Bedienungsanleitung Wellis In.Grid (Seite 5 von 108) (Englisch)

784855

Zoom out

Zoom in

Vorherige Seite

1/108

Nächste Seite

FOR YOUR SAFETY PLEASE ALWAYS PERFORM THE

FOLLOWING PRECAUTIONS. IF YOU DO NOT FOL-

LOW THE WARNINGS AND INSTRUCTIONS, ITEMS

MAY GET DAMAGED, YOU MAY GET INJURED,

OR YOU MAY SUFFER FATAL INJURY. IMPROPER

INSTALLATION AND OPERATION INVALIDATES THE

WARRANTY.

Initial safety warnings

The spa must be powered through a residual current device

(RCD) with a current release not exceeding 30mA.

The devices and parts which contain active parts – except

those which are powered from protective extralow voltage

not exceeding 12V – must be inaccessible from the spa.

ABOUT THE ENVIROMENTALLY SAFE WATER

DRAINING

The spa must be powered through a residual current device

(RCD) with a current release not exceeding 30mA.

The devices and parts which contain active parts – except

those which are powered from protective extralow voltage

not exceeding 12V – must be inaccessible from the spa.

About the enviromentally safe water draining

The water temperature in the spa should never exceed

40°C (104°F). The water temperature is considered safe for

a healthy adult at 36 to 38°C. Lower water temperature is

recommended for younger children or when the spa is used

for more than 10 minutes.

Spa heat can cause hyperthermia!

Symptoms: drowsiness, heaviness

Children under 14 years of age can only use and operate the

products mounted with hydromassage system under adult

supervision.

People with heart disease, low or high blood pressure,

circulatory disorders, diabetes, and excessive weight should

consult their physician prior to using the spa.

Consumption of alcohol or drugs while using the spa greatly

increases the chance of fatal overheating.

A person taking medications should consult a doctor before

using the spa as some medicines may cause drowsiness

while others may affect the heart rate, blood pressure, and

circulation.

Persons who suffer from infectious diseases should not use

the spa.

Because high water temperature poses a high risk to the

fetus and may cause serious fetal damage we advise that

(potentially) pregnant women do not use the spa at a water

temperature higher than 38°C. Wet surfaces can be slippery.

Note and warn your child about this when entering and

leaving the spa. To avoid injury carefully get into and out of

the spa.

Do not use the spa if the suction cover is damaged or missing.

Never place any electric device within a 2-meter radius of the

spa - it can cause electrical shock. Electric devices fallen into

water may cause death, electric shock, or serious personal

injuries.

It is prohibited to remove the panels while using the spa.

Water treatment should be carried out with caution. Improp-

erly chemically treated* water may cause skin irritation.

When the spa is not in use, cover the spa with the cover to

prevent ultraviolet radiation causing damage to the product.

Do not allow your child to climb on the thermo cover when it

is on the water-filled spa.

Do not remove any suction sealing. Do not operate the spa if

the suction sealing is broken or missing.

WARNING! The metallic parts of the pool may become hot

when exposed to sunlight and can cause injury!

Keep your clothes and jewellery away from rotating jets and

moving parts.

Test the residual current device before use.

Disconnect the spa from the power supply before servicing

its electrical parts. (This operation can only be performed by

qualified professionals).

It is strictly prohibited to use the spa in a not completely

assembled state (e.g. detached side panel)

Chemical treatment of water can only be performed by per-

sons under the age of 18 under parental supervision.

Maintenance can only be performed by trained professionals.

The user should check the electrical wiring every 3 months. It

is required to perform a check by a professional every 3 years.

Mains fuses / circuit breakers may be activated because of

power outages.

Installation and wiring of the spa, replacement of power cord,

and any repairs must be performed by qualified professionals.

It is required to build in an isolating device to the fixed wiring.

Plug’n’play safety warnings

Beyond the previous warnings, please also pay

attention to the undermentioned ones.

ATTENTION! The electrical receptacle must be located at least

2.5 meters from the spa so that bathers in a sitting position

cannot reach it from the water. The plug can only be connected

to a receptacle* equipped with 2.5mm 2 diameter cables

ATTENTION! RISK OF ELECTRIC SHOCK. The connector with

residual current device must be inspected before every use.

ATTENTION! Only place the RCD plug in a receptacle equipped

with RCD.

ATTENTION! Before you insert the plug into the socket ensure

that the current of the socket and the fixed wiring is appropriate

for the properties of the spa.

The spa must be equipped with an isolation transformer or

powered through a residual current device with a release

current not exceeding 30mA.

THIS PRODUCT IS EQUIPPED WITH A GROUND

FAULT CIRCUIT BREAKER (GFCI) IN THE CONNEC-

TOR. GFCI MUST BE TESTED BEFORE EACH USE.

If the power cable is damaged, it must immediately be re-

placed by the manufacturer or a service professional in order

to minimize danger.

To minimize the risk of electric shock do not use extension

leads to connect the product to the power supply.

Ensure that the receptacle is properly located.

Parts of the equipment cannot be placed above the spa

during usage.

SAFETY INSTRUCTIONS

Wellis In.Grid Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Wellis In.Grid

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info