Bedienungsanleitung Garmin Xero A1 (Seite 5 von 14) (Englisch)

691376

Zoom out

Zoom in

Vorherige Seite

1/14

Nächste Seite

Getting Started

WARNING

Always inspect your equipment prior to shooting an arrow.

Always understand your target and what lies beyond your target

before taking a shot. Failure to account for your shooting

environment could cause property damage, injury, or death. You

are responsible for understanding and complying with any

applicable regulations for shooting a bow and arrow.

This device has a protective housing which, when in place,

prevents human access to laser radiation in excess of the

accessible emission limit (AEL) for Class 1 laser products. This

device should not be modified or operated without its housing or

optics. Operating this device without a housing and optics, or

operating this device with a modified housing or optics that

expose the laser source, may result in direct exposure to laser

radiation and the risk of permanent eye damage. Removal or

modification of the diffuser in front of the laser optic may result in

the risk of permanent eye damage.

See the Important Safety and Product Information guide in the

product box for product warnings and other important

information.

Video Tutorials

You can view video tutorials for installing and setting up your

Xero bow sight at www.garmin.com/xerotutorials.

Device Overview

LCD screen Displays target range and device settings

Buttons Select to move through menus, select options, and

configure the device (Buttons, page 1)

Laser

rangefinder

trigger

Hold to activate the laser rangefinder

Tap to reset the pin timer or display fixed pins

Mounting rail Attaches the device to the included mount

Level Shows when the device is level

Optic Displays the pins

Battery door Remove to install batteries

Laser receiver Receives laser light for measuring the distance to a

target

Laser emitter Emits laser light for measuring the distance to a

target

Device label View manufacturer's identification and certification

March 21, 2018

Buttons

• Press OK to open the main menu and select menu options.

• Press or to move through menus.

• Press or to adjust the pin brightness.

• Hold or to set a pin manually.

• Press to return to a previous menu.

• Press to turn the device on.

• Hold to turn the device off.

Installing AAA Batteries

The device operates on two AAA lithium batteries (not included).

Lithium batteries are required for this device. Alkaline and NiMH

batteries do not meet the power requirements for auto-ranging

functionality. When using alkaline or NiMH batteries, the sight

functionality may be reduced to standard fixed pin sighting only.

Using a 5/64 inch hex wrench, loosen the four screws

, and

remove the battery door

from the side of the device.

Insert two AAA lithium batteries into the device, observing

polarity.

Replace the battery cover, and secure the screws to a

maximum torque specification of 0.5 N-m (4 lbf-in).

Mounting the Sight on a Bow

Insert the curved rail mount

from the back of the bow sight

into the grooves at the front of the mount assembly

Getting Started 1

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin Xero A1 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin Xero A1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info