762331
20
Zoom out
Zoom in
Vorherige Seite
1/22
Nächste Seite
Potential Cause Potential Resolution
Check the wire gauge used to connect the speakers to the amplifier, and make sure it is
appropriate for the length of the wire run (Signal and Speaker Connection Considerations,
page 11).
Power issue Check the power cables to make sure they are the appropriate gauge, are fused, and are
connected properly (Connecting to Power, page 9).
LED is Green the Sound is not Optimal
Issue Potential Resolution
There is a hum or other
unexpected noise from
a speaker
Install ground-loop isolators inline with the RCA cables from the stereo.
NOTE: You should install ground-loop isolators on the RCA cables where they
connect to the stereo, not where they connect to the amplifier.
The sound is distorted
or clipping
Check the DSP settings in the Fusion-Link app and make sure the correct speakers,
stereo, and amplifier are selected.
NOTE: You must select the option in the app to send the DSP settings to the
devices after you configure the settings.
Bass response is
reduced or uneven
Check the DSP settings in the Fusion-Link app and make sure the correct speakers,
stereo, and amplifier are selected.
NOTE: You must select the option in the app to send the DSP settings to the
devices after you configure the settings.
LED is Orange
Potential Cause Potential Resolution
Power supply under- or
over-voltage issue
Check the input power to make sure it is within the 10.8 to 16 Vdc operational range
for the amplifier.
Power wire gauge issue Check the wire gauge used to connect the amplifier to power, and make sure it is
appropriate for the length of the wire run.
Over-temperature issue
Check the temperature of the amplifier and make sure it is under 50°C (122°F). If the
amplifier is hotter than the operational temperature rating, add ventilation to the
installation location or mount the amplifier in a different location.
NOTE: The amplifier will automatically attempt to recover from a recoverable fault (orange LED). If multiple
attempts of recovery are not successful, then the amplifier will transition to a critical fault status (red LED). You
can power cycle the amplifier or toggle the AMPLIFIER ON signal to reset the critical fault.
LED is Red
Potential Cause Potential Resolution
Power supply
under- or over-
voltage issue
Check the input power to make sure it is within the specified voltage operating range for
the amplifier.
If the amplifier experiences a number of under-voltage faults (orange LED) in a short
period of time, it will consider the issue a critical fault and change the LED color to red.
Therefore, a series of orange indicators followed by a red indicator may be due to an
under-voltage issue.
Prolonged over-
temperature issue
Check the temperature of the amplifier and make sure it is under 50°C (122°F). If the
amplifier is hotter than the operational temperature rating, add ventilation to the installa
tion location or mount the amplifier in a different location.
20 Fusion Apollo Series Installation Instructions
20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Garmin Fusion Apollo Series wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Garmin Fusion Apollo Series

Garmin Fusion Apollo Series Bedienungsanleitung - Deutsch - 22 seiten

Garmin Fusion Apollo Series Bedienungsanleitung - Holländisch - 22 seiten

Garmin Fusion Apollo Series Bedienungsanleitung - Französisch - 22 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info