Bedienungsanleitung Garmin GPSMAP 8530 (Seite 10 von 12) (Englisch)

522257

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

Item Description

NMEA 0183-compliant device

NMEA 0183 cable

Item Garmin Wire Function Garmin Wire Color NMEA 0183 Device Wire Function

Power Red Power

Power ground Black Power ground

Data ground Black Data ground

RxB (-) Orange/white N/A

RxA (+) White TxA (+)

Lamp or Horn Connections

The device can be used with a lamp, a horn, or both, to sound

or flash an alert when the chartplotter displays a message. This

is optional, and the alarm wire does not need to be used in

order for the device to function normally. When connecting the

device to a lamp or horn, observe these considerations.

• The alarm circuit switches to a low-voltage state when the

alarm sounds.

• The maximum current is 100 mA, and a relay is needed to

limit the current from the chartplotter to 100 mA.

• To manually toggle visual and audible alerts, you can install

single-pole, single-throw switches.

Item Description

10–35 Vdc power source

Power cable

Horn

Lamp

NMEA 0183 cable

Relay (100 mA coil current)

Toggle switches to enable and disable lamp or horn alerts

Item Wire Color Wire Function

Red Power

Black Ground

Yellow Alarm

Video Input and Output Considerations

The GPSMAP 8500 allows video input from four composite

sources, and video output to two digital or analog displays.

When connecting video input and output sources, observe

these considerations.

• The four composite-video ports are labeled CVBS 1 IN,

CVBS 2 IN, CVBS 3 IN, and CVBS 4 IN.

◦ These four ports use BNC connectors. You can use a

BNC to RCA adapter to connect a composite-video

source with RCA connectors to these ports.

◦ The video from sources connected to these ports is

available only for display on the GMM or on an additional

monitor connected to the same GPSMAP 8500.

Composite video is not shared across the Garmin Marine

Network or NMEA 2000 network.

• The two DVI-I output ports are labeled MAIN DVI-I VIDEO

OUT and MIRROR DVI-I VIDEO OUT. These two ports use

DVI-I connectors, and are compatible with a variety of digital

and analog connectors and adapters.

◦ You can use a DVI-D cable to connect to a GMM or other

DVI-compatible digital display. If needed, you can use a

DVI-D to HDMI adapter to connect to an HD TV or other

HDMI-compatible display.

◦ You can use a DVI-I cable to connect to a computer

monitor or other DVI-I-compatible display. If needed, you

can use a DVI-I to VGA adapter to connect to a VGA-

compatible display.

• The MAIN DVI-I VIDEO OUT port is designed for use with

the primary GMM. See page 4 for more information. A third-

party monitor can be connected to this port, but will not allow

for touchscreen interface with the device.

• The MIRROR DVI-I VIDEO OUT port allows you to view a

mirror image of the MAIN DVI-I VIDEO OUT on a connected

display.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin GPSMAP 8530 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin GPSMAP 8530

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info