761806

Geemarc Amplidect 295 Photo Seite 2

2
Zoom out
Zoom in
Vorherige Seite
1/2
Nächste Seite
5 6 7 8
After a short delay, if the registration is successful, there will
be a confirmation beep, and the handset display will go back
to idle mode with the new handset number shown. The base
display will also go back to idle mode.
De-Registration
On Handset: Press MENU/OK , select ▼▲BS SETTINGS,
press MENU/OK , select ▼▲DELETE HS, press
MENU/OK enter PIN 0000, press MENU/OK ,
select ▼▲one of the handsets that you want to de-register,
press MENU/ OK to confirm.
INTERCOM
Internal Call
Press C/MUTE , Enter the desired handset number on
keypad.
If you receive a call on the base in speaker mode, the call is
automatically transferred on the handset if the handset is
removed from the charger.
Call All Handsets
Press C/MUTE , Enter "9" on keypad.
Transfer an External Call
Press MENU/OK , select ▼▲ INTERCOM, Press
MENU/OK ,
Enter the desired handset number on keypad.
After connection end the call on handset.
Conference Call
Press MENU/OK , select ▼▲ INTERCOM, Press
MENU/OK ,
Enter the desired handset number on keypad.
After connection press and hold until CONFERENCE is
shown.
NOTE: Any party hangs up during a conference call will leave
the other party still connected with the external call.
PHONEBOOK
Your phone can store up to 50 private phonebook in the cordless
handset and the telephone base with names and numbers.
Each phonebook entry can have a maximum of 20 digits for the
phone number and 12 characters for the name. You can also
select different ring tones for your phonebook entries.
Phonebook entries are stored alphabetically by name.
To Add new entry
In idle mode :
Press MENU/OK , select ▼▲PHONEBOOK to access
the phonebook list (or empty),
Press MENU/OK to select ADD.
Press MENU/OK to select NAME ,enter the name.
Press MENU/OK to select NUMBER, enter number.
Press MENU/OK and ▼▲ to select the desired
ringtone for your phonebook entry.
Press MENU/OK to save.
DIRECT MEM
Your AMPLIDECTTM295 base can also paired as additional
handsets with some specific handset/device like our
PhotoDECT295 or SOS-PRO 295 which need direct memory
numbers programed in the base, and these numbers (4 maxi)
have to be added through the regular handset.
On Handset : Press MENU/OK , select ▼▲DIRECT
MEM,
Press MENU/OK , select ▼▲M1-M2-M3-M4,
Press MENU/OK , enter number then OK.
Picture big button Memories
You can store up to 10 picture memories.
In idle mode: Press , enter the phone number with
the picture keys(eg. M0 for the digit 0), Press and
press the picture memory button what you have chosen.
NOTE: To use a picture big button memory in idle mode,
press and hold the picture until the LED turns on, on the base.
If you want to pass the number from the base to the handset,
lift the handset off the base to take the call.
ANSWERING MACHINE
Your telephone base includes a telephone answering machine
that records unanswered calls when it is on. The answering
machine can store up to 59 messages within the maximum
recording time of approximately 15 minutes. As well as
recording incoming messages, you can record memos for
other users of your phone.
Switching Answering Machine On/Off
Using the handset:
1. Press LEFT SOFTKEY and ▼/▲ to select ANS.
MACHINE.
2. Press LEFT SOFTKEY and ▼/▲ to select TAM
ON/OFF.
3. Press LEFT SOFTKEY and ▼/▲ to select ON or
OFF.
4. Press LEFT SOFTKEY to confirm.
Play Messages on TAM
If you have new messages, the display will show e.g. 02/05
MSGS, which means you have 2 new message out of total 5
messages. New messages are played first, and then are saved
as old messages, until they are deleted. Old messages are
played again after all new messages are played completely.
Using the handset:
1. Press LEFT SOFTKEY and ▼/▲ to select ANS.
MACHINE.
2. Press LEFT SOFTKEY to show MSG PLAYBACK.
3. Press LEFT SOFTKEY again to start message
playback and the screen displays the date of the message
received.
4. During message playback, press ▼/▲ to adjust the
message playback volume respectively.
NOTE: After new message is played, the new message will
be saved as an old message automatically unless it is
deleted.
5. Press LEFT SOFTKEY and ▼/▲ to select STOP,
FORWARD, PREVIOUS or DELETE to perform the
following functions during message playback.
• STOP: Stop the current message playback and return to
the ANS. MACHINE menu.
• FORWARD: Skip to play the next message. The date
information of the next message will display if there is next
message.
• PREVIOUS: Skip to repeat playing the current message
from the beginning. The date information of the current
message will display.
• DELETE: Delete the current message and the next
message will be played.
6. Press LEFT SOFTKEY to confirm the setting.
Set the Answer Delay
You can set the number of rings before the answering machine
answers and starts playing your OGM. You can set the
answering machine to answer after two to eight rings or TIME
SAVER.
The TIME SAVER function answers calls after 6 ring signals,
until the first new message has been registered - then the
answering machine switches to answering after approximately
2 signals. This is useful when using remote access; if you call
up the answering machine and there is no reply after four
rings it means there are no messages recorded and you can
hang up before you are charged for the call.
Using the handset:
1.Press LEFT SOFTKEY and ▼/▲ to select ANS.
MACHINE.
2.Press LEFT SOFTKEY and ▼/▲ to select TAM
SETTINGS.
3.Press LEFT SOFTKEY and ▼/▲ to select ANSWER
DELAY (Available options: 2 RINGS, 4 RINGS, 6 RINGS, 8
RINGS or TIME SAVER).
4.Press LEFT SOFTKEY and ▼/▲ to select your desired
answer delay.
5.Press LEFT SOFTKEY to confirm.
REMOTE OPERATIONS
If you are away from your home, you can call your answering
machine to switch on or off the answering machine and listen
to your messages remotely using another tone-dialing phone.
1. Place a call from a tone-dialing phone.
2. When the answering machine answers the call and starts
playing OGM, press .
3. Enter the 4-digit Remote Access PIN (default PIN is 0000).
4. Press the following keys to carry out your desired function.
key
Functions
While message is
not playing
While message is playing
2
Delete the current message playback
4
Repeat playing the current message
from the beginning. Press twice to skip
backward to the previous message.
5
Play the message
Pause the current message playback
6
Skip forward to play the next message
7
Turn on the
answering machine
9
Turn off the
answering machine
*
Enter the 4-digit
remote access PIN
NOTE: When your answering machine memory is full and the
answer mode is in ANS & RECORD, the answer mode will
change to ANSWER ONLY automatically.
It will change to ANS & RECORD mode automatically after
some messages have been deleted.
You cannot delete new messages before they have been
listened to.
TECHNICAL SPECIFICATIONS
Basic Information
Valid Range
Indoor: 50m / Outdoor:300m
Handset Operating
time
Standby time : 100 hours
Talk time : 10 hours approx.
RF Parameter
Frequency
1.88 GHz to 1.9GHz
Nb Channels
10
Power Supply
Base
Input 100-240V 50/60Hz;
Output 6V; 450mA adapter
Charger
Input 100-240V 50/60Hz;
Output 6V; 450mA adapter
2.4V; 500mAH rechargeable NiMh
battery pack
MAINTENANCE
Clean the surface of the housing with a soft, fluff-free cloth.
Do not use any cleaning agents or solvents.
GUARANTEE
From the moment your Geemarc product is purchased,
Geemarc guarantee it for the period of two years. During this
time, all repairs or replacements (at our discretion) are free of
charge. Should you experience a problem then contact our
help line or visit our website at www.geemarc.com.
The guarantee does not cover accidents, negligence or
breakages to any parts. The product must not be tampered
with or taken apart by anyone who is not an authorized
Geemarc representative.
The Geemarc guarantee in no way limits your legal rights.
IMPORTANT: YOUR RECEIPT IS PART OF YOUR
GUARANTEE AND MUST BE RETAINED AND PRODUCED
IN THE EVENT OF A WARRANTY CLAIM.
Please note: The guarantee applies to the United
Kingdom only.
DECLARATIONS:
CE Directives
Geemarc Telecom SA hereby declares that this product is in
compliance with the essential requirements and other relevant
provisions of the Radio and Telecommunications Terminal
Equipment Directive 2014/53/UE.
The CE declaration of conformity may be consulted at
www.geemarc.com
Electrical connection: The apparatus is designed to operate
from a 230V 50Hz supply only. (Classified as hazardous
voltage according to EN60950 standard). The apparatus does
not incorporate an integral power on/off switch. To switch off
the apparatus, disconnect the power adaptor.
When installing the apparatus, ensure that the mains power
socket is readily accessible.
Telephone connection: Voltages present on the
telecommunication network are classified TNV-3
(Telecommunication Network Voltage) according to the
EN60950 standard.
Recycling Directives
The WEEE (Waste Electrical and Electronic Equipment) has
been put in place for the products at the end of their useful
life are recycled in the best way.
When this product is finished with, please do not put it in your
domestic waste bin. Please use one of the following disposal
options:
- Remove the batteries and deposit them in an appropriate
WEEE skip.
Deposit the product in an appropriate WEEE skip.
- Or, hand the old product to the retailer. If you purchase a
new one, they should accept it.
Thus if you respect these instructions you ensure human
health and environmental protection.
For product support and help visit our website at
www.geemarc.com
United Kingdom: 5B Swallow Court, Swallowfields, Welwyn
Garden City, Hertfordshire, AL7 1SB,UK
telephone 01707 387602 or fax 01707 832529
QUGAMPLIDECT295-Photo_En_A3_V1.3
2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

geemarc-amplidect-295-photo

Suche zurücksetzen

  • wie kann ich im Display die Eingabe "Handset 1" löschen Eingereicht am 6-11-2022 14:56

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Geemarc Amplidect 295 Photo wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Geemarc Amplidect 295 Photo

Geemarc Amplidect 295 Photo Bedienungsanleitung - Deutsch - 28 seiten

Geemarc Amplidect 295 Photo Bedienungsanleitung - Deutsch - 2 seiten

Geemarc Amplidect 295 Photo Bedienungsanleitung - Holländisch - 50 seiten

Geemarc Amplidect 295 Photo Bedienungsanleitung - Holländisch - 2 seiten

Geemarc Amplidect 295 Photo Bedienungsanleitung - Französisch - 29 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info