Bedienungsanleitung GE G100 - Power PRO Series (Seite 3 von 89) (Englisch)

602636

Zoom out

Zoom in

Vorherige Seite

1/89

Nächste Seite

iiii 1

SAFETY PRECAUTIONS

Camera Notes:

Do not store or use the camera in the following types of locations:

• In rain, very humid or dusty places.

• In a place where the camera can be exposed directly to

sunlight or subject to high temperatures, e.g. Inside a

closed car in summer.

•

In a place where the camera is subject to a high magnetic

eld, e.g. near motors, transformers or magnets.

Do not place the camera on a wet surface or or in places

where dripping water or sand may come in contact with the

camera; doing so may cause irreparable damage.

If the camera will not be used for a long period of time, we

suggest you remove the batteries and the memory card from

the camera and keep them in dry environment.

Moisture may form inside the camera if the camera is suddenly

taken from a cold location to a warm location. Allow moisture

to completely dry prior to turning on the camera.

If water has penetrated the camera housing, turn the camera

o and remove the battery and memory card. Allow the camera to

air-dry for at least 24 hours before attempting to use again.

If camera overheats, while in use or charging, disconnect the

camera and carefully remove batteries.

Battery Notes:

Incorrect use of the batteries may cause them to leak, become

hot, ignite or burst. Always observe the precautions given below:

• Do not expose the batteries to water and take particular

care to keep the terminals dry

•

Do not heat the batteries or throw them into a re

• Do not attempt to deform, disassemble or modify the batteries

Keep the batteries out of reach of babies and small children.

In cold locations, battery performance will deteriorate and the

life span of the battery may be compromised.

Memory Card Notes:

When using a new or used SD memory card, or a SD memory

card that has been initialized by a PC or a dierent model

camera, be sure to reformat the card with your digital camera

before attempting to use it.

When editing image data, copy the image data to your PC’s

hard disk rst.

Do not change folder or le name in the memory card of the

computer. An edited le cannot be displayed on the LCD screen

of the camera. To edit image data, please copy the image data

to the computer’s hard disk drive rst.

The photos taken by this camera are stored in the auto-

generated folder on the SD memory card. Do not store photos

that are not taken by this model camera, as this may cause a

read error to occur when the camera is in playback mode.

Do not remove the memory card without turning the camera

o to avoid possible damage of your els and memory card.

Do not switch o the digital camera when the writing process

is initiated to avoid incomplete data writing and damage or

loss of pictures.

Align the SD memory card correctly before inserting it into the

camera's SD memory card slot. Do not force the SD memory

card into the camera's SD memory card slot.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

GE G100 - Power PRO Series Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von GE G100 - Power PRO Series

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info