519999
31
Zoom out
Zoom in
Vorherige Seite
1/34
Nächste Seite
34
27
Paging
Dial Mode
To stop paging, press the key on the base again
or any key on the handset.
You can page the handset from the base unit.
The handset will ring ring with a special tone.
This is useful to locate a lost handset.
Press the key on the base unit (less than 5
seconds), all the handsets registered to the
base will ring for about 60 seconds.
You can change the dial mode using the
following steps:
1. Press the Menu soft key.
2. Press the key repeatedly to choose BS
Settings, and press the Select soft key.
3. Use the key to choose Dial Mode, then
press the Select soft key.
4. You can press the key to select the required
dial mode options (Tone/Pulse) and press the
Save soft key. A confirm beep will be heard.
Note:
If you are not sure which dialing mode to
select, please contact your local service
provider.
Note:
On a long key press, more than or equal to
5 seconds, the base will enter subscription
mode. For details, see page 38.
You can store up to 4 numbers in direct memory.
All the number will be stored in phone book.
Storing Memory Numbers
One-Touch Memories
Dialing from One-touch Memories
In the Standby mode, press M1 to M4 button to
dial out the corresponding number.
1. Press the memory key (M1 to M4) in Standby
mode.
2. The display shows "Number ?". Enter the
desired number (up to 20 digits), press the
Next soft key.
3. Use the key to select the ring you like to
associate with the number, press the Save soft
key to confirm.
Viewing Memory Numbers
1. In the Standby mode, press the Down key.
2. Press the key repeatedly until the desired
number is displayed.
Editing Memory Numbers
Perform the steps of the Editing the Phone book
Entries paragraph.
Note:
The memory default names are M1: to M4:,
you can add something behind them but
cannot delete the default name. e.g. you can
modify M1 as M1: home.
Deleting Memory Numbers
Perform the steps of the Deleting the Phone book
Entries paragraph.
31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Geemarc AmpliDECT 280 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Geemarc AmpliDECT 280

Geemarc AmpliDECT 280 Bedienungsanleitung - Deutsch - 67 seiten

Geemarc AmpliDECT 280 Bedienungsanleitung - Holländisch - 38 seiten

Geemarc AmpliDECT 280 Bedienungsanleitung - Französisch - 80 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info