695912

Geemarc Amplidect Combi 595 Seite 2

2
Zoom out
Zoom in
Vorherige Seite
1/2
Nächste Seite
678910
On Handset:
1. Press
MENU/OK, and ▼/▲ to select INTERCOM. Press
MENU/OK.
2. Choose the desired handset number, Base or ALL and press
MENU/OK.
After connection quit the call on handset by pressing
.
Conference Call
On Handset or Base: Make procedure in chapter external call and choose
the desired handset number with the key
▼/▲.
After connection press and hold
until CONFERENCE is shown.
NOTE:
Any party that hangs up during a conference call will leave the
other party still connected with the external call.
Your phone can store up to 50 private phonebooks with names and
numbers. Each phonebook entry can have a maximum of 20 digits for
the phone number and 10 characters for the name.
Phonebook entries are stored alphabetically by name and are identical in
the base and handset.
To add new entry
In idle mode:
On Base:
1. Press
MENU/OK, and ▼/▲ to select PHONEBOOK and press
twice
MENU/OK to access the phonebook list (or empty).
2. Press
MENU/OK and select ADD.
3. Press
MENU/OK then enter phone number.
4. Press
MENU/OK and enter the name.
5. Press
MENU/OK to save.
On handset:
1. Press
, and ▼/▲ to select PHONEBOOK and press
twice to access the phonebook list (or empty).
2. Press
and select ADD.
3. Press
then enter phone number.
4. Press
and enter the name.
5. Press
to save.
On Handset
1. Press MENU/OK and ▲/▼ to select PHONEBOOK.
2. Press
MENU/OK and ▲/▼ to select SPEED DIAL.
3. Press
MENU/OK, use. ▲/▼ to select the speed dial key.
4. Press
MENU/OK
, select ADD or EDIT.
5. Press
MENU/OK then enter the phone number.
6. Press
MENU/OK
then enter the NAME.
7. Press
MENU/OK to confirm.
To use one speed dial key, press and hold
in idle mode the key between
1 to 9 for 3 seconds (you hear a beep of confirmation). It is the same
speed dial keys for the base and for the handsets cordless.
SOS settings
You need to set the SOS numbers before you can make SOS emergency
calls.
On Base:
1. Press
MENU/OK, and ▼/▲ to select SET SOS.
2. Press
MENU/OK, and ▼/▲ to select SOS NUMBER.
3. Press
MENU/OK and ▼/▲ to select the SOS number to edit
(SOS 1, SOS 2, SOS 3 or SOS 4).
4. Press
MENU/OK and select ADD to enter a new number or EDIT
to modify the number stored already.
5. Press
MENU/OK and enter a phone number or edit the number
stored already.
6. Press
MENU/OK and enter a new name or edit the name stored
already.
7. Press
MENU/OK to confirm or to delete.
On handset:
1. Press
, and ▼/▲ to select SET SOS.
2. Press
, and ▼/▲ to select SOS NUMBER.
3. Press
and ▼/▲ to select the SOS number to edit (SOS 1,
SOS 2, SOS 3 or SOS 4).
4. Press
and select ADD to enter a new number or EDIT to
modify the number stored already.
5. Press
and enter a phone number or edit the number stored
already.
6. Press
and enter a new name or edit the name stored already.
7. Press
to confirm or to delete.
Make SOS emergency calls
On Base
Press and hold
2 seconds on the base to launch the
emergency calling sequence from the SOS 1 number to SOS 4 number. A
call will be first dialed to the SOS 1 number. If the SOS 1 number does
not answer in 60 seconds, the call be will made to the SOS 2 number,
and so on. See note.
On handset
Press and hold
3 seconds on the handset to launch the emergency
calling sequence from the SOS 1 number to SOS 4 number. A call will be
first dialed to the SOS 1 number. If the SOS 1 number does not answer in
60 seconds, the call be will made to the SOS 2 number, and so on. See note.
NOTE:
● The other party receiving the SOS message must press any number on
their phone to open the SOS call. Thereafter by pressing any number
on their phone every two minutes will keep the emergency call open
else the phone stops the call 10 seconds after.
● To stop the procedure launch by error, press and hold the SOS key
until the alarm SOS stop.
Record SOS messages
You can record your customized SOS message to be played when you
dial out an SOS emergency call otherwise the default message will be
played.
On Base
1. Press
MENU/OK, and ▼/▲ to select SET SOS.
2. Press
MENU/OK, and ▼/▲ to select SOS MSG.
3. Press
MENU/OK and ▼/▲ to select RECORD.
4. Press
MENU/OK to start SOS message recording and
“RECORDING ANNC...” will be displayed.
5. Press
MENU/OK to save your SOS message.
On handset:
1. Press
, and ▼/▲ to select SET SOS.
2. Press
, and ▼/▲ to select SOS MSG.
3. Press
and ▼/▲ to select RECORD.
4. Press
to start SOS message recording and “RECORDING” will
be displayed.
5. Press
to save your SOS message.
Play SOS messages
On Base
1. Press
MENU/OK, and ▼/▲ to select SET SOS.
2. Press
MENU/OK, and ▼/▲ to select SOS MSG.
3. Press
MENU/OK and ▼/▲ to select PLAY.
4. Press
MENU/OK to to start SOS message playback.
5. Press
/ PLAY/STOP to stop SOS message playback.
On handset:
1. Press
, and ▼/▲ to select SET SOS.
2. Press
, and ▼/▲ to select SOS MSG.
3. Press
and ▼/▲ to select PLAY.
4. Press
to start SOS message playback.
5. Press
or 5 key to stop SOS message playback.
You have the choice to store 3 picture memories and one direct memory
on the base.
On Base:
1. Press
MENU/OK, and ▼/▲ to select PHOTO MEM.
2. Press
MENU/OK, and ▼/▲ to select M1 to M4.
3. Press
MENU/OK and ▼/▲ to select ADD or EDIT and VOICE
TAG.
4. Press
MENU/OK then enter number.
5. Press
MENU/OK then enter name.
6. Press
MENU/OK to save.
On handset:
1. Press
, and ▼/▲ to select PHOTO MEM.
2. Press
, and ▼/▲ to select M1 to M4.
3. Press
and ▼/▲ to select ADD or EDIT and VOICE TAG.
4. Press
then enter number.
5. Press
then enter name.
6. Press
to save.
You have the option to enter a voice name in choose VOICE TAG and
RECORD at the point 3.
If you receive a call with the number registered with a voice tag, you can
hear the voice name on the base and on the handset.
NOTES:
● To use a picture big button memory in idle mode, press the picture on
the base.
● If you want to pass the call from the speakerphone to the handset, lift
the handset off the base to take the call.
● If the handset is not placed on the base, press to take the line in
speakerphone mode and place the handset on the base.
Your telephone base includes a telephone answering machine that records
unanswered calls when it is on. The answering machine can store up to
59 messages within the maximum recording time of approximately 15
minutes. As well as recording incoming messages, you can record memos
for other users of your phone.
Switching Answering Machine On/Off
On Base:
Press
ANS ON/OFF to switch the answering machine ON or OFF.
On handset:
1. Press
, and ▼/▲ to select ANS.SYS.
2. Press
, and ▼/▲ to select TAM ON/OFF.
3. Press
and ▼/▲ to select ON or OFF.
4. Press
to confirm.
Play Messages on TAM
If you have new messages, the display will show e.g.2 NEW MESSAGES,
which means you have 2 new messages. The new messages are played
first, and then are saved as old messages, until they are deleted. Old
messages are played again after all new messages are played completely.
On Base: Press
/ PLAY/STOP to start the playback.
On handset:
1. Press
, and ▼/▲ to select ANS.SYS.
2. Press
, and ▼/▲ to show PLAYBACK.
3. Press
to start message playback and the screen displays the
date and hour of the message received.
4. During message playback, press ▼/▲ to adjust the message playback
volume respectively.
NOTES:
After new message is played, the new message will be
saved as an old message automatically unless it is deleted.
5. Press
and ▼/▲ to select STOP, FORWARD, PREVIOUS or
DELETE to perform the following functions during message playback.
● STOP: Stop the current message playback and return to the ANS.
MACHINE menu.
● SLOW ON: to reduce the speed of the playback.
● FORWARD: Skip to play the next message.
The date and hour information of the next message will display if
there is next message.
● PREVIOUS: Skip to repeat playing the current message from the
beginning. The date and hour information of the current message
will display.
● DELETE: Delete the current message and the next message will be
played.
6. Press
to confirm the setting.
Set the Answer Delay
You can set the number of rings before the answering machine answers
and starts playing your OGM. You can set the answering machine to
answer after two to ten rings or TIME SAVER.
The TIME SAVER function answers calls after 6 ring signals, until the first
new message has been registered then the answering machine switches
to answering after approximately 2 signals. This is useful when using
remote access; if you call up the answering machine and there is no reply
after four rings it means there are no messages recorded and you can
hang up before you are charged for the call.
On handset:
1. Press
, and ▼/▲ to select ANS.SYS.
2. Press
, and ▼/▲ to show SET TAM.
3. Press
and ▼/▲ to select ANSWER DELAY.
4. Press
and ▼/▲ to choose: 2 RINGS, 4 RINGS, 6 RINGS, 8
RINGS, 10 RINGS or TOLL SAVE.
5. Press
to confirm the setting.
REMOTE OPERATIONS
If you are away from your home, you can call your answering machine to
switch on or off the answering machine and listen to your messages
remotely using another tone-dialing phone.
1. Place a call from a tone-dialing phone.
2. When the answering machine answers the call and starts playing
OGM, press
.
3. Enter the 4-digit Remote Access PIN (default PIN is 0000).
4. Press the following keys to carry out your desired function.
KEY FUNCTION
While message is not playing While message is playing
2
Delete the current message
pla
y
back
4
Repeat playing the current
message from the beginning.
Press twice to skip backward to
the previous message
5
Stop the current message playbac
k
6
Skip forward to play the next
message
7
Turn on the answering machine
9
Turn off the answering machine
Enter the 4-digit remote access
PIN
NOTES:
● When your answering machine memory is full, the answer mode will
change to ANSWER ONLY automatically.
● It will change to ANS & RECORD mode automatically after some
messages have been deleted.
● You cannot delete new messages until they have been listened to.
FUNCTION MESSAGE ALERT
When you have a new message, you can hear a beep every 10 seconds.
If you want deactivate this beep, follow the procedure.
Using the handset:
1. Press
, and ▼/▲ to select ANS.SYS.
2. Press
, and ▼/▲ to show SET TAM.
3. Press
and ▼/▲ to select MSG ALERT.
4. Press
and ▼/▲ to select OFF.
5. Press
to confirm.
You have the choice to enter 10 Alarms.
On handset:
1. Press
, and ▼/▲ to select REMINDER.
2. Press
, and ▼/▲ to select your alarm.
3. Press
and ▼/▲ to select ON/OFF.
4. Press
and select ON.
5. Press
and enter the time.
6. Press
and choose the frequency.
7. Press
to confirm.
You have the choose to activate or deactivate the function Talking Digits.
Activate: this function announces the digit dial or the CID number when
you receive a call and that you have subscribed to the service.
On Base:
1. Press
MENU/OK, and ▼/▲ to select TLK DIGITS.
2. Press
MENU/OK, and ▼/▲ to select ON to OFF.
3. Press
MENU/OK to confirm.
On handset:
1. Press
, and ▼/▲ to select TLK DIGITS.
2. Press
, and ▼/▲ to select ON to OFF.
3. Press
to confirm.
Sometimes, our phone rings one time to inform that we have any voice
message on the line. To remove this ringer, you must activate the function.
On the base In idle mode :
1. Press
MENU/OK, and ▼/▲to select BS SETTING.
2. Press
MENU/OK and ▼/▲to select FIRST RING.
3. Press
MENU/OK and select ON.
4. Press
to save.
Clean the surface of the housing with a soft, fluff-free cloth. Do not use
any cleaning agents or solvents.
From the moment your Geemarc product is purchased, Geemarc
guarantee it for the period of two years. During this time, all repairs or
replacements (at our discretion) are free of charge. Should you
experience a problem then contact our help line or visit our website at
www.geemarc.com.
The guarantee does not cover accidents, negligence or breakages to
any parts. The product must not be tampered with or taken apart by
anyone who is not an authorized Geemarc representative.
The Geemarc guarantee in no way limits your legal rights.
IMPORTANT: YOUR RECEIPT IS PART OF YOUR GUARANTEE AND
MUST BE RETAINED AND PRODUCED IN THE EVENT OF A
WARRANTY CLAIM.
Please note: The guarantee applies to the United Kingdom only.
CE Directives
Geemarc Telecom SA hereby declares that this product is in compliance
with the essential requirements and other relevant provisions of the Radio
and Telecommunications Terminal Equipment Directive RED 2014/53/UE.
The CE declaration of conformity may be consulted at www.geemarc.com
Recycling Directives
The WEEE (Waste Electrical and Electronic Equipment) has been put in
place for the products at the end of their useful life are recycled in the
best way.
When this product is finished with, please do not put it in your domestic
waste bin. Please use one of the following disposal options:
- Remove the batteries and deposit them in an appropriate WEEE skip.
Deposit the product in an appropriate WEEE skip.
- Or, hand the old product to the retailer. If you purchase a new one, they
should accept it.
Thus if you respect these instructions you ensure human health and
environmental protection.
Basic Information
Valid Ran
g
e: Indoor : 50m I Outdoor:300m
Handset
Operatin
g
Time:
Standby time : 100 hours
Talk time : 10 hours approx
RF Paramete
r
Fre
q
uenc
y
: 1.88 GHz to 1.9GHz
Nb Channels: 10
Power Supply
Base: In
p
ut:100-240V 50/60Hz; Out
p
ut: 6V, 800mA ada
p
te
r
Char
g
er: In
p
ut:100-240V 50/60Hz; Out
p
ut: 6V, 450mA ada
p
te
r
Handset: 3 batteries, AAA 1.2V/600mAh rechar
g
eable
For product support and help visit our website at ww.geemarc.com
United Kingdom: 5B Swallow Court, Swallowfields, Welwyn Garden
City, Hertfordshire, AL7 1SB,UK
telephone 01707 387602
or fax 01707 832529
UGAMPLIDECTCOMBI 595_En_A3+_V1.3
Technical specifications
DECLARATIONS
GUARANTEE
MAINTENANCE
Function First rin
g
Talkin
g
function
Alarm function
A
nswerin
g
machine
Picture bi
g
button memories
SOS emer
g
enc
y
call
Set Speed Dial Ke
y
Phonebook
2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

geemarc-amplidect-combi-595

Suche zurücksetzen

  • wie stelle ich das display auf deutsche schrift ein Eingereicht am 29-3-2020 10:05

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Geemarc Amplidect Combi 595 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Geemarc Amplidect Combi 595

Geemarc Amplidect Combi 595 Kurzanleitung - Deutsch - 2 seiten

Geemarc Amplidect Combi 595 Kurzanleitung - Holländisch - 2 seiten

Geemarc Amplidect Combi 595 Kurzanleitung - Französisch - 2 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info