Bedienungsanleitung Garmin GHP 12 Autopilot System (Seite 3 von 28) (Englisch)

501977

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

GHP12InstallationInstructions 3





The GHP 12 autopilot system consists of multiple components.

Familiarize yourself with all of the components before beginning

installation. You must know how the components operate together in

order to correctly plan the installation on your boat.

As you familiarize yourself with the GHP 12 components, conrm

that your package includes the items listed below. All the components,

except the drive unit, are included in the GHP 12 core box. The drive

unit is sold separately (page 8). If any parts are missing, contact your

Garmin dealer immediately.

Record the serial number of each component in the space provided.



The GHP 12 autopilot system consists of four main components: the

Course Computer Unit (CCU), the Electronic Control Unit (ECU), the

GHC

™

10 user control interface, and the drive unit (sold separately, see

page 8).



The CCU acts as the brain of the GHP 12. The CCU contains the

sensory equipment used to determine heading. The CCU connects to the

ECU and to the GHC 10 with a single cable. The CCU also connects

to a NMEA 2000

network to communicate with the GHC 10, and to

optional NMEA 2000-compatible devices, such as a chartplotter and a

wind sensor (page 11).





The ECU connects to the CCU and to the drive unit. The ECU controls

the drive unit based on information from the CCU. The ECU powers

both the CCU and the drive unit.





The GHC 10 is the primary interface used to operate the GHP 12

autopilot system. Using the GHC 10, you engage and steer the GHP 12.

You also set up and customize the GHP 12 using the GHC 10.

The GHC 10 connects to a NMEA 2000 network to communicate

with the CCU. The GHC 10 also connects with optional NMEA

2000-compatible devices, such as a wind sensor, a water-speed sensor,

or a GPS device, to use advanced features of the GHP 12. If NMEA

2000-compatible devices are not available, you can connect the GHC 10

to optional NMEA 0183-compatible devices instead.





The GHP 12 autopilot system includes multiple cables. These cables

connect the components to power, to each other, to an alarm, and to

optional devices.



This cable connects the CCU to the ECU. A portion of this cable

contains color-coded wires with bare ends. These wires connect the

CCU to the alarm and to the yellow wire from the GHC 10.



When installing the GHP 12 system, you may need to mount the

CCU farther than 16 ft. (5 m) from the ECU. Garmin offers optional

replacement or extension cables for purchase if this is necessary.

 

Replacement 32 ft. (10 m)

Replacement 66 ft. (20 m)

Extension 16 ft. (5 m)

Extension 50 ft (15 m)

Extension 82 ft. (25 m )

Contact your local Garmin dealer or Garmin Product Support for

ordering information.



The alarm provides audible alerts from the GHP 12 (page 9).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin GHP 12 Autopilot System Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin GHP 12 Autopilot System

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info