Bedienungsanleitung Garmin Force Trolling Motor (Seite 12 von 16) (Englisch)

691441

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

Deleting a Saved Track

On the remote control, select > Tracks > Saved Tracks.

A list of the ten closest saved tracks is shown.

Select a saved track.

Select Delete.

Navigating

Before you can navigate, you must calibrate the trolling motor

(Calibrating the Trolling Motor, page 2).

The trolling motor uses GPS to steer the boat to a waypoint

location or to follow a route or a track.

On the remote control, select an option:

• Begin navigating to a saved waypoint (Navigating to a

Waypoint, page 6).

• Begin navigating a saved route (Navigating a Route,

page 7).

• Begin retracing the active track (Navigating to the Start of

the Active Track, page 7).

• Begin navigating a saved track (Navigating a Saved

Track, page 7).

NOTE: You can also use the trolling motor to follow

autoguidance paths when navigation is started from a

connected chartplotter. See your chartplotter owner's manual

for more information.

Navigating is shown on the remote control screen, and the

trolling motor automatically steers the boat to the destination.

Adjust the speed as needed.

Pausing and Resuming Navigation

While navigating, on the remote control, select an option:

• To pause navigation while continuing in the same direction

at the same speed, select > Standby.

• To pause navigation and set anchor lock, select

Navigation stops, and the trolling motor returns to manual

mode or maintains your position in anchor lock.

Select > Follow Route or press to resume navigation.

If necessary, start the propeller.

Stopping Navigation

Select > Stop Nav.

Navigation stops, and the trolling motor returns to manual

mode.

Settings

Trolling Motor Settings

On the remote control, select > Settings > Trolling Motor.

Wi-Fi: Sets the wireless network preferences for the trolling

motor (Wireless Network Settings, page 8).

Calibrate: Calibrates the trolling motor compass (Calibrating the

Trolling Motor, page 2) and sets the trolling motor bow offset

(Setting the Bow Offset, page 2).

Units: Sets the units of measure.

Prop Stow Side: Sets which side of the trolling motor the

propellor rotates to when stowing the trolling motor. This is

helpful when you store other items near the stowed propellor.

Auto Power On: Turns on the trolling motor when you apply

power to the system.

Heading Hold: Sets the behavior of the heading hold feature

(Changing the Heading Hold Behavior, page 6).

Anchor Gain: Sets the response of the trolling motor when in

anchor lock mode. If you need the trolling motor to be more

responsive and move quicker, increase the value. If the

motor is moving too much, decrease the value.

Navigation Gain: Sets the response of the trolling motor when

navigating. If you need the trolling motor to be more

responsive and move quicker, increase the value. If the

motor is moving too much, decrease the value.

Clear User Data: Deletes all saved waypoints, routes, tracks,

and you active track.

NOTE: If you are connected to a chartplotter, selecting this

clears user data from both the trolling motor and the

connected chartplotter.

Restore Defaults: Resets the trolling motor settings to the

factory default values.

Wireless Network Settings

On the remote control, select > Settings > Trolling Motor >

Wi-Fi.

NOTE: The active Wi‑Fi

mode is shown at the top of the

screen.

Mode: Sets the Wi‑Fi mode. You can turn off Wi‑Fi technology,

join the network of a chartplotter, or create a wireless access

point to use the ActiveCaptain

app (Getting Started with the

ActiveCaptain App, page 9).

Setup > Name: Sets the name of the wireless access point on

the trolling motor (ActiveCaptain mode only).

Setup > Password: Sets the password for the wireless access

point on the trolling motor (ActiveCaptain mode only).

Remote Control Settings

On the remote control, select > Settings > Remote Control.

Backlight: Adjusts the backlight settings. (Backlight Settings,

page 8)

Beeper: Sets the beeper to sound for key presses and alarms.

Power: Sets the length of time before the remote control turns

off automatically.

Calibrate: Calibrates the remote control for the gesture-control

features (Calibrating the Remote Control, page 4).

Pair: Pairs the remote control with the trolling motor (Pairing the

Remote Control, page 4).

Language: Sets the on-screen text language.

Restore Defaults: Resets the remote control to factory default

settings. This restores the default configuration settings on

the remote control, but does not remove saved user data.

Backlight Settings

On the remote control, select > Settings > Remote Control

> Backlight.

Keys: Sets the backlight to turn on when a key is pressed.

Alarms: Sets the backlight to turn on when an alarm sounds on

the remote control.

Timeout: Sets the length of time before the backlight turns off.

Brightness: Sets the brightness level of the backlight.

Maintenance Needs and Schedule

To maintain your warranty, you must perform a series of routine

maintenance tasks as you prepare your motor for the season. If

you use or transport the motor in dry, dusty environments

(traveling on gravel roads, for example) you should perform

these tasks more often during the season.

For detailed procedures and information on service and

replacement parts, download the Force Trolling Motor

Maintenance Manual from www.garmin.com/manuals/force

_trolling_motor .

8 Settings

Garmin Force Trolling Motor Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin Force Trolling Motor

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info