Zoom out
Zoom in
Vorherige Seite
1/20
Nächste Seite
Edge
®
Explore 820
Owner’s Manual
June 2016 190-02077-10_0A
1

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Inhalt der Seiten


  • Page 1

    Edge Explore 820
    ®

    Owner’s Manual

    June 2016

    190-02077-10_0A



  • Page 2

    All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the
    right to change or improve its products and to make changes in the content of this manual without obligation to notify any person or organization of such
    changes or improvements. Go to www.garmin.com for current updates and supplemental information concerning the use of this product.
    Garmin , the Garmin logo, ANT+ , Auto Lap , Auto Pause , and Edge are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other
    countries. Connect IQ™, Garmin Connect™, Garmin Express™, Varia™, and Varia Vision™ are trademarks of Garmin Ltd. or its subsidiaries. These trademarks
    may not be used without the express permission of Garmin.
    ®

    ®

    ®

    ®

    ®

    The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Garmin is under license. Mac is a trademark of
    Apple, Inc., registered in the U.S. and other countries. Windows is a registered trademark of Microsoft Corporation in the United States and other countries.
    Other trademarks and trade names are those of their respective owners.
    ®

    ®

    ®

    This product is ANT+ certified. Visit www.thisisant.com/directory for a list of compatible products and apps.
    ®

    M/N: AA3001



  • Page 3

    Table of Contents
    Introduction.....................................................................1
    Getting Started ............................................................................ 1
    Charging the Device ................................................................... 1
    About the Battery ................................................................... 1
    Installing the Standard Mount ..................................................... 1
    Installing the Out-Front Mount .................................................... 1
    Releasing the Edge ................................................................ 2
    Keys ............................................................................................ 2
    Viewing the Connections Screen ........................................... 2
    Home Screen Overview ......................................................... 2

    Navigation....................................................................... 2
    Going for a Ride .......................................................................... 2
    Acquiring Satellite Signals ..................................................... 3
    Locations .................................................................................... 3
    Marking Your Location ........................................................... 3
    Saving Locations from the Map ............................................. 3
    Navigating to a Location ........................................................ 3
    Navigating to Known Coordinates ......................................... 3
    Navigating Back to Start ........................................................ 3
    Stopping Navigation ............................................................... 3
    Projecting a Location ............................................................. 3
    Editing Locations .................................................................... 3
    Deleting a Location ................................................................ 3
    Courses ...................................................................................... 3
    Following a Course From the Web ........................................ 4
    Planning and Riding a Course ............................................... 4
    Creating and Riding a Round-Trip Course ............................ 4
    Tips for Training with Courses ............................................... 4
    Viewing Course Details .......................................................... 4
    Stopping a Course ................................................................. 4
    Deleting a Course .................................................................. 5
    Course Options ...................................................................... 5
    Route Settings ............................................................................ 5
    Selecting an Activity for Route Calculation ............................ 5
    Map Settings ............................................................................... 5
    Changing the Map Orientation ............................................... 5

    Bluetooth® Connected Features .................................. 5
    Pairing Your Smartphone ........................................................... 5
    Starting a GroupTrack Session .............................................. 5
    Tips for GroupTrack Sessions ............................................... 6
    Transferring Files to Another Edge Device ................................. 6
    Playing Audio Alerts During Your Activity ................................... 6
    Incident Detection ....................................................................... 6
    Setting Up Incident Detection ................................................ 6
    Setting Up Rider Information and Emergency Contacts ........ 6
    Turning Incident Detection On and Off .................................. 6
    Viewing Your Emergency Contacts ....................................... 7
    Cancelling an Automated Message ....................................... 7
    Sending a Status Update After an Incident ............................ 7

    ANT+ Sensors................................................................. 7
    Pairing Your ANT+ Sensors ....................................................... 7
    Setting Your Heart Rate Zones .............................................. 7
    Situational Awareness ................................................................ 7

    Garmin Connect ..................................................................... 8
    Data Management ...................................................................... 8
    Connecting the Device to Your Computer ............................. 8
    Transferring Files to Your Device .......................................... 8
    Deleting Files ......................................................................... 8
    Disconnecting the USB Cable ................................................ 9

    Customizing Your Device.............................................. 9
    Connect IQ Downloadable Features .......................................... 9
    Setting Up Your User Profile ....................................................... 9
    About Lifetime Athletes .......................................................... 9
    Updating Your Activity Settings .................................................. 9
    Customizing the Data Screens .............................................. 9
    Alerts ...................................................................................... 9
    Auto Lap® .............................................................................. 9
    Using Auto Pause ................................................................ 10
    Using Auto Sleep ................................................................. 10
    Using Auto Scroll ................................................................. 10
    Starting the Timer Automatically .......................................... 10
    Bluetooth Settings .....................................................................10
    System Settings ........................................................................ 10
    Changing the Satellite Setting ............................................. 10
    Changing the Accent Color .................................................. 10
    Display Settings ................................................................... 10
    Data Recording Settings ...................................................... 10
    Changing the Units of Measure ........................................... 11
    Turning the Device Tones On and Off ................................. 11
    Changing the Device Language .......................................... 11
    Changing the Configuration Settings ................................... 11
    Time Zones .......................................................................... 11

    Device Information....................................................... 11
    Edge Specifications .................................................................. 11
    Device Care .............................................................................. 11
    Cleaning the Device ............................................................. 11

    Troubleshooting........................................................... 11
    Resetting the Device ................................................................. 11
    Clearing User Data .............................................................. 11
    Maximizing Battery Life ............................................................. 11
    Turning On Battery Save Mode ........................................... 11
    Improving GPS Satellite Reception .......................................... 11
    Setting Your Elevation .............................................................. 11
    Temperature Readings ............................................................. 12
    Replacement O-rings ................................................................ 12
    Viewing Device Information ...................................................... 12
    Updating the Software .............................................................. 12
    Support and Updates ................................................................ 12
    Getting More Information .......................................................... 12

    Appendix....................................................................... 12
    Data Fields ................................................................................ 12
    Heart Rate Zone Calculations ................................................... 13
    Wheel Size and Circumference ................................................ 13
    Software License Agreement ................................................... 13
    Radio Frequency Exposure ...................................................... 14

    Index .............................................................................. 15

    History............................................................................. 7
    Viewing Your Ride ...................................................................... 7
    Viewing Data Totals ............................................................... 7
    Viewing Your Time in Each Heart Rate Zone ........................ 7
    Deleting a Ride ........................................................................... 8
    Personal Records ....................................................................... 8
    Viewing Your Personal Records ............................................ 8
    Reverting a Personal Record ................................................. 8
    Deleting a Personal Record ................................................... 8
    Sending Your Ride to Garmin Connect ...................................... 8
    Table of Contents

    i



  • Page 4



  • Page 5

    Introduction
    WARNING
    See the Important Safety and Product Information guide in the
    product box for product warnings and other important
    information.
    Always consult your physician before you begin or modify any
    exercise program.

    1 Select a secure location to mount the device where it does
    not interfere with the safe operation of your bike.
    2 Place the rubber disk À on the back of the bike mount.
    The rubber tabs align with the back of the bike mount so it
    stays in place.

    Getting Started
    When using your device the first time, you should complete
    these tasks to set up the device and learn about the basic
    features.
    1 Charge the device (Charging the Device, page 1).
    2 Install the device using the standard mount (Installing the
    Standard Mount, page 1) or the out-front mount (Installing
    the Out-Front Mount, page 1).
    Turn
    on the device (Keys, page 2).
    3
    4 Locate satellites (Acquiring Satellite Signals, page 3).
    5 Go for a ride (Going for a Ride, page 2).
    6 Upload your ride to Garmin Connect™ (Sending Your Ride to
    Garmin Connect, page 8).

    3 Place the bike mount on the bike stem.
    4 Attach the bike mount securely using the two bands Á.
    5 Align the tabs on the back of the device with the bike mount
    notches Â.
    6 Press down slightly and turn the device clockwise until it
    locks into place.

    Charging the Device
    NOTICE
    To prevent corrosion, thoroughly dry the USB port, the weather
    cap, and the surrounding area before charging or connecting to
    a computer.
    The device is powered by a built-in lithium-ion battery that you
    can charge using a standard wall outlet or a USB port on your
    computer.
    NOTE: The device will not charge when outside the approved
    temperature range (Edge Specifications, page 11).
    1 Pull up the weather cap À from the USB port Á.

    Installing the Out-Front Mount
    1 Select a secure location to mount the Edge device where it

    does not interfere with the safe operation of your bike.
    2 Use the hex key to remove the screw À from the handlebar
    connector Á.

    2 Plug the small end of the USB cable into the USB port on the
    device.

    3 Plug the large end of the USB cable into an AC adapter or a
    computer USB port.
    4 Plug the AC adapter into a standard wall outlet.
    When you connect the device to a power source, the device
    turns on.
    5 Charge the device completely.

    About the Battery
    WARNING
    This device contains a lithium-ion battery. See the Important
    Safety and Product Information guide in the product box for
    product warnings and other important information.

    Installing the Standard Mount

    3 If necessary, remove the two screws on the back side of the
    mount Â, rotate the connector Ã, and replace the screws to
    4

    5
    6

    change the orientation of the mount.
    Place the rubber pad around the handlebar:
    • If the handlebar diameter is 25.4 mm, use the thicker pad.
    • If the handlebar diameter is 31.8 mm, use the thinner pad.
    Place the handlebar connector around the rubber pad.
    Replace and tighten the screw.
    NOTE: Garmin recommends a torque specification of 7 lbfin. (0.8 N-m). You should check the tightness of the screw
    periodically.
    Align the tabs on the back of the Edge device with the bike
    mount notches Ä.
    ®

    7

    For the best GPS reception, position the bike mount so the front
    of the device is oriented toward the sky. You can install the bike
    mount on the stem or the handlebars.

    Introduction

    1



  • Page 6

    Select to go for a ride.
    Where To? Select to mark a location, search for locations, and create
    or navigate a course.
    Courses

    Select to create a new course or access a saved course.
    Select to access your history, training options, personal
    records, contacts, and settings.
    Select to access your Connect IQ™ apps, widgets, and
    data fields.

    8 Press down slightly and turn the Edge device clockwise until
    it locks into place.

    Releasing the Edge
    1 Turn the Edge clockwise to unlock the device.
    2 Lift the Edge off the mount.

    Keys

    Using the Backlight
    You can tap the touchscreen to turn on the backlight.
    NOTE: You can adjust the backlight timeout (Display Settings,
    page 10).
    1 From the home screen or a data screen, swipe down from
    the top of the screen.
    2 Select Brightness, and use the arrows to manually adjust
    the brightness.
    Using the Touchscreen
    • When the timer is running, tap the screen to view the timer
    overlay.
    The timer overlay allows you to return to the home screen
    during a ride.
    • Select
    to return to the home screen.
    • Swipe or select the arrows to scroll.
    • Select
    to return to the previous page.
    • Select
    to save your changes and close the page.
    • Select to close the page and return to the previous page.
    • Select to search near a location.
    • Select to delete an item.
    • Select for more information.

    À

    Select to enter sleep mode and wake the device.
    Hold to turn the device on and off and lock the touchscreen.

    Á

    Select to mark a new lap.

    Â

    Select to start and stop the timer.

    Locking the Touchscreen
    You can lock the screen to prevent inadvertent screen touches.
    1 Hold .
    2 Select Lock Screen.

    Navigation

    Viewing the Connections Screen
    The connections screen displays the status of the GPS, ANT+
    sensors, and wireless connections.
    From the home screen or a data screen, swipe down from
    the top of the screen.

    ®

    Going for a Ride
    If you are using an ANT+ sensor or accessory, it can be paired
    and activated during initial setup.
    1 Hold to turn on the device.
    2 Go outside, and wait while the device locates satellites.
    The satellite bars turn green when the device is ready.
    3 From the home screen, select .
    4 Select to start the timer.

    The connections screen appears. A flashing icon means the
    device is searching.

    Home Screen Overview
    The home screen gives you quick access to all the features of
    the Edge device.

    NOTE: History is recorded only while the timer is running.

    5 Swipe left or right to view additional data screens.
    2

    Navigation



  • Page 7

    6
    7

    8
    9

    You can swipe down from the top of the data screens to view
    the connections screen.
    If necessary, tap the screen to view the timer overlay.
    Select
    to stop the timer.
    TIP: Before you save this ride and share it on your Garmin
    Connect account, you can change the ride type. Accurate
    ride type data is important for creating bike friendly courses.
    Select Save Ride.
    Select .

    Acquiring Satellite Signals
    The device may need a clear view of the sky to acquire satellite
    signals. The time and date are set automatically based on the
    GPS position.
    1 Go outdoors to an open area.
    The front of the device should be oriented toward the sky.
    2 Wait while the device locates satellites.
    It may take 30–60 seconds to locate satellite signals.

    Locations
    You can record and store locations in the device.

    Marking Your Location
    Before you can mark a location, you must locate satellites.
    If you want to remember landmarks or return to a certain spot,
    you can mark a location.
    1 Go for a ride.
    > Mark Location > .
    2 Select Where To? >

    Saving Locations from the Map
    > Search Select Area > A Map
    1 Select Where To? >
    2
    3
    4
    5

    Point.
    Browse the map for the location.
    Select the location.
    Location information appears at the top of the map.
    Select the location information.
    Select > .

    Navigating to a Location
    1 Select Where To?.
    2 Select an option:
    • Select Search Tools to navigate to a point of interest, city,
    intersection, or known coordinates.
    • Select Addresses to enter a specific address.
    • Select Saved Locations to navigate to a saved location.
    • Select Recent Finds to navigate to one of the last 50
    locations you have found.
    • Select
    > Search Select Area to narrow your search
    area.
    3 Select a location.
    4 Select Ride.
    5 Follow the on-screen instructions to your destination.

    Navigating to Known Coordinates
    1 Select Where To? > Search Tools > Coordinates.
    2 Enter the coordinates, and select .
    3 Follow the on-screen instructions to your destination.
    Navigating Back to Start
    At any point during your ride, you can return to the starting point.

    1 Go for a ride (Going for a Ride, page 2).
    2 During your ride, select anywhere on the screen to view the
    timer overlay.

    3 Select > Where To? > Back to Start.
    4 Select Along Same Route or Most Direct Route.
    5 Select Ride.
    The device navigates you back to the starting point of your
    ride.

    Stopping Navigation
    1 Select anywhere on the screen to view the timer overlay.
    2 Scroll to the map.
    3 Select > .
    Projecting a Location
    You can create a new location by projecting the distance and
    bearing from a marked location to a new location.
    1 Select Where To? > Saved Locations.
    2 Select a location.
    3 Select the location information at the top of the screen.
    4 Select > Project Location.
    5 Enter the bearing and distance to the projected location.
    6 Select .

    Editing Locations
    1 Select Where To? > Saved Locations.
    2 Select a location.
    3 Select the information bar at the top of the screen.
    4 Select .
    5 Select an attribute.
    For example, select Change Elevation to enter a known
    altitude for the location.
    6 Enter the new information, and select .

    Deleting a Location
    1 Select Where To? > Saved Locations.
    2 Select a location.
    3 Select the location information at the top of the screen.
    4 Select > Delete Location > .

    Courses
    You can send a course from your Garmin Connect account to
    your device. After it is saved to your device, you can navigate
    Navigation

    3



  • Page 8

    the course on your device. You can also create and save a
    custom course directly on your device.
    You can follow a saved course simply because it is a good
    route. For example, you can save and follow a bike-friendly
    commute to work.

    Following a Course From the Web
    Before you can download a course from Garmin Connect, you
    must have a Garmin Connect account (Garmin Connect,
    page 8).
    1 Connect the device to your computer using the USB cable.
    2 Go to www.garminconnect.com.
    3 Create a new course, or select an existing course.
    4 Select Send to Device.
    5 Disconnect the device, and turn it on.
    6 Select Courses > Saved Courses.
    7 Select the course.
    8 Select Ride.

    Planning and Riding a Course
    You can create and ride a custom course. A course is a
    sequence of waypoints or locations that leads you to your final
    destination.
    1 Select Courses > Course Creator > Add First Location.
    2 Select an option:
    • To select your current location on the map, select Current
    Location.
    • To select a saved location, select Saved, and select a
    location.
    • To select a location for which you recently searched,
    select Recent Finds, and select a location.
    • To select a location on the map, select Use Map, and
    select a location.
    • To browse for and select a point of interest, select POI
    Categories, and select a nearby point of interest.
    • To select a city, select Cities, and select a nearby city.
    • To select an address, select Addresses, and enter the
    address.
    • To select an intersection, select Intersections, and enter
    the street names.
    • To use coordinates, select Coordinates, and enter the
    coordinates.
    3 Select Use.
    4 Select Add Next Location.
    5 Repeat steps 2 through 4 until you have selected all locations
    for the route.
    6 Select View Map.
    The device calculates your route, and a map of the route
    appears.
    TIP: You can select
    to view an elevation plot of the route.
    7 Select Ride.

    Creating and Riding a Round-Trip Course
    The device can create a round-trip course based on a specified
    distance, starting location, and direction of navigation.
    1 Select Courses > Round-Trip Course.
    2 Select Distance, and enter the total distance for the course.
    3 Select Start Location.
    4 Select an option:
    • To select your current location on the map, select Current
    Location.

    4

    5
    6
    7
    8

    • To select a saved location, select Saved, and select a
    location.
    • To select a location for which you recently searched,
    select Recent Finds, and select a location.
    • To select a location on the map, select Use Map, and
    select a location.
    • To browse for and select a point of interest, select POI
    Categories, and select a nearby point of interest.
    • To select a city, select Cities, and select a nearby city.
    • To select an address, select Addresses, and enter the
    address.
    • To select an intersection, select Intersections, and enter
    the street names.
    • To use coordinates, select Coordinates, and enter the
    coordinates.
    Select Start Direction, and select a direction heading.
    Select Search.
    TIP: You can select to search again.
    Select a course to view it on the map.
    TIP: You can select and to view the other courses.
    Select Ride.

    Tips for Training with Courses
    • Use turn guidance (Course Options, page 5).
    • If you include a warmup, select
    to begin the course, and
    warm up as normal.
    • Stay away from your course path as you warm up.
    When you are ready to begin, head toward your course.
    When you are on any part of the course path, a message
    appears.
    • Scroll to the map to view the course map.
    If you stray from the course, a message appears.

    Viewing Course Details
    1 Select Courses > Saved Courses.
    2 Select a course.
    3 Select an option:





    Select Summary to view details about the course.
    Select Map to view the course on the map.
    Select Elevation to view an elevation plot of the course.
    Select Laps to select a lap and view additional information
    about each lap.

    Displaying a Course on the Map
    For each course saved to your device, you can customize how it
    appears on the map. For example, you can set your commute
    course to always display on the map in yellow. You can have an
    alternate course display in green. This allows you to see the
    courses while you are riding, but not follow or navigate a
    particular course.
    1 Select Courses > Saved Courses.
    2 Select the course.
    3 Select Settings.
    4 Select Always Display to make the course appear on the
    map.
    5 Select Color, and select a color.
    6 Select Course Points to include course points on the map.
    The next time you ride near the course, it appears on the map.

    Stopping a Course
    1 Scroll to the map.
    2 Select > .
    Navigation



  • Page 9

    Deleting a Course
    1 Select Courses > Saved Courses.
    2 Select a course.
    3 Select > .
    Course Options
    Select Courses > Saved Courses > .
    Turn Guidance: Enables or disables turn prompts.
    Off Crs. Warnings: Alerts you if you stray from the course.
    Search: Allows you to search for saved courses by name.
    Delete: Allows you to delete all or multiple saved courses from
    the device.

    Route Settings
    Select
    > Settings > Activity Settings > Navigation >
    Routing.
    Routing Mode: Sets the transportation method to optimize your
    route.
    Calculation Method: Sets the method used to calculate your
    route.
    Lock on Road: Locks the position icon, which represents your
    position on the map, onto the nearest road.
    Recalculation: Automatically recalculates the route when you
    deviate from the route.
    Avoidance Setup: Sets the road types to avoid while
    navigating.

    Selecting an Activity for Route Calculation
    You can set the device to calculate the route based on activity
    type.
    > Settings > Activity Settings.
    1 Select
    2 Select Navigation > Routing > Routing Mode.
    3 Select an option to calculate your route.
    For example, you can select Tour Cycling for on-road
    navigation or Mountain Biking for off-road navigation.

    you to install Garmin Connect mobile on your smartphone. Go to
    www.garmin.com/intosports/apps for more information.
    NOTE: Your device must be connected to your Bluetooth
    enabled smartphone to take advantage of some features.
    LiveTrack: Allows friends and family to follow your races and
    training activities in real time. You can invite followers using
    email or social media, allowing them to view your live data on
    a Garmin Connect tracking page.
    GroupTrack: Allows you to keep track of other riders in your
    group using LiveTrack directly on screen and in real time.
    Activity uploads to Garmin Connect: Automatically sends
    your activity to Garmin Connect as soon as you finish
    recording the activity.
    Course downloads from Garmin Connect: Allows you to
    search for courses on Garmin Connect using your
    smartphone and send them to your device.
    Device to device transfers: Allows you to wirelessly transfer
    files to another compatible Edge device.
    Social media interactions: Allows you to post an update to
    your favorite social media website when you upload an
    activity to Garmin Connect.
    Weather updates: Sends real-time weather conditions and
    alerts to your device.
    Notifications: Displays phone notifications and messages on
    your device.
    Audio prompts: Allows the Garmin Connect Mobile app to play
    status announcements on your smartphone during a ride.
    Incident detection: Allows the Garmin Connect Mobile app to
    send a message to your emergency contacts when the Edge
    device detects an incident.

    Pairing Your Smartphone
    1 Go to www.garmin.com/intosports/apps, and download the
    2
    3

    Map Settings
    Select
    > Settings > Activity Settings > Navigation > Map.
    Orientation: Sets how the map is shown on the page.
    Auto Zoom: Automatically selects a zoom level for the map.
    When Off is selected, you must zoom in or out manually.
    Map Detail: Sets the level of detail on the map. More detail may
    cause the map to draw slower.
    Guide Text: Sets when the turn-by-turn navigation prompts are
    shown (requires routable maps).
    Map Visibility: Allows you to set advanced map features.
    Map Information: Enables or disables the maps currently
    loaded on the device.

    Changing the Map Orientation
    > Settings > Activity Settings.
    1 Select
    2 Select Navigation > Map > Orientation.
    3 Select an option:
    • Select North Up to show north at the top of the page.
    • Select Track Up to show your current direction of travel at
    the top of the page.
    • Select 3D Mode to display the map in three dimensions.

    Bluetooth Connected Features
    ®

    The Edge device has Bluetooth connected features for your
    compatible smartphone or fitness device. Some features require

    Bluetooth Connected Features
    ®

    4
    5

    6

    Garmin Connect Mobile app to your smartphone.
    Bring your smartphone within 10 m (33 ft.) of your device.
    From your device, select
    > Settings > Bluetooth >
    Enable > Pair Smartphone, and follow the on-screen
    instructions.
    Open the Garmin Connect Mobile app.
    Select an option to add your device to your Garmin Connect
    account:
    • If this is the first device you have paired with the Garmin
    Connect Mobile app, follow the on-screen instructions.
    • If you have already paired another device with the Garmin
    Connect Mobile app, from the settings menu, select
    Garmin Devices > in the Garmin Connect Mobile app,
    and follow the on-screen instructions.
    Follow the on-screen instructions to enable phone
    notifications (optional).
    NOTE: Phone notifications require a compatible smartphone
    equipped with Bluetooth Smart wireless technology. Go to
    www.garmin.com/ble for compatibility information.

    Starting a GroupTrack Session
    Before you can start a GroupTrack session, you must have a
    Garmin Connect account, a compatible smartphone, and the
    Garmin Connect Mobile app.
    These instructions are for starting a GroupTrack session with
    Edge 820 devices. If riders in your group have other Edge
    models, you can see them on the map. The other Edge models
    cannot display GroupTrack riders on the map.
    1 Go outside, and turn on the Edge device.
    2 Pair your smartphone with the Edge device (Pairing Your
    Smartphone, page 5).
    5



  • Page 10

    3 On the Edge device, select
    4
    5
    6
    7
    8

    > Settings > GroupTrack to
    enable viewing connections on the map screen.
    In the Garmin Connect Mobile app, from the settings menu,
    select LiveTrack > GroupTrack.
    Select Visible to > All Connections.
    NOTE: If you have more than one compatible device, you
    must select a device for the GroupTrack session.
    Select Start LiveTrack.
    On the Edge device, select , and go for a ride.
    Scroll to the map to view your connections.

    Playing Audio Alerts During Your Activity
    Before you can set up audio alerts, you must have a
    smartphone with the Garmin Connect Mobile app paired to your
    Edge device.
    You can set the Garmin Connect Mobile app to play motivational
    status announcements on your smartphone during a run or other
    activity. Audio alerts include the lap number and lap time, pace
    or speed, and ANT+ sensor data. During an audio alert, the
    Garmin Connect mobile app mutes the primary audio of the
    smartphone to play the announcement. You can customize the
    volume levels on the Garmin Connect Mobile app.
    1 From the settings in the Garmin Connect Mobile app, select
    Garmin Devices.
    2 Select your device.
    3 If necessary, select Device Settings.
    4 Select Audio Alerts.

    Incident Detection

    You can tap an icon on the map to view location and heading
    information for other riders in the GroupTrack session.
    9 Scroll to the GroupTrack list.
    You can select a rider from the list, and that rider appears
    centered on the map.

    Tips for GroupTrack Sessions
    The GroupTrack feature allows you to keep track of other riders
    in your group using LiveTrack directly on the screen. All riders in
    the group must be your connections in your Garmin Connect
    account.
    • Pair your Edge device with your smartphone using Bluetooth
    technology.
    • In the Garmin Connect Mobile app, from the settings menu,
    select Connections to update the list of riders for your
    GroupTrack session.
    • Make sure all of your connections pair to their smartphones
    and start a LiveTrack session in the Garmin Connect Mobile
    app.
    • Make sure all your connections are in range (16 km or
    10 mi.).
    • During a GroupTrack session, scroll to the map to view your
    connections.
    • Stop riding before you attempt to view location and heading
    information for other riders in the GroupTrack session.

    Transferring Files to Another Edge Device
    You can transfer files wirelessly from one compatible Edge
    device to another using Bluetooth technology.
    1 Turn on both Edge devices, and bring them within range
    (3 m) of each other.
    > Device
    2 From the device that contains the files, select
    Transfers > Share Files > .
    3 Select one or more files to transfer, and select .
    > Device
    4 From the device that receives the files, select
    Transfers.
    5 Select a nearby connection.
    6 Select one or more files to receive, and select .
    A message appears on both devices after the file transfer is
    complete.

    6

    CAUTION
    Incident detection is a supplemental feature primarily designed
    for road use. Incident detection should not be relied on as a
    primary method to obtain emergency assistance. The Garmin
    Connect Mobile app does not contact emergency services on
    your behalf.
    When an incident is detected by your Edge device with GPS
    enabled, the Garmin Connect Mobile app can send an
    automated text message and email with your name and GPS
    location to your emergency contacts.
    A message appears on your device and paired smartphone
    indicating your contacts will be informed after 30 seconds have
    elapsed. If assistance is not needed, you can cancel the
    automated emergency message.
    Before you can enable incident detection on your device, you
    must set up emergency contact information in the Garmin
    Connect Mobile app. Your paired smartphone must be equipped
    with a data plan and be in an area of network coverage where
    data is available. Your emergency contacts must be able to
    receive text messages (standard text messaging rates may
    apply).

    Setting Up Incident Detection
    1 Go to www.garmin.com/intosports/apps, and download the
    Garmin Connect Mobile app to your smartphone.

    2 Pair your smartphone with your device (Pairing Your
    Smartphone, page 5).

    3 Set up your emergency contacts and rider information in the
    Garmin Connect Mobile app (Setting Up Rider Information
    and Emergency Contacts, page 6).
    4 Enable incident detection on your device (Turning Incident
    Detection On and Off, page 6).
    5 Enable GPS on your device (Changing the Satellite Setting,
    page 10).

    Setting Up Rider Information and Emergency
    Contacts
    1 Open the Garmin Connect Mobile app on your smartphone.
    2 From the app settings, select Incident Detection.
    3 Enter your rider information and your emergency contacts.
    Your selected contacts receive a message identifying them
    as emergency contacts for incident detection.

    Turning Incident Detection On and Off
    Select

    > Settings > System > Incident Detection.

    Bluetooth Connected Features
    ®



  • Page 11

    Viewing Your Emergency Contacts
    Before you can view your emergency contacts on your device,
    you must set up your rider information and emergency contacts
    in the Garmin Connect Mobile app.
    Select
    > Contacts.
    Your emergency contacts' names and phone numbers
    appear.

    Cancelling an Automated Message
    When an incident is detected by your device, you can cancel the
    automated emergency message on your device or your paired
    smartphone before it is sent to your emergency contacts.
    Select Cancel >
    before the end of the 30-second
    countdown.

    Sending a Status Update After an Incident
    Before you can send a status update to your emergency
    contacts, your device must detect an incident and send an
    automated emergency message to your emergency contacts.
    You can send a status update to your emergency contacts
    informing them you are not in need of assistance.
    1 Swipe down from the top of the screen to view the
    connections screen.
    2 Select Incident Detected > Send I'm Okay.
    A message is sent to all emergency contacts.

    ANT+ Sensors
    Your device can be used with wireless ANT+ sensors. For more
    information about compatibility and purchasing optional sensors,
    go to http://buy.garmin.com.

    Pairing Your ANT+ Sensors
    Before you can pair, you must put on the heart rate monitor or
    install the sensor.
    Pairing is the connecting of ANT+ wireless sensors, for example,
    connecting a heart rate monitor with your Garmin device.
    1 Bring the device within 3 m (10 ft.) of the sensor.
    NOTE: Stay 10 m (33 ft.) away from other riders' ANT+
    sensors while pairing.
    > Settings > Sensors > Add Sensor.
    2 Select
    3 Select an option:
    • Select a sensor type.
    • Select Search All to search for all nearby sensors.
    A list of available sensors appears.
    4 Select one or more sensors to pair with your device.
    5 Select Add.
    When the sensor is paired with your device, the sensor status
    is Connected. You can customize a data field to display
    sensor data.

    Setting Your Heart Rate Zones
    The device uses your user profile information from the initial
    setup to determine your heart rate zones. You can manually
    adjust the heart rate zones according to your fitness goals
    (Fitness Goals, page 7). For the most accurate calorie data
    during your activity, you should set your maximum heart rate,
    resting heart rate, and heart rate zones.
    > My Stats > Training Zones > Heart Rate
    1 Select
    Zones.
    2 Enter your maximum and resting heart rate values.
    The zone values update automatically, but you can also edit
    each value manually.
    3 Select Based On:.
    ANT+ Sensors

    4 Select an option:
    • Select BPM to view and edit the zones in beats per
    minute.
    • Select % Max. to view and edit the zones as a percentage
    of your maximum heart rate.
    • Select % HRR to view and edit the zones as a percentage
    of your resting heart rate.
    About Heart Rate Zones
    Many athletes use heart rate zones to measure and increase
    their cardiovascular strength and improve their level of fitness. A
    heart rate zone is a set range of heartbeats per minute. The five
    commonly accepted heart rate zones are numbered from 1 to 5
    according to increasing intensity. Generally, heart rate zones are
    calculated based on percentages of your maximum heart rate.
    Fitness Goals
    Knowing your heart rate zones can help you measure and
    improve your fitness by understanding and applying these
    principles.
    • Your heart rate is a good measure of exercise intensity.
    • Training in certain heart rate zones can help you improve
    cardiovascular capacity and strength.
    • Knowing your heart rate zones can prevent you from
    overtraining and can decrease your risk of injury.
    If you know your maximum heart rate, you can use the table
    (Heart Rate Zone Calculations, page 13) to determine the best
    heart rate zone for your fitness objectives.
    If you do not know your maximum heart rate, use one of the
    calculators available on the Internet. Some gyms and health
    centers can provide a test that measures maximum heart rate.
    The default maximum heart rate is 220 minus your age.

    Situational Awareness
    Your Edge device can be used with the Varia Vision™ device,
    Varia™ smart bike lights, and rearview radar to improve
    situational awareness. See the owner's manual for your Varia
    device for more information.
    NOTE: You may need to update the Edge software before
    pairing Varia devices (Updating the Software, page 12).

    History
    History includes time, distance, calories, speed, lap data,
    elevation, and optional ANT+ sensor information.
    NOTE: History is not recorded while the timer is stopped or
    paused.
    When the device memory is full, a message appears. The
    device does not automatically delete or overwrite your history.
    Upload your history to Garmin Connect periodically to keep track
    of all your ride data.

    Viewing Your Ride
    > History > Rides.
    1 Select
    2 Select a ride.
    3 Select an option.

    Viewing Data Totals
    You can view the accumulated data you have saved to the
    device, including the number of rides, time, distance, and
    calories.
    Select
    > History > Totals.

    Viewing Your Time in Each Heart Rate Zone
    Before you can view your time in each training zone, you must
    pair your device with a compatible heart rate monitor, complete
    an activity, and save the activity.
    7



  • Page 12

    Viewing your time in each heart rate zone can help you adjust
    your training intensity. You can adjust your heart rate zones
    (Setting Your Heart Rate Zones, page 7) to match your goals
    and abilities. You can customize a data field to display your time
    in training zones during your ride (Customizing the Data
    Screens, page 9).
    > History > Rides.
    1 Select
    2 Select a ride.
    3 Select Time in HR Zone.

    Deleting a Ride
    1
    2
    3
    4

    To sign up for a free account, go to www.garminconnect.com
    /start.
    Store your activities: After you complete and save an activity
    with your device, you can upload that activity to Garmin
    Connect and keep it as long as you want.
    Analyze your data: You can view more detailed information
    about your activity, including time, distance, elevation, heart
    rate, calories burned, cadence, an overhead map view, pace
    and speed charts, and customizable reports.
    NOTE: Some data requires an optional accessory such as a
    heart rate monitor.

    Select
    > History > Rides.
    Select > Delete.
    Select a ride.
    Select .

    Personal Records
    When you complete a ride, the device displays any new
    personal records you achieved during that ride. Personal
    records include your fastest time over a standard distance,
    longest ride, and most ascent gained during a ride.

    Viewing Your Personal Records
    Select

    > My Stats > Personal Records.

    Reverting a Personal Record
    You can set each personal record back to the one previously
    recorded.
    > My Stats > Personal Records.
    1 Select
    2 Select a record to revert.
    3 Select Previous Record > .
    NOTE: This does not delete any saved activities.

    Deleting a Personal Record
    > My Stats > Personal Records.
    1 Select
    2 Select a personal record.
    3 Select > .

    Sending Your Ride to Garmin Connect
    NOTICE
    To prevent corrosion, thoroughly dry the USB port, the weather
    cap, and the surrounding area before charging or connecting to
    a computer.
    1 Pull up the weather cap À from the USB port Á.

    2 Plug the small end of the USB cable into the USB port on the

    device.
    Plug
    the large end of the USB cable into a computer USB
    3
    port.
    4 Go to www.garminconnect.com/start.
    5 Follow the on-screen instructions.

    Garmin Connect
    You can connect with your friends on Garmin Connect. Garmin
    Connect gives you the tools to track, analyze, share, and
    encourage each other. Record the events of your active lifestyle
    including runs, walks, rides, swims, hikes, triathlons, and more.
    8

    Share your activities: You can connect with friends to follow
    each other's activities or post links to your activities on your
    favorite social networking sites.

    Data Management
    NOTE: The device is not compatible with Windows 95, 98, Me,
    Windows NT , and Mac OS 10.3 and earlier.
    ®

    ®

    ®

    Connecting the Device to Your Computer
    NOTICE
    To prevent corrosion, thoroughly dry the USB port, the weather
    cap, and the surrounding area before charging or connecting to
    a computer.
    1 Pull up the weather cap from the mini-USB port.
    2 Plug the small end of the USB cable into the mini-USB port.
    3 Plug the large end of the USB cable into a computer USB
    port.
    Your device appears as a removable drive in My Computer
    on Windows computers and as a mounted volume on Mac
    computers.

    Transferring Files to Your Device
    1 Connect the device to your computer.

    2
    3
    4
    5
    6
    7

    On Windows computers, the device appears as a removable
    drive or a portable device. On Mac computers, the device
    appears as a mounted volume.
    NOTE: Some computers with multiple network drives may not
    display device drives properly. See your operating system
    documentation to learn how to map the drive.
    On your computer, open the file browser.
    Select a file.
    Select Edit > Copy.
    Open the portable device, drive, or volume for the device.
    Browse to a folder.
    Select Edit > Paste.
    The file appears in the list of files in the device memory.

    Deleting Files
    NOTICE
    If you do not know the purpose of a file, do not delete it. Your
    device memory contains important system files that should not
    be deleted.
    History



  • Page 13

    1
    2
    3
    4

    Open the Garmin drive or volume.
    If necessary, open a folder or volume.
    Select a file.
    Press the Delete key on your keyboard.

    Disconnecting the USB Cable
    If your device is connected to your computer as a removable
    drive or volume, you must safely disconnect your device from
    your computer to avoid data loss. If your device is connected to
    your Windows computer as a portable device, it is not necessary
    to safely disconnect.
    1 Complete an action:
    • For Windows computers, select the Safely Remove
    Hardware icon in the system tray, and select your device.
    • For Mac computers, drag the volume icon to the trash.
    2 Disconnect the cable from your computer.

    Customizing Your Device
    Connect IQ Downloadable Features
    You can add Connect IQ features to your device from Garmin
    and other providers using the Garmin Connect Mobile app. You
    can customize your device with data fields, widgets, and apps.
    Data Fields: Allow you to download new data fields that present
    sensor, activity, and history data in new ways. You can add
    Connect IQ data fields to built-in features and pages.
    Widgets: Provide information at a glance, including sensor data
    and notifications.
    Apps: Add interactive features to your device, such as new
    outdoor and fitness activity types.

    Setting Up Your User Profile
    You can update your gender, age, weight, height, and lifetime
    athlete settings. The device uses this information to calculate
    accurate ride data.
    > My Stats > User Profile.
    1 Select
    2 Select an option.

    About Lifetime Athletes
    A lifetime athlete is an individual who has trained intensely for
    many years (with the exception of minor injuries) and has a
    resting heart rate of 60 beats per minute (bpm) or less.

    Updating Your Activity Settings
    > Settings > Activity Settings.
    1 Select
    2 Select an option:
    • Select Data Screens to customize the data screens and
    data fields (Customizing the Data Screens, page 9).
    • Select Default Ride Type to set the type of ride that is
    typical for you, such as commuting.
    TIP: After a ride that is not typical, you can manually
    update the ride type. Accurate ride type data is important
    for creating bike friendly courses.
    • Select Navigation to customize the map settings (Map
    Settings, page 5) and routing settings (Route Settings,
    page 5).
    • Select Alerts to customize your training alerts (Alerts,
    page 9).
    • Select Auto Features > Auto Lap to set how laps are
    triggered (Marking Laps by Position, page 9).
    • Select Auto Features > Auto Pause to change when the
    timer automatically pauses (Using Auto Pause,
    page 10).
    Customizing Your Device

    • Select Auto Features > Auto Sleep to automatically enter
    sleep mode after five minutes of inactivity (Using Auto
    Sleep, page 10).
    • Select Auto Features > Auto Scroll to customize the
    display of the training data pages when the timer is
    running (Using Auto Scroll, page 10).
    • Select Timer Start Mode to customize how the device
    detects the start of a ride and automatically starts the
    timer (Starting the Timer Automatically, page 10).
    All changes are saved to the activity settings.

    Customizing the Data Screens
    > Settings > Activity Settings.
    1 Select
    2 Select Data Screens.
    3 Select a data screen.
    4 If necessary, enable the data screen.
    5 Select the number of data fields to appear on the screen.
    6 Select .
    7 Select a data field to change it.
    8 Select .
    Alerts
    You can use alerts to train toward specific time, distance,
    calorie, heart rate, and cadence goals.
    Setting Range Alerts
    If you have an optional heart rate monitor or cadence sensor,
    you can set up range alerts. A range alert notifies you when the
    device measurement is above or below a specified range of
    values. For example, you can set the device to alert you when
    your heart rate is below 90 BPM and over 160 BPM (Setting
    Your Heart Rate Zones, page 7).
    > Settings > Activity Settings > Alerts.
    1 Select
    2 Select Heart Rate Alert or Cadence Alert.
    3 If necessary, turn on the alert.
    4 Select the minimum and maximum values, or select zones.
    5 If necessary, select .
    Each time you exceed or drop below the specified range, a
    message appears. The device also beeps if audible tones are
    turned on (Turning the Device Tones On and Off, page 11).
    Setting a Recurring Alert
    A recurring alert notifies you each time the device records a
    specified value or interval. For example, you can set the device
    to alert you every 30 minutes.
    > Settings > Activity Settings.
    1 Select
    2 Select Alerts.
    3 Select Time Alert, Distance Alert, or Calorie Alert.
    4 Turn on the alert.
    5 Enter a value.
    6 Select .
    Each time you reach the alert value, a message appears. The
    device also beeps if audible tones are turned on (Turning the
    Device Tones On and Off, page 11).

    Auto Lap

    ®

    Marking Laps by Position
    You can use the Auto Lap feature to mark the lap at a specific
    position automatically. This feature is helpful for comparing your
    performance over different parts of a ride (for example, a long
    climb or training sprints). During courses, you can use the By
    Position option to trigger laps at all of the lap positions saved in
    the course.
    > Settings > Activity Settings.
    1 Select

    9



  • Page 14

    2 Select Auto Features > Auto Lap > Auto Lap Trigger > By

    Position > Lap At.
    3 Select an option:
    • Select Lap Press Only to trigger the lap counter each
    time you select
    and each time you pass any of those
    locations again.
    • Select Start and Lap to trigger the lap counter at the GPS
    location where you select
    and at any location during
    the ride where you select
    .
    • Select Mark and Lap to trigger the lap counter at a
    specific GPS location marked before the ride and at any
    location during the ride where you select
    .
    4 If necessary, customize the lap data fields (Customizing the
    Data Screens, page 9).
    Marking Laps by Distance
    You can use the Auto Lap feature to mark the lap at a specific
    distance automatically. This feature is helpful for comparing your
    performance over different parts of a ride (for example, every 10
    miles or 40 kilometers).
    > Settings > Activity Settings.
    1 Select
    2 Select Auto Features > Auto Lap > Auto Lap Trigger > By
    Distance > Lap At.
    Enter
    a value.
    3
    4 If necessary, customize the lap data fields (Customizing the
    Data Screens, page 9).

    Using Auto Pause
    You can use the Auto Pause feature to pause the timer
    automatically when you stop moving or when your speed drops
    below a specified value. This feature is helpful if your ride
    includes stop lights or other places where you need to slow
    down or stop.
    NOTE: History is not recorded while the timer is stopped or
    paused.
    > Settings > Activity Settings.
    1 Select
    2 Select Auto Features > Auto Pause.
    3 Select an option:
    • Select When Stopped to pause the timer automatically
    when you stop moving.
    • Select Custom Speed to pause the timer automatically
    when your speed drops below a specified value.
    4 If necessary, customize optional time data fields
    (Customizing the Data Screens, page 9).
    ®

    Using Auto Sleep
    You can use the Auto Sleep feature to automatically enter sleep
    mode after 5 minutes of inactivity. During sleep mode, the
    screen is turned off and the ANT+ sensors, Bluetooth, and GPS
    are disconnected.
    > Settings > Activity Settings.
    1 Select
    2 Select Auto Features > Auto Sleep.

    2 Select Timer Start Mode.
    3 Select an option:
    • Select Manual, and select
    to start the timer.
    • Select Prompted to display a visual reminder when you
    reach the start notice speed.
    • Select Auto to start the timer automatically when you
    reach the start notice speed.

    Bluetooth Settings
    Select
    > Settings > Bluetooth.
    Enable: Enables Bluetooth wireless technology.
    NOTE: Other Bluetooth settings appear only when Bluetooth
    wireless technology is enabled.
    Friendly Name: Allows you to enter a friendly name that
    identifies your devices with Bluetooth wireless technology.
    Pair Smartphone: Connects your device with a compatible
    Bluetooth enabled smartphone. This setting allows you to use
    Bluetooth connected features, including LiveTrack and
    activity uploads to Garmin Connect.
    Call and Text Alerts: Allows you to enable phone notifications
    from your compatible smartphone.
    Missed Calls and Texts: Displays missed phone notifications
    from your compatible smartphone.

    System Settings
    Select
    > Settings > System.
    • Display Settings (Display Settings, page 10)
    • Data Recording Settings (Data Recording Settings,
    page 10)
    • Unit Settings (Changing the Units of Measure, page 11)
    • Tone Settings (Turning the Device Tones On and Off,
    page 11)
    • Language Settings (Changing the Device Language,
    page 11)

    Changing the Satellite Setting
    For increased performance in challenging environments and
    faster GPS position location, you can enable GPS+GLONASS.
    Using the GPS+GLONASS setting reduces battery life more
    quickly than using only GPS.
    > Settings > System > GPS Mode.
    1 Select
    2 Select an option.

    Changing the Accent Color
    You can change the accent color on the device.
    > Settings > System > Color.
    1 Select
    Select
    an
    accent
    color.
    2

    Display Settings

    You can use the Auto Scroll feature to automatically cycle
    through all of the training data screens while the timer is
    running.
    > Settings > Activity Settings.
    1 Select
    2 Select Auto Features > Auto Scroll.
    3 Select a display speed.

    Select
    > Settings > System > Display.
    Brightness: Sets the backlight brightness.
    Backlight Timeout: Sets the length of time before the backlight
    turns off.
    Color Mode: Sets the device to display day or night colors. You
    can select the Auto option to allow the device to set day or
    night colors automatically based on the time of day.
    Screen Capture: Allows you to save the image of the device
    screen.

    Starting the Timer Automatically

    Data Recording Settings

    Using Auto Scroll

    This feature automatically detects when your device has
    acquired satellites and is moving. It starts the timer or reminds
    you to start the timer so you can record your ride data.
    > Settings > Activity Settings.
    1 Select
    10

    Select
    > Settings > System > Data Recording.
    Recording Interval: Controls how the device records activity
    data. The Smart option records key points where you change
    direction, speed, or heart rate. The 1 Sec option records
    Customizing Your Device



  • Page 15

    points every second. It creates a very detailed record of your
    activity and increases the size of the stored activity file.
    Cadence Averaging: Controls whether the device includes zero
    values for cadence data that occur when you are not
    pedaling. The default setting excludes zero values that occur
    when you are not pedaling.

    Changing the Units of Measure
    You can customize units of measure for distance and speed,
    elevation, temperature, weight, position format, and time format.
    > Settings > System > Units.
    1 Select
    2 Select a measurement type.
    3 Select a unit of measure for the setting.

    Turning the Device Tones On and Off
    Select

    > Settings > System > Tones.

    Changing the Device Language
    Select

    > Settings > System > Language.

    Changing the Configuration Settings
    You can modify all of the settings you configured in the initial
    setup.
    > Settings > System > Device Reset > Initial
    1 Select
    Setup.
    2 Follow the on-screen instructions.

    Time Zones
    Each time you turn on the device and acquire satellites or sync
    with your smartphone, the device automatically detects your
    time zone and the current time of day.

    Device Information
    Edge Specifications
    Battery type

    Rechargeable, built-in lithium-ion battery

    Battery life

    12 hr., typical usage

    Operating temperature
    range

    From -20º to 60ºC (from -4º to 140ºF)

    Charging temperature
    range

    From 0º to 45ºC (from 32º to 113ºF)

    Radio frequency/
    protocol

    2.4 GHz ANT+ wireless communications
    protocol
    Bluetooth Smart wireless technology

    Water rating

    IEC 60529 IPX7*

    *The device withstands incidental exposure to water of up to 1 m
    for up to 30 min. For more information, go to www.garmin.com
    /waterrating.

    Device Care
    NOTICE
    Do not store the device where prolonged exposure to extreme
    temperatures can occur, because it can cause permanent
    damage.
    Never use a hard or sharp object to operate the touchscreen, or
    damage may result.
    Avoid chemical cleaners, solvents, and insect repellents that can
    damage plastic components and finishes.
    Secure the weather cap tightly to prevent damage to the USB
    port.

    Cleaning the Device
    1 Wipe the device using a cloth dampened with a mild
    detergent solution.

    After cleaning, allow the device to dry completely.

    Troubleshooting
    Resetting the Device
    If the device stops responding, you may need to reset it. This
    does not erase any of your data or settings.
    Hold for 10 seconds.
    The device resets and turns on.

    Clearing User Data
    You can restore all of the device settings to the factory default
    values.
    NOTE: This deletes all user-entered information, but it does not
    delete your history.
    Select
    > Settings > System > Device Reset > Factory
    Reset > .

    Maximizing Battery Life
    • Turn on Battery Save Mode (Turning On Battery Save
    Mode, page 11).
    • Decrease the backlight brightness (Using the Backlight,
    page 2) or shorten the backlight timeout (Display Settings,
    page 10).
    • Select the Smart recording interval (Data Recording Settings,
    page 10).
    • Turn on the Auto Sleep feature (Using Auto Sleep, page 10).
    • Turn off the Bluetooth wireless feature (Bluetooth Settings,
    page 10).
    • Select the GPS setting (Changing the Satellite Setting,
    page 10).

    Turning On Battery Save Mode
    Battery save mode adjusts the settings automatically to extend
    the battery life for longer rides. During an activity, the screen
    turns off. You can enable automatic alerts and tap the screen to
    wake it up. Battery save mode records GPS track points and
    sensor data less frequently. Speed, distance, and track data
    accuracy are reduced.
    NOTE: History is recorded in battery save mode when the timer
    is running.
    > Settings > Battery Save Mode > Enable.
    1 Select
    Select
    the
    alerts that wake up the screen during an activity.
    2

    Improving GPS Satellite Reception
    • Frequently sync the device to your Garmin Connect account:
    ◦ Connect your device to a computer using the USB cable
    and the Garmin Express™ application.
    ◦ Sync your device to the Garmin Connect Mobile app using
    your Bluetooth enabled smartphone.
    While connected to your Garmin Connect account, the device
    downloads several days of satellite data, allowing it to quickly
    locate satellite signals.
    • Take your device outside to an open area away from tall
    buildings and trees.
    • Remain stationary for a few minutes.

    Setting Your Elevation
    If you have accurate elevation data for your present location,
    you can manually calibrate the altimeter on your device.
    > Set Elevation.
    1 Select Where To? >
    2 Enter the elevation, and select .

    2 Wipe it dry.
    Device Information

    11



  • Page 16

    Temperature Readings
    The device may display temperature readings that are higher
    than the actual air temperature if the device is placed in direct
    sunlight, held in your hand, or is charging with an external
    battery pack. Also, the device will take some time to adjust to
    significant changes in temperature.

    Replacement O-rings
    Replacement bands (O-rings) are available for the mounts.
    NOTE: Use Ethylene Propylene Diene Monomer (EPDM)
    replacement bands only. Go to http://buy.garmin.com, or contact
    your Garmin dealer.

    Viewing Device Information
    > Settings > System > About.
    1 Select
    2 Select an option.
    • Select Regulatory Info to view the regulatory information
    and model number.
    • Select Copyright Info to view software information, the
    unit ID, and the license agreement.

    Updating the Software
    Before you can update your device software, you must have a
    Garmin Connect account, and you must download the Garmin
    Express application.
    1 Connect the device to your computer using the USB cable.
    When new software is available, Garmin Express sends it to
    your device.
    2 Follow the on-screen instructions.
    3 Do not disconnect your device from the computer during the
    update process.

    Support and Updates
    Garmin Express (www.garmin.com/express) provides easy
    access to these services for Garmin devices.
    • Product registration
    • Product manuals
    • Software updates
    • Data uploads to Garmin Connect
    • Map, chart, or course updates

    Getting More Information
    • Go to www.garmin.com/intosports.
    • Go to www.garmin.com/learningcenter.
    • Go to http://buy.garmin.com, or contact your Garmin dealer
    for information about optional accessories and replacement
    parts.

    Appendix
    Data Fields
    Some data fields require ANT+ accessories to display data.
    Battery Level: The remaining battery power.
    Battery Status: The remaining battery power of a bike light
    accessory.
    Beam Angle Status: The headlight beam mode.
    Cadence: Cycling. The number of revolutions of the crank arm.
    Your device must be connected to a cadence accessory for
    this data to appear.
    Cadence - Avg.: Cycling. The average cadence for the current
    activity.

    12

    Cadence - Lap: Cycling. The average cadence for the current
    lap.
    Calories: The amount of total calories burned.
    Course Pt. Dist.: The remaining distance to the next point on
    the course.
    Dist. - Lap: The distance traveled for the current lap.
    Dist. - Last Lap: The distance traveled for the last completed
    lap.
    Dist. to Dest.: The remaining distance to the final destination.
    You must be navigating for this data to appear.
    Dist. to Go: During a course, the remaining distance when you
    are using a distance target.
    Dist. to Next: The remaining distance to the next waypoint on
    the route. You must be navigating for this data to appear.
    Distance: The distance traveled for the current track or activity.
    Elevation: The altitude of your current location above or below
    sea level.
    ETA at Destination: The estimated time of day when you will
    reach the final destination (adjusted to the local time of the
    destination). You must be navigating for this data to appear.
    ETA at Next: The estimated time of day when you will reach the
    next waypoint on the route (adjusted to the local time of the
    waypoint). You must be navigating for this data to appear.
    GPS Accuracy: The margin of error for your exact location. For
    example, your GPS location is accurate to within +/- 3.65 m
    (12 ft.).
    GPS Signal Strength: The strength of the GPS satellite signal.
    Grade: The calculation of rise (elevation) over run (distance).
    For example, if for every 3 m (10 ft.) you climb you travel
    60 m (200 ft.), the grade is 5%.
    Heading: The direction you are moving.
    Heart Rate: Your heart rate in beats per minute (bpm). Your
    device must be connected to a compatible heart rate monitor.
    HR - %HRR: The percentage of heart rate reserve (maximum
    heart rate minus resting heart rate).
    HR - %Max.: The percentage of maximum heart rate.
    HR - Avg.: The average heart rate for the current activity.
    HR - Avg. %HRR: The average percentage of heart rate reserve
    (maximum heart rate minus resting heart rate) for the current
    activity.
    HR - Avg. %Max.: The average percentage of maximum heart
    rate for the current activity.
    HR Graph: A line graph showing your current heart rate zone (1
    to 5).
    HR - Lap: The average heart rate for the current lap.
    HR - Lap %HRR: The average percentage of heart rate reserve
    (maximum heart rate minus resting heart rate) for the current
    lap.
    HR - Lap %Max.: The average percentage of maximum heart
    rate for the current lap.
    HR - Last Lap: The average heart rate for the last completed
    lap.
    HR Zone: The current range of your heart rate (1 to 5). The
    default zones are based on your user profile and maximum
    heart rate (220 minus your age).
    Laps: The number of laps completed for the current activity.
    Light Mode: The light network configuration mode.
    Lights Connected: The number of connected lights.
    Location at Dest.: The last point on the route or course.
    Location at Next: The next point on the route or course.
    Odometer: A running tally of distance traveled for all trips. This
    total does not clear when resetting the trip data.
    Appendix



  • Page 17

    Speed: The current rate of travel.
    Speed - Avg.: The average speed for the current activity.
    Speed - Lap: The average speed for the current lap.
    Speed - Last Lap: The average speed for the last completed
    lap.
    Speed - Max.: The top speed for the current activity.
    Sunrise: The time of sunrise based on your GPS position.
    Sunset: The time of sunset based on your GPS position.
    Temperature: The temperature of the air. Your body
    temperature affects the temperature sensor.
    Time: The stopwatch time for the current activity.
    Time - Avg. Lap: The average lap time for the current activity.
    Time - Elapsed: The total time recorded. For example, if you
    start the timer and run for 10 minutes, then stop the timer for
    5 minutes, then start the timer and run for 20 minutes, your
    elapsed time is 35 minutes.
    Time in Zone: The time elapsed in each heart rate zone.
    Time - Lap: The stopwatch time for the current lap.
    Time - Last Lap: The stopwatch time for the last completed lap.
    Time of Day: The time of day based on your current location
    and time settings (format, time zone, daylight saving time).
    Time to Dest.: The estimated time remaining before you reach
    the destination. You must be navigating for this data to
    appear.
    Time to Go: During a course, the remaining time when you are
    using a time target.
    Time to Next: The estimated time remaining before you reach
    the next waypoint in the route. You must be navigating for
    this data to appear.
    Total Ascent: The total elevation distance ascended since the
    last reset.
    Total Descent: The total elevation distance descended since
    the last reset.
    Vertical Speed: The rate of ascent or descent over time.
    VS - 30s Avg.: The 30-second moving average of vertical
    speed.

    Wheel Size

    L (mm)

    12 × 1.75

    935

    14 × 1.5

    1020

    14 × 1.75

    1055

    16 × 1.5

    1185

    16 × 1.75

    1195

    18 × 1.5

    1340

    18 × 1.75

    1350

    20 × 1.75

    1515

    20 × 1-3/8

    1615

    22 × 1-3/8

    1770

    22 × 1-1/2

    1785

    24 × 1

    1753

    24 × 3/4 Tubular

    1785

    24 × 1-1/8

    1795

    24 × 1-1/4

    1905

    24 × 1.75

    1890

    24 × 2.00

    1925

    24 × 2.125

    1965

    26 × 7/8

    1920

    26 × 1(59)

    1913

    26 × 1(65)

    1952

    26 × 1.25

    1953

    26 × 1-1/8

    1970

    26 × 1-3/8

    2068

    26 × 1-1/2

    2100

    26 × 1.40

    2005

    26 × 1.50

    2010

    26 × 1.75

    2023

    26 × 1.95

    2050

    26 × 2.00

    2055

    26 × 2.10

    2068

    26 × 2.125

    2070

    26 × 2.35

    2083

    26 × 3.00

    2170

    Heart Rate Zone Calculations

    27 × 1

    2145

    27 × 1-1/8

    2155

    27 × 1-1/4

    2161

    27 × 1-3/8

    2169
    2090

    650 × 38A

    2125

    Zone % of
    Maximum
    Heart Rate

    Perceived Exertion

    1

    50–60%

    Relaxed, easy pace,
    rhythmic breathing

    Beginning-level
    aerobic training,
    reduces stress

    650 × 35A
    650 × 38B

    2105

    2

    60–70%

    Comfortable pace,
    slightly deeper
    breathing, conversation
    possible

    Basic cardiovascular
    training, good
    recovery pace

    700 × 18C

    2070

    700 × 19C

    2080

    700 × 20C

    2086

    Moderate pace, more
    difficult to hold
    conversation

    Improved aerobic
    capacity, optimal
    cardiovascular training

    700 × 23C

    2096

    700 × 25C

    2105

    700 × 28C

    2136

    700 × 30C

    2170

    700 × 32C

    2155

    700C Tubular

    2130

    700 × 35C

    2168

    700 × 38C

    2180

    700 × 40C

    2200

    3

    4

    5

    70–80%

    80–90%

    90–100%

    Benefits

    Fast pace and a bit
    Improved anaerobic
    uncomfortable, breathing capacity and
    forceful
    threshold, improved
    speed
    Sprinting pace,
    unsustainable for long
    period of time, labored
    breathing

    Anaerobic and
    muscular endurance,
    increased power

    Wheel Size and Circumference
    The wheel size is marked on both sides of the tire. This is not a
    comprehensive list. You can also use one of the calculators
    available on the Internet.
    Appendix

    Software License Agreement
    BY USING THE DEVICE, YOU AGREE TO BE BOUND BY THE
    TERMS AND CONDITIONS OF THE FOLLOWING SOFTWARE

    13



  • Page 18

    LICENSE AGREEMENT. PLEASE READ THIS AGREEMENT
    CAREFULLY.
    Garmin Ltd. and its subsidiaries (“Garmin”) grant you a limited
    license to use the software embedded in this device (the
    “Software”) in binary executable form in the normal operation of
    the product. Title, ownership rights, and intellectual property
    rights in and to the Software remain in Garmin and/or its thirdparty providers.
    You acknowledge that the Software is the property of Garmin
    and/or its third-party providers and is protected under the United
    States of America copyright laws and international copyright
    treaties. You further acknowledge that the structure,
    organization, and code of the Software, for which source code is
    not provided, are valuable trade secrets of Garmin and/or its
    third-party providers and that the Software in source code form
    remains a valuable trade secret of Garmin and/or its third-party
    providers. You agree not to decompile, disassemble, modify,
    reverse assemble, reverse engineer, or reduce to human
    readable form the Software or any part thereof or create any
    derivative works based on the Software. You agree not to export
    or re-export the Software to any country in violation of the export
    control laws of the United States of America or the export control
    laws of any other applicable country.

    Radio Frequency Exposure
    This device is a mobile transmitter and receiver that uses its
    antenna to send and receive low levels of radio frequency (RF)
    energy for voice and data communications. The device emits RF
    energy below the published limits when operating in its
    maximum output power mode and when used with Garmin
    authorized accessories. To comply with FCC RF exposure
    compliance requirements, the device should be used in a
    compatible mount or as mounted per the installation instructions
    only. The device should not be used in other configurations.
    This device must not be co-located or operated in conjunction
    with any other transmitter or antenna.

    14

    Appendix



  • Page 19

    Index
    A
    accessories 7, 12
    addresses, finding 3
    alerts 9
    altimeter, calibrating 11
    ANT+ sensors 2, 7
    pairing 7
    applications 5, 9
    Auto Lap 9, 10
    Auto Pause 10
    auto scroll 10
    auto sleep 10

    B
    back to start 3
    backlight 2, 10
    bands 12
    battery
    charging 1
    maximizing 11
    type 1
    Bluetooth technology 5, 6, 10

    C
    cadence, alerts 9
    calorie, alerts 9
    cleaning the device 11
    computer, connecting 8
    Connect IQ 9
    coordinates 3
    courses 3–5
    creating 4
    deleting 5
    editing 4
    loading 4
    customizing the device 9

    D
    data
    recording 10
    screens 9
    storing 8
    transferring 8
    data fields 9, 12
    deleting, all user data 8, 11
    device
    care 11
    resetting 11
    display settings 10
    distance, alerts 9

    E
    elevation 11
    emergency contacts 6, 7

    F
    files, transferring 8

    G
    Garmin Connect 4, 5, 8, 9
    Garmin Connect Mobile 6
    Garmin Express
    registering the device 12
    updating software 12
    GLONASS 10
    GPS 10
    signal 2, 3, 11
    GroupTrack 5, 6

    H
    heart rate
    alerts 9
    zones 7, 13
    history 2, 7
    deleting 8
    sending to computer 8

    I
    icons 2
    Index

    incident detection 6, 7
    initial setup 11
    installing 1

    K
    keys 2

    L
    language 11
    laps 2
    lifetime athlete 9
    LiveTrack 5, 6
    locations 3
    deleting 3
    editing 3
    finding with the map 3
    locking, screen 2

    M

    troubleshooting 11, 12

    U
    unit ID 12
    units of measure 11
    updates, software 12
    USB 12
    disconnecting 9
    user data, deleting 8
    user profile 9

    W
    watch faces 9
    waypoints, projecting 3
    wheel sizes 13
    widgets 9

    Z
    zones, time 11

    maps 3, 4
    finding locations 3
    orientation 5
    settings 5
    updating 12
    mounting the device 1

    N
    navigation 3
    back to start 3
    stopping 3

    O
    O-rings. See bands
    on-screen buttons 2

    P
    pairing 2, 5
    ANT+ sensors 7
    personal records 8
    deleting 8
    points of interest (POI), finding 3
    product registration 12
    profiles, user 9

    R
    registering the device 12
    resetting the device 11
    routes
    creating 4
    settings 5

    S
    satellite signals 2, 3, 11
    saving activities 2
    screen 10
    locking 2
    settings 9–11
    device 11
    sleep mode 10
    smartphone 2, 5, 9, 10
    apps 6
    software
    license 12
    updating 12
    version 12
    software license agreement 13
    specifications 11
    start notice message 10
    storing data 8
    system settings 10

    T
    temperature 12
    time, alerts 9
    time zones 11
    timer 2, 7
    tones 11
    touchscreen 2
    training
    pages 2
    screens 9
    transferring, files 6
    15



  • Page 20

    www.garmin.com/support
    1800 235 822

    +43 (0) 820 220230

    + 32 2 672 52 54

    0800 770 4960

    1-866-429-9296

    +385 1 5508 272
    +385 1 5508 271

    +420 221 985466
    +420 221 985465

    + 45 4810 5050

    + 358 9 6937 9758

    + 331 55 69 33 99

    + 39 02 36 699699

    (+52) 001-855-792-7671

    0800 427 652

    0800 0233937

    +47 815 69 555

    00800 4412 454
    +44 2380 662 915

    +35 1214 447 460

    +386 4 27 92 500

    0861 GARMIN (427 646)
    +27 (0)11 251 9800

    +34 93 275 44 97

    + 46 7744 52020

    +886 2 2642-9199 ext 2

    0808 238 0000
    +44 870 850 1242

    +49 (0) 89 858364880
    zum Ortstarif - Mobilfunk
    kann abweichen

    913-397-8200
    1-800-800-1020

    © 2016 Garmin Ltd. or its subsidiaries






Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Garmin Edge Explore 820 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Holen Sie sich Ihr Benutzerhandbuch per E-Mail

Geben Sie Ihre E-Mail-Adresse ein, um das Handbuch zu erhalten von Garmin Edge Explore 820 in der Sprache / Sprachen: Englisch als Anhang in Ihrer E-Mail.

Das Handbuch ist 2,83 mb groß.

 

Sie erhalten das Handbuch in Ihrer E-Mail innerhalb von Minuten. Wenn Sie keine E-Mail erhalten haben, haben Sie wahrscheinlich die falsche E-Mail-Adresse eingegeben oder Ihre Mailbox ist zu voll. Darüber hinaus kann es sein, dass Ihr ISP eine maximale Größe für E-Mails empfangen kann.

Andere Handbücher von Garmin Edge Explore 820

Garmin Edge Explore 820 Bedienungsanleitung - Deutsch - 22 seiten

Garmin Edge Explore 820 Bedienungsanleitung - Holländisch - 22 seiten

Garmin Edge Explore 820 Bedienungsanleitung - Französisch - 22 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info