your power meter, it must be properly
    installed, paired with your device, and actively recording data.
    For calibration instructions specific to your power meter, refer to
    the manufacturer's instructions.
    1 From the home screen, select the status bar or swipe down
    from the top of the page.
    Select
    > Calibrate.
    2
    3 Keep your power meter active by pedaling until the message
    appears.
    4 Follow the on-screen instructions.

    Wireless Remote Control
    Device Overview

    If your device is connected to your computer as a removable
    drive or volume, you must safely disconnect your device from
    your computer to avoid data loss. If your device is connected to
    your Windows computer as a portable device, it is not necessary
    to safely disconnect.
    1 Complete an action:
    • For Windows computers, select the Safely Remove
    Hardware icon in the system tray, and select your device.
    • For Mac computers, drag the volume icon to the trash.
    2 Disconnect the cable from your computer.

    ANT+ Sensors
    Your device can be used with wireless ANT+ sensors. For more
    information about compatibility and purchasing optional sensors,
    go to http://buy.garmin.com.

    À
    Á

    Pairing Your ANT+ Sensors
    Before you can pair, you must put on the heart rate monitor or
    install the sensor.
    Pairing is the connecting of ANT+ wireless sensors, for example,
    connecting a heart rate monitor with your Garmin device.
    1 Bring the device within 3 m (10 ft.) of the sensor.
    NOTE: Stay 10 m (33 ft.) away from other riders' ANT+
    sensors while pairing.
    2 Select > Sensors > Add Sensor.
    3 Select an option:
    • Select a sensor type.
    • Select Search All to search for all nearby sensors.
    A list of available sensors appears.
    4 Select one or more sensors to pair with your device.
    5 Select Add.
    When the sensor is paired with your device, the sensor status
    is Connected. You can customize a data field to display
    sensor data.

    Situational Awareness
    Your Edge device can be used with Varia™ smart bike lights and
    rearview radar to improve situational awareness. See the
    owner's manual for your Varia device for more information.
    NOTE: You may need to update the Edge software before
    pairing Varia devices (Updating the Software, page 13).
    8

    Lap key. Select to mark a new lap.
    Action key. Select to start and stop the timer. Hold to turn on the
    backlight.
    NOTE: This is the default functionality of the action key. The action
    key functions are programmable.

    Â

    Page key. Select to scroll forward through the data pages. Hold to
    scroll through the data pages in reverse.

    Ã

    Status LED.

    Status LED
    LED Activity

    Status

    Flashing green

    Searching for a paired device.

    Alternating red and green

    Attempting to pair with a new device.

    12 rapid green flashes

    Successfully paired with a device.

    Four rapid green flashes

    Successfully sent a command to a device.

    Four rapid red flashes

    Failed to send a command to a device.

    Pairing the Remote with Your Edge Device
    The first time you connect the Edge remote to your Edge device,
    you must pair the remote with your device.
    1 Bring the remote within 3 m (10 ft.) of the device.
    NOTE: Stay 10 m (33 ft.) away from other ANT+ sensors
    while pairing.
    2 From the Edge home screen, select > Sensors > Add
    Sensor > Edge Remote.
    3 On the remote, hold two keys simultaneously until the status
    LED starts alternating green and red, and release the keys.
    The remote searches for your device. When the remote pairs
    successfully, the status LED flashes green 12 times, and the
    remote name appears on the device.
    ANT+ Sensors



  • Page 13

    4 Select the remote, and select Add.
    After the remote is paired, it connects to your device whenever
    the device is in range and turned on.

    Customizing the Action Key
    1 From the Edge home screen, select

    > Sensors > Edge
    Remote > Sensor Details.
    2 Select Single Press or Press and Hold.
    3 Select a function for the action key.
    For example, you can set the action key to display the map or
    turn on the backlight.

    5 Install the new battery into the back plate with the positive
    side facing down.

    6 Verify the gasket Á is fully seated in the groove.

    Using the Mounts
    Several mounts are available for your remote, either included
    with the product or as an optional accessory. The mounts allow
    you to attach the remote to your body, your bike, or other
    objects.
    • Align two of the notches À with the sides of the mount, and
    press the remote into the mount until it clicks.

    7 Replace the backplate, aligning the post  with the gap in the
    circuit board Ã.
    8 Replace and tighten the three screws.
    NOTE: Do not overtighten.
    • Press gently on the release tab Á, and lift the remote from
    the mount.

    Replacing the Battery
    WARNING
    Do not use a sharp object to remove batteries.
    Keep the battery away from children.
    Never put batteries in mouth. If swallowed, contact your
    physician or local poison control center.
    Replaceable coin cell batteries may contain perchlorate
    material. Special handling may apply. See www.dtsc.ca.gov
    /hazardouswaste/perchlorate.

    Customizing Your Device
    Setting Up Your User Profile
    You can update your gender, age, weight, height, and lifetime
    athlete settings. The device uses this information to calculate
    accurate ride data.
    1 Select > User Profile.
    2 Select an option.

    About Lifetime Athletes
    A lifetime athlete is an individual who has trained intensely for
    many years (with the exception of minor injuries) and has a
    resting heart rate of 60 beats per minute (bpm) or less.

    CAUTION
    Contact your local waste disposal department to properly
    recycle the batteries.

    Training Zones

    Before you can replace the battery, you must have a small
    Phillips screwdriver, a small flat screwdriver, and a CR2032
    lithium coin-cell battery.
    1 Using a Phillips screwdriver, remove the three screws from
    the back plate À.

    Setting Your Heart Rate Zones

    2 Remove the back plate from the remote.
    3 Wrap the end of a small flat screwdriver with tape.
    The tape protects the battery, battery compartment, and
    contacts from damage.
    4 Carefully pry the battery from the back plate.

    Customizing Your Device

    • Heart rate zones (Setting Your Heart Rate Zones, page 9)
    • Power zones (Setting Your Power Zones, page 10)
    The device uses your user profile information from the initial
    setup to determine your heart rate zones. You can manually
    adjust the heart rate zones according to your fitness goals
    (Fitness Goals, page 10). For the most accurate calorie data
    during your activity, you should set your maximum heart rate,
    resting heart rate, and heart rate zones.
    1 Select > Training Zones > Heart Rate Zones.
    2 Enter your maximum and resting heart rate values.
    The zone values update automatically, but you can also edit
    each value manually.
    3 Select Based On:.
    4 Select an option:
    • Select BPM to view and edit the zones in beats per
    minute.
    • Select % Max. to view and edit the zones as a percentage
    of your maximum heart rate.
    • Select % HRR to view and edit the zones as a percentage
    of your resting heart rate.
    9



  • Page 14

    Fitness Goals
    Knowing your heart rate zones can help you measure and
    improve your fitness by understanding and applying these
    principles.
    • Your heart rate is a good measure of exercise intensity.
    • Training in certain heart rate zones can help you improve
    cardiovascular capacity and strength.
    • Knowing your heart rate zones can prevent you from
    overtraining and can decrease your risk of injury.
    If you know your maximum heart rate, you can use the table
    (Heart Rate Zone Calculations, page 14) to determine the best
    heart rate zone for your fitness objectives.
    If you do not know your maximum heart rate, use one of the
    calculators available on the Internet. Some gyms and health
    centers can provide a test that measures maximum heart rate.
    The default maximum heart rate is 220 minus your age.

    Setting Your Power Zones
    The values for the zones are default values and may not match
    your personal abilities. You can manually adjust your zones on
    the device or using Garmin Connect. If you know your functional
    threshold power (FTP) value, you can enter it and allow the
    software to calculate your power zones automatically.
    1 Select > Training Zones > Power Zones.
    2 Enter your FTP value.
    3 Select Based On:.
    4 Select an option:
    • Select watts to view and edit the zones in watts.
    • Select % FTP to view and edit the zones as a percentage
    of your functional threshold power.

    Bluetooth Settings
    Select > Bluetooth.
    Enable: Enables Bluetooth wireless technology.
    NOTE: Other Bluetooth settings appear only when Bluetooth
    wireless technology is enabled.
    Friendly Name: Allows you to enter a friendly name that
    identifies your devices with Bluetooth wireless technology.
    Pair Smartphone: Connects your device with a compatible
    Bluetooth enabled smartphone. This setting allows you to use
    Bluetooth connected features, including LiveTrack and
    activity uploads to Garmin Connect.
    Pair Bluetooth Smart: Connects your device with a compatible
    smartphone using Bluetooth Smart wireless technology. This
    setting allows you to use call and text features.
    NOTE: This setting appears only after the device is paired
    with a compatible smartphone equipped with Bluetooth Smart
    wireless technology.
    Call and Text Alerts: Allows you to enable phone notifications
    from your compatible smartphone.
    Missed Calls and Texts: Displays missed phone notifications
    from your compatible smartphone.

    Wi‑Fi Settings
    Select > Wi-Fi.
    Wi-Fi: Enables Wi‑Fi wireless technology.
    NOTE: Other Wi‑Fi settings appear only when Wi‑Fi is
    enabled.
    Auto Upload: Allows you to upload activities automatically over
    a known wireless network.
    Add Network: Connects your device to a wireless network.

    Updating Your Activity Settings
    1 Select
    10

    > Activity Settings.

    2 Select an option:
    • Select Data Screens to customize the data screens and
    data fields (Customizing the Data Screens, page 10).
    • Select Map to customize the map settings (Map Settings,
    page 10).
    • Select Routing to customize your route settings (Route
    Settings, page 11).
    • Select Alerts to customize your training alerts (Alerts,
    page 11).
    • Select Auto Features > Auto Lap to set how laps are
    triggered (Auto Lap , page 11).
    • Select Auto Features > Auto Pause to change when the
    timer automatically pauses (Using Auto Pause,
    page 11).
    • Select Auto Features > Auto Sleep to automatically enter
    sleep mode after five minutes of inactivity (Using Auto
    Sleep, page 11).
    • Select Auto Features > Auto Scroll to customize the
    display of the training data pages when the timer is
    running (Using Auto Scroll, page 11).
    • Select Start Notice to customize the start notice mode
    (Changing the Start Notice, page 12).
    All changes are saved to the activity settings.
    ®

    Customizing the Data Screens
    1 Select > Activity Settings.
    2 Select Data Screens.
    3 Select a data screen.
    4 If necessary, enable the data screen.
    5 Select the number of data fields to appear on the screen.
    6 Select .
    7 Select a data field to change it.
    8 Select .
    Map Settings
    Select > Activity Settings > Map.
    Orientation: Sets how the map is shown on the page.
    Auto Zoom: Automatically selects a zoom level for the map.
    When Off is selected, you must zoom in or out manually.
    Guide Text: Sets when the turn-by-turn navigation prompts are
    shown (requires routable maps).
    Map Visibility: Allows you to set advanced map features.
    Map Information: Enables or disables the maps currently
    loaded on the device.
    Changing the Map Orientation
    1 From the home screen, select > Activity Settings > Map
    > Orientation.
    2 Select an option:
    • Select North Up to show north at the top of the page.
    • Select Track Up to show your current direction of travel at
    the top of the page.
    • Select 3D Mode to show an automotive perspective with
    the direction of travel at the top.
    Advanced Map Settings
    Select > Activity Settings > Map > Map Visibility.
    Map Visibility Mode: Auto and High Contrast have preset
    values. You can choose Custom to set each value.
    Zoom Levels: Sets map items to draw or appear at or below the
    selected zoom level.
    Text Size: Sets the text size for map items.
    Detail: Sets the amount of detail shown on the map. Showing
    more detail may cause the map to redraw more slowly.
    Customizing Your Device



  • Page 15

    Shaded Relief: Shows detail relief on the map (if available) or
    turns off shading.
    Purchasing Additional Maps
    Before purchasing additional maps, you should determine the
    version of the maps that are loaded on your device.
    1 Select > Activity Settings.
    2 Select Map > Map Information.
    3 Select a map.
    4 Select .
    5 Go to http://buy.garmin.com, or contact your Garmin dealer.

    Route Settings
    Select > Activity Settings > Routing.
    Routing Mode: Sets the transportation method to optimize your
    route.
    Calculation Method: Sets the method used to calculate your
    route.
    Lock on Road: Locks the position icon, which represents your
    position on the map, onto the nearest road.
    Avoidance Setup: Sets the road types to avoid while
    navigating.
    Recalculation: Automatically recalculates the route when you
    deviate from the route.

    Alerts
    You can use alerts to train toward specific time, distance,
    calorie, heart rate, cadence, and power goals.
    Setting Range Alerts
    If you have an optional heart rate monitor, cadence sensor, or
    power meter, you can set up range alerts. A range alert notifies
    you when the device measurement is above or below a
    specified range of values. For example, you can set the device
    to alert you when your cadence is below 40 RPM and over
    90 RPM. You can also use a training zone (Training Zones,
    page 9) for the range alert.
    1 Select > Activity Settings.
    2 Select Alerts.
    3 Select Heart Rate Alert, Cadence Alert, or Power Alert.
    4 If necessary, turn on the alert.
    5 Enter the minimum and maximum values, or select zones.
    6 If necessary, select .
    Each time you exceed or drop below the specified range, a
    message appears. The device also beeps if audible tones are
    turned on (Setting the Device Tones, page 12).
    Setting a Recurring Alert
    A recurring alert notifies you each time the device records a
    specified value or interval. For example, you can set the device
    to alert you every 30 minutes.
    1 Select > Activity Settings.
    2 Select Alerts.
    3 Select Time Alert, Distance Alert, or Calorie Alert.
    4 Turn on the alert.
    5 Enter a value.
    6 Select .
    Each time you reach the alert value, a message appears. The
    device also beeps if audible tones are turned on (Setting the
    Device Tones, page 12).

    Auto Lap

    ®

    Marking Laps by Position
    You can use the Auto Lap feature to mark the lap at a specific
    position automatically. This feature is helpful for comparing your
    Customizing Your Device

    performance over different parts of a ride (for example, a long
    climb or training sprints). During courses, you can use the By
    Position option to trigger laps at all of the lap positions saved in
    the course.
    1 Select > Activity Settings.
    2 Select Auto Features > Auto Lap > Auto Lap Trigger > By
    Position > Lap At.
    3 Select an option:
    • Select Lap Press Only to trigger the lap counter each
    time you select
    and each time you pass any of those
    locations again.
    • Select Start and Lap to trigger the lap counter at the GPS
    location where you select
    and at any location during
    the ride where you select
    .
    • Select Mark and Lap to trigger the lap counter at a
    specific GPS location marked before the ride and at any
    location during the ride where you select
    .
    4 If necessary, customize the lap data fields (Customizing the
    Data Screens, page 10).
    Marking Laps by Distance
    You can use the Auto Lap feature to mark the lap at a specific
    distance automatically. This feature is helpful for comparing your
    performance over different parts of a ride (for example, every 10
    miles or 40 kilometers).
    1 Select > Activity Settings.
    2 Select Auto Features > Auto Lap > Auto Lap Trigger > By
    Distance > Lap At.
    3 Enter a value.
    4 If necessary, customize the lap data fields (Customizing the
    Data Screens, page 10).

    Using Auto Pause
    You can use the Auto Pause feature to pause the timer
    automatically when you stop moving or when your speed drops
    below a specified value. This feature is helpful if your ride
    includes stop lights or other places where you need to slow
    down or stop.
    NOTE: History is not recorded while the timer is stopped or
    paused.
    1 Select > Activity Settings.
    2 Select Auto Features > Auto Pause.
    3 Select an option:
    • Select When Stopped to pause the timer automatically
    when you stop moving.
    • Select Custom Speed to pause the timer automatically
    when your speed drops below a specified value.
    4 If necessary, customize optional time data fields
    (Customizing the Data Screens, page 10).
    ®

    Using Auto Sleep
    You can use the Auto Sleep feature to automatically enter sleep
    mode after 5 minutes of inactivity. During sleep mode, the
    screen is turned off and the ANT+ sensors, Bluetooth, and GPS
    are disconnected.
    Wi‑Fi continues to run while the device is asleep.
    1 Select > Activity Settings.
    2 Select Auto Features > Auto Sleep.

    Using Auto Scroll
    You can use the Auto Scroll feature to automatically cycle
    through all of the training data screens while the timer is
    running.
    1 Select > Activity Settings.
    2 Select Auto Features > Auto Scroll.
    11



  • Page 16

    3 Select a display speed.
    Changing the Start Notice
    This feature automatically detects when your device has
    acquired satellites and is moving. It is a reminder to start the
    timer so you can record your ride data.
    1 Select > Activity Settings.
    2 Select Start Notice.
    3 Select an option:
    • Select Once.
    • Select Repeat > Repeat Delay to change the amount of
    time to delay the reminder.

    System Settings
    Select > System.
    • GPS Settings (GPS Settings, page 12)
    • Color Settings (Changing the Accent Color, page 12)
    • Display Settings (Display Settings, page 12)
    • Incident Detection Settings (Turning Incident Detection On
    and Off, page 5)
    • Data Recording Settings (Changing the Data Storage
    Location, page 7)
    • Unit Settings (Changing the Units of Measure, page 12)
    • Tone Settings (Setting the Device Tones, page 12)
    • Language Settings (Changing the Device Language,
    page 12)

    GPS Settings
    Changing the Satellite Setting
    For increased performance in challenging environments and
    faster GPS position location, you can enable GPS and
    GLONASS. Using GPS and GLONASS reduces battery life
    more quickly than using only GPS.
    1 Select > System > GPS > GPS Mode.
    2 Select an option.
    Setting Your Elevation
    If you have accurate elevation data for your present location,
    you can manually calibrate the altimeter on your device.
    1 From the home screen, select > System > GPS > Set
    Elevation.
    2 Enter the elevation, and select .

    Color Mode: Sets the device to display day or night colors. You
    can select Auto to allow the device to automatically set day or
    night colors based on the time of day.
    Orientation: Sets the device to display in portrait or landscape
    mode.
    Screen Capture: Allows you to save the image on the device
    screen.

    Changing the Units of Measure
    You can customize units of measure for distance and speed,
    elevation, temperature, weight, position format, and time format.
    1 Select > System > Units.
    2 Select a measurement type.
    3 Select a unit of measure for the setting.

    Setting the Device Tones
    From the home screen, select

    > System > Tones.

    Changing the Device Language
    From the home screen, select

    > System > Language.

    Changing the Configuration Settings
    You can modify all of the settings you configured in the initial
    setup.
    1 Select > System > Device Reset > Initial Setup.
    2 Follow the on-screen instructions.

    Time Zones
    Each time you turn on the device and acquire satellites, the
    device automatically detects your time zone and the current time
    of day.

    Device Information
    Specifications
    Edge Specifications
    Battery type

    Rechargeable, built-in lithium-ion battery

    Battery life

    15 hours, typical usage

    Operating temperature From -20º to 60ºC (from -4º to 140ºF)
    range
    Charging temperature
    range

    From 0º to 40ºC (from 32º to 104ºF)

    Radio frequency/
    protocol

    2.4 GHz ANT+ wireless communications
    protocol
    Bluetooth Smart wireless technology
    Wi‑Fi wireless technology

    Water rating

    IEC 60529 IPX7*

    Viewing Satellites
    The satellite page shows your current GPS satellite information.
    For more information about GPS, go to www.garmin.com
    /aboutGPS.
    From the home screen, select > System > GPS > View
    Satellites.
    GPS accuracy appears at the bottom of the page. The green
    bars represent the strength of each satellite signal received (the
    number of the satellite appears below each bar).

    Remote Specifications

    Changing the Accent Color

    Battery type

    User-replaceable CR2032 (3 V)

    You can change the accent color on the device.
    1 Select > System > Color.
    2 Select an accent color.

    Battery life

    Up to 1.5 yr. (1 hr./day)

    Operating temperature
    range

    From -10° to 50°C (from 14° to 122°F)

    Display Settings
    Select > System > Display.
    Auto Brightness: Automatically adjusts the backlight brightness
    based on the ambient light.
    Backlight Timeout: Sets the length of time before the backlight
    turns off.

    12

    *The device withstands incidental exposure to water of up to 1 m
    for up to 30 min. For more information, go to www.garmin.com
    /waterrating.

    Radio frequency/protocol 2.4 GHz ANT+ wireless communications
    protocol
    Water rating

    5 ATM*

    *The device withstands pressure equivalent to a depth of 50 m.
    For more information, go to www.garmin.com/waterrating.

    Device Information



  • Page 17

    Device Care
    NOTICE
    Do not store the device where prolonged exposure to extreme
    temperatures can occur, because it can cause permanent
    damage.
    Never use a hard or sharp object to operate the touchscreen, or
    damage may result.
    Avoid chemical cleaners, solvents, and insect repellents that can
    damage plastic components and finishes.
    Secure the weather cap tightly to prevent damage to the USB
    port.

    Cleaning the Device
    1 Wipe the device using a cloth dampened with a mild

    detergent solution.
    2 Wipe it dry.

    Troubleshooting
    Resetting the Device
    If the device stops responding, you may need to reset it. This
    does not erase any of your data or settings.
    1 Hold for 10 seconds.
    2 Hold for one second to turn on the device.

    Clearing User Data
    You can restore all of the device settings to the factory default
    values.
    NOTE: This deletes all user-entered information, but it does not
    delete your history.
    Select > System > Device Reset > Factory Reset > .

    Saving Energy While Charging the Device
    You can turn off the device screen and all other features while
    charging.
    1 Connect your device to an external power source.
    2 Hold for 4 to 5 seconds.
    The screen turns off, and the device goes into a low power,
    battery charging mode.
    3 Charge the device completely.

    Maximizing Battery Life
    • Decrease the backlight or shorten the backlight timeout
    (Using the Backlight, page 2).
    • Turn on the Auto Sleep feature (Using Auto Sleep, page 11).
    • Turn off the Bluetooth wireless feature (Bluetooth Settings,
    page 10).
    • Turn off wireless connectivity (Wi‑Fi Settings, page 10).

    Updating the Software
    Before you can update your device software, you must have a
    Garmin Connect account, and you must download the Garmin
    Express application.
    1 Connect the device to your computer using the USB cable.
    When new software is available, Garmin Express sends it to
    your device.
    2 Follow the on-screen instructions.
    3 Do not disconnect your device from the computer during the
    update process.
    NOTE: If you have already used Garmin Express to set up
    your device with Wi‑Fi connectivity, Garmin Connect can

    Troubleshooting

    automatically download available software updates to your
    device when it connects using Wi‑Fi.

    Support and Updates
    Garmin Express (www.garmin.com/express) provides easy
    access to these services for Garmin devices.
    • Product registration
    • Product manuals
    • Software updates
    • Data uploads to Garmin Connect
    • Map, chart, or course updates

    Getting More Information
    • Go to www.garmin.com/intosports.
    • Go to www.garmin.com/learningcenter.
    • Go to http://buy.garmin.com, or contact your Garmin dealer
    for information about optional accessories and replacement
    parts.

    Getting the Owner's Manual
    You can get the most recent owner's manual from the web.
    1 Go to www.garmin.com/manuals/edgeexplore1000.
    2 View or download the full owner's manual in your preferred
    format.

    Viewing Device Information
    You can view the unit ID, software version, and license
    agreement.
    Select > System > About.

    Improving GPS Satellite Reception
    • Frequently sync the device to your Garmin Connect account:
    ◦ Connect your device to a computer using the USB cable
    and the Garmin Express application.
    ◦ Sync your device to the Garmin Connect Mobile app using
    your Bluetooth enabled smartphone.
    ◦ Connect your device to your Garmin Connect account
    using a Wi‑Fi wireless network.
    While connected to your Garmin Connect account, the device
    downloads several days of satellite data, allowing it to quickly
    locate satellite signals.
    • Take your device outside to an open area away from tall
    buildings and trees.
    • Remain stationary for a few minutes.

    Temperature Readings
    The device may display temperature readings that are higher
    than the actual air temperature if the device is placed in direct
    sunlight, held in your hand, or is charging with an external
    battery pack. Also, the device will take some time to adjust to
    significant changes in temperature.

    Replacement O-rings
    Replacement bands (O-rings) are available for the standard
    mount in two sizes:
    • 1.3 × 1.5 × 0.9 in. AS568-125
    • 1.7 × 1.9 × 0.9 in. AS568-131
    NOTE: Use Ethylene Propylene Diene Monomer (EPDM)
    replacement bands only. Go to http://buy.garmin.com, or contact
    your Garmin dealer.

    13



  • Page 18

    Appendix
    Data Fields
    Some data fields require ANT+ accessories to display data.
    Balance: The current left/right power balance.
    Balance - Avg.: The average left/right power balance for the
    current activity.
    Balance - Lap: The average left/right power balance for the
    current lap.
    Battery Level: The remaining battery power.
    Battery Status: The remaining battery power of a bike light
    accessory.
    Beam Angle Status: The headlight beam mode.
    Cadence: Cycling. The number of revolutions of the crank arm.
    Your device must be connected to a cadence accessory for
    this data to appear.
    Cadence - Avg.: Cycling. The average cadence for the current
    activity.
    Cadence - Lap: Cycling. The average cadence for the current
    lap.
    Calories: The amount of total calories burned.
    Course Pt. Dist.: The remaining distance to the next point on
    the course.
    Dist. - Lap: The distance traveled for the current lap.
    Dist. - Last Lap: The distance traveled for the last completed
    lap.
    Dist. to Dest.: The remaining distance to the final destination.
    You must be navigating for this data to appear.
    Dist. to Go: During a workout or course, the remaining distance
    when you are using a distance target.
    Dist. to Next: The remaining distance to the next waypoint on
    the route. You must be navigating for this data to appear.
    Distance: The distance traveled for the current track or activity.
    Elevation: The altitude of your current location above or below
    sea level.
    ETA at Destination: The estimated time of day when you will
    reach the final destination (adjusted to the local time of the
    destination). You must be navigating for this data to appear.
    ETA at Next: The estimated time of day when you will reach the
    next waypoint on the route (adjusted to the local time of the
    waypoint). You must be navigating for this data to appear.
    GPS Accuracy: The margin of error for your exact location. For
    example, your GPS location is accurate to within +/- 3.65 m
    (12 ft.).
    GPS Signal Strength: The strength of the GPS satellite signal.
    Grade: The calculation of rise (elevation) over run (distance).
    For example, if for every 3 m (10 ft.) you climb you travel
    60 m (200 ft.), the grade is 5%.
    Heading: The direction you are moving.
    Heart Rate: Your heart rate in beats per minute (bpm). Your
    device must be connected to a compatible heart rate monitor.
    HR - Avg.: The average heart rate for the current activity.
    HR Graph: A line graph showing your current heart rate zone (1
    to 5).
    HR - Lap: The average heart rate for the current lap.
    HR Zone: The current range of your heart rate (1 to 5). The
    default zones are based on your user profile and maximum
    heart rate (220 minus your age).
    Laps: The number of laps completed for the current activity.
    Light Configuration: The light network configuration mode.
    Lights Connected: The number of connected lights.
    14

    Location at Dest.: The last point on the route or course.
    Location at Next: The next point on the route or course.
    Odometer: A running tally of the distance traveled for all trips.
    This total does not clear when resetting the trip data.
    Power: The current power output in watts. Your device must be
    connected to a compatible power meter.
    Power - Avg.: The average power output for the current activity.
    Power - kJ: The accumulated work performed (power output) in
    kilojoules.
    Power - Lap: The average power output for the current lap.
    Power - Last Lap: The average power output for the last
    completed lap.
    Power - Max.: The top power output for the current activity.
    Power Zone: The current range of power output (1 to 7) based
    on your FTP or custom settings.
    Speed: The current rate of travel.
    Speed - Avg.: The average speed for the current activity.
    Speed - Lap: The average speed for the current lap.
    Speed - Max.: The top speed for the current activity.
    Sunrise: The time of sunrise based on your GPS position.
    Sunset: The time of sunset based on your GPS position.
    Temperature: The temperature of the air. Your body
    temperature affects the temperature sensor.
    Time: The stopwatch time for the current activity.
    Time - Avg. Lap: The average lap time for the current activity.
    Time - Elapsed: The total time recorded. For example, if you
    start the timer and run for 10 minutes, then stop the timer for
    5 minutes, then start the timer and run for 20 minutes, your
    elapsed time is 35 minutes.
    Time - Lap: The stopwatch time for the current lap.
    Time - Last Lap: The stopwatch time for the last completed lap.
    Time of Day: The time of day based on your current location
    and time settings (format, time zone, daylight saving time).
    Time to Dest.: The estimated time remaining before you reach
    the destination. You must be navigating for this data to
    appear.
    Time to Go: The time remaining in a course.
    Time to Next: The estimated time remaining before you reach
    the next waypoint in the route. You must be navigating for
    this data to appear.
    Total Ascent: The total elevation distance ascended since the
    last reset.
    Total Descent: The total elevation distance descended since
    the last reset.
    Vertical Speed: The rate of ascent or descent over time.
    VS - 30s Avg.: The 30-second moving average of vertical
    speed.

    Heart Rate Zone Calculations
    Zone % of
    Maximum
    Heart Rate

    Perceived Exertion

    Benefits

    1

    50–60%

    Relaxed, easy pace,
    rhythmic breathing

    Beginning-level
    aerobic training,
    reduces stress

    2

    60–70%

    Comfortable pace,
    slightly deeper
    breathing, conversation
    possible

    Basic cardiovascular
    training, good
    recovery pace

    3

    70–80%

    Moderate pace, more
    difficult to hold
    conversation

    Improved aerobic
    capacity, optimal
    cardiovascular training
    Appendix



  • Page 19

    Zone % of
    Maximum
    Heart Rate

    Perceived Exertion

    Benefits

    4

    80–90%

    Fast pace and a bit
    Improved anaerobic
    uncomfortable, breathing capacity and
    forceful
    threshold, improved
    speed

    5

    90–100%

    Sprinting pace,
    unsustainable for long
    period of time, labored
    breathing

    Anaerobic and
    muscular endurance,
    increased power

    Software License Agreement
    BY USING THE DEVICE, YOU AGREE TO BE BOUND BY THE
    TERMS AND CONDITIONS OF THE FOLLOWING SOFTWARE
    LICENSE AGREEMENT. PLEASE READ THIS AGREEMENT
    CAREFULLY.
    Garmin Ltd. and its subsidiaries (“Garmin”) grant you a limited
    license to use the software embedded in this device (the
    “Software”) in binary executable form in the normal operation of
    the product. Title, ownership rights, and intellectual property
    rights in and to the Software remain in Garmin and/or its thirdparty providers.
    You acknowledge that the Software is the property of Garmin
    and/or its third-party providers and is protected under the United
    States of America copyright laws and international copyright
    treaties. You further acknowledge that the structure,
    organization, and code of the Software, for which source code is
    not provided, are valuable trade secrets of Garmin and/or its
    third-party providers and that the Software in source code form
    remains a valuable trade secret of Garmin and/or its third-party
    providers. You agree not to decompile, disassemble, modify,
    reverse assemble, reverse engineer, or reduce to human
    readable form the Software or any part thereof or create any
    derivative works based on the Software. You agree not to export
    or re-export the Software to any country in violation of the export
    control laws of the United States of America or the export control
    laws of any other applicable country.

    Appendix

    15



  • Page 20

    Index
    A
    accessories 8, 13
    alerts 11
    altimeter, calibrating 12
    ANT+ sensors 2, 8
    pairing 8
    power meters 8
    applications 6, 7
    Auto Lap 11
    Auto Pause 11
    auto scroll 11
    auto sleep 11

    B
    back to start 4
    backlight 2, 12
    bands 13
    battery
    charging 1, 13
    maximizing 13
    replacing 9
    type 1
    Bluetooth technology 6, 7, 10

    C
    cadence, alerts 11
    calendar 6
    calibrating, power meter 8
    calorie, alerts 11
    charging 13
    cleaning the device 13
    computer, connecting 7
    coordinates 5
    courses 3, 4
    creating 3, 4
    deleting 3, 4
    editing 3, 4
    loading 3
    navigating 4
    settings 3
    customizing the device 10

    D
    data
    recording 7
    screens 10
    storing 6
    transferring 6, 7
    data fields 10, 14
    deleting, all user data 8, 13
    device
    care 13
    resetting 13
    display settings 12
    distance, alerts 11

    E
    elevation 12
    emergency contacts 5

    F
    files, transferring 7
    finding locations, near your location 5

    G
    Garmin Connect 3, 6, 7
    Garmin Express 7
    registering the device 13
    updating software 13
    GLONASS 12
    GPS 12
    satellite page 12
    signal 2, 3, 13

    H
    heart rate
    alerts 11
    zones 9, 10, 14
    16

    history 2, 6
    deleting 6
    sending to computer 6

    I
    icons 2
    incident detection 5
    initial setup 12
    installing 1

    K
    keys 2, 8, 9

    L
    language 12
    laps 2
    lifetime athlete 9
    locations 4
    deleting 5
    editing 5
    finding with the map 4
    recently found 4
    locking, screen 2

    M
    maps 4
    finding locations 4
    orientation 10
    purchasing 11
    settings 10
    updating 13
    zoom 10
    memory card 7
    microSD card. See memory card
    mounting the device 1, 9

    system settings 12

    T
    temperature 13
    time, alerts 11
    time zones 12
    timer 2, 6
    tones 12
    training, screens 2, 10
    transferring, files 7
    troubleshooting 13

    U
    unit ID 13
    units of measure 12
    updates, software 13
    USB 13
    disconnecting 8
    user data, deleting 8
    user profile 2, 9

    W
    waypoints, projecting 5
    Wi-Fi 2
    Wi‑Fi 10, 13
    connecting 7
    wireless devices 8

    Z
    zones
    power 10
    time 12

    N
    navigation 4, 5
    back to start 4

    O
    O-rings. See bands
    on-screen buttons 2

    P
    pairing 2, 7
    ANT+ sensors 8
    remote control 8
    personal records 6
    deleting 6
    power (force)
    alerts 11
    zones 10
    product registration 13
    profiles, user 9

    R
    registering the device 13
    remote control 8
    pairing 8
    replacing the battery 9
    resetting the device 13
    routes
    creating 3
    settings 11

    S
    satellite page 12
    satellite signals 2, 3, 13
    saving activities 2
    screen 12
    settings 2, 10, 12
    device 12
    sleep mode 11
    smartphone 2, 6, 10
    software
    updating 13
    version 13
    software license agreement 13, 15
    specifications 12
    start notice message 12
    storing data 6, 7
    Index



  • Page 21



  • Page 22

    www.garmin.com/support
    +43 (0) 820 220230

    + 32 2 672 52 54

    0800 770 4960

    1-866-429-9296

    +385 1 5508 272
    +385 1 5508 271

    +420 221 985466
    +420 221 985465

    + 45 4810 5050

    + 358 9 6937 9758

    + 331 55 69 33 99

    + 39 02 36 699699

    (+52) 001-855-792-7671

    0800 0233937

    +47 815 69 555

    00800 4412 454
    +44 2380 662 915

    (+35) 1214 447 460

    +386 4 27 92 500

    0861 GARMIN (427 646)
    +27 (0)11 251 9999

    +34 93 275 44 97

    + 46 7744 52020

    +886 2 2642-9199 ext 2

    0808 238 0000
    +44 (0) 870 8501242

    +49 (0) 89 858364880
    zum Ortstarif - Mobilfunk
    kann abweichen

    913-397-8200
    1-800-800-1020

    © 2015 Garmin Ltd. or its subsidiaries






Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Garmin Edge Explore 1000 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Holen Sie sich Ihr Benutzerhandbuch per E-Mail

Geben Sie Ihre E-Mail-Adresse ein, um das Handbuch zu erhalten von Garmin Edge Explore 1000 in der Sprache / Sprachen: Englisch als Anhang in Ihrer E-Mail.

Das Handbuch ist 3,12 mb groß.

 

Sie erhalten das Handbuch in Ihrer E-Mail innerhalb von Minuten. Wenn Sie keine E-Mail erhalten haben, haben Sie wahrscheinlich die falsche E-Mail-Adresse eingegeben oder Ihre Mailbox ist zu voll. Darüber hinaus kann es sein, dass Ihr ISP eine maximale Größe für E-Mails empfangen kann.

Andere Handbücher von Garmin Edge Explore 1000

Garmin Edge Explore 1000 Bedienungsanleitung - Deutsch - 24 seiten

Garmin Edge Explore 1000 Bedienungsanleitung - Holländisch - 22 seiten

Garmin Edge Explore 1000 Bedienungsanleitung - Französisch - 24 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info