762011
2
Zoom out
Zoom in
Vorherige Seite
1/2
Nächste Seite
4 5 6
9. Unit description
FRONT RIGHT
A1. LED light
A2. SET/MEM button (for adjusting time and radio station storage)
A3. ALARM button (for adjusting the alarm time n alarm type)
A4. RADIO button (for activating the radio function)
A5. SNOOZE button (for activating snooze function, goodnight function or Wake up light function)
LEFT REAR
A6. TONE button (for adjusting the volume and selecting alarm tone)
A7. LIGHT button (for switching on/off the light and adjusting the back light and colour mood light
selecting)
A8. UP/Down button (For adjusting time, alarm and volume)
A9. Aux Input Jack (For connecting the MP3 input)
A10. USB port (for charging a smart phone)
A11. Battery compartment with cover
A12. Shaker Jack (for connecting the shaker)
A13. Reset-Hole (Resetting the device to factory settings)
A14. Switching power adapter (Select UK adaptor)
10. Display description
B1. Time / alarm time or radio frequency
B2. Light symbol
B3. Auto turn off (Good night)
B4. Shaker
B5. Beep Alarm sound
B6. Radio
B7. Seagull sound
B8. Wind sound
B9. Rain forest sound
B10. Frog sound
B11. Bird sound
B12. FM radio frequency
B13. Alarm 1
B14. Alarm 2
B15. Sleep
B16. Radio station memory
11. Operation
NOTE: - All settings will go back to normal time mode after 6 seconds.
You must complete each section completely without stopping
for more than 6 seconds otherwise it will return to the beginning
of the section.
11.1 Setting the time
Shortly press the SET MEM (A2) button, the hour will flash.
12:00
Press the Up (A8) button to set the hour.
12
Press the DOWN (A8) button to set the minute then
00
Press the SET MEM (A2) button, Choose between 12 and 24 hour
format with the UP / DOWN (A8) buttons.
12 hr
Press the SET MEM (A2) button, Choose Snooze time 5 to 30 minutes
at 5 minutes steps (Default is 5 minutes) with the UP / DOWN (A8)
buttons.
ZZ 05
Press the SET MEM (A2) button to exit (Time is set).
12:00
11.2 Setting and turning on/off the alarm
Short press the ALARM (A3) button once, to set Alarm 1 .
Then press and hold the ALARM (A3) button until the alarm tone
sounds. Set the alarm time by pressing UP to set the Hour or DOWN
to set the minutes (A8) button.
Then to change the alarm sound ( the alarm must be on), short press SET
MEM (A2) button until you reach your desired alarm sound. The
alarm sound will be displayed on the screen.
The bird, frog, rain forest, wind, seagull, radio or beep
It will display a sound.
and then short press ALARM
(A3) twice.
- If you want the shaker to vibrate when the alarm is activated then plug it in
at the back of the clock in (A12)-
NOTE: If you want to stop the alarm when it is ringing, short press the
ALARM (A3) button
If you do not want the alarm to ring (turn it off completely) then short press
the ALARM (A3) button and then press and hold the ALARM
(A3) until the alarm off is displayed on the screen.
OFF
If you want to activate Alarm 2 then repeat the above procedure but short press
ALARM (A3) twice.
11.3 Setting the light to wake you up
Press and hold SNOOZE (A5) button until the is shown in the
display.
Press the UP or DOWN (A8) button to set the wake up light to OFF,15
or 30 or minutes.
The wake up light will gradually brighten before the alarm goes off.
11.4 Alarm Tone
Press the TONE (A6) button when the clock is in normal time mode.
Press the UP or DOWN (A8) button to set the tone to one of the 10
possible tone levels.
F05
11.5 Alarm Volume
Press the UP or DOWN (A8) button at normal Time mode for setting the
volume of alarm.
Default volume is U08 and maximum level is U20.
U08
11.6 Connecting Shaker Vibrator
Connect shaker vibrator at rear jack (A12).
11.7 Light Function
Shortly press the LIGHT (A7) button in normal Time mode.
The lamp will light up.
Press the UP or DOWN (A8) button adjusting the light brightness.
The default intensity L07 shown and the max brightness is L15.
L07
Press the LIGHT (A7) button again.
To switch OFF the light.
11.8 Radio Function
Press the RADIO (A4) button in normal Time mode.
The radio frequency currently set will appear on the display.
Press the UP or DOWN (A8) button to set the desired radio
frequency.
Tip: to start the automatic scan, press and hold the UP or
DOWN (A8) button until the scan start and then release it
again.
Press the TONE (A6) button to set the default Volume:
U06 will show on the display.
Press the UP or DOWN (A8) button to adjust the volume.
The max volume is U12.
U06
11.9 Preset Radio Station / Listening Preset Radio Station
While listening, press and hold the SET MEM (A2) button until S01 shows.
The current radio station is stored in S01.
Select a new radio station and then press and hold the SET MEM (A2)
button until S02 shows.
The new desired radio station is stored in S02.
A maximum of 10 radio stations can be stored. Repeat process to store other
preset stations.
S01
S02
To use a register memory, in mode radio, press the button SET MEM (A2),
S01 is shown or press again to show S02 and TONE (A6) button to valid
S01
S02
11.10 Goodnight function
Have either the light or the radio on and then press and hold the
SNOOZE (A5) button and SLEEP OFFF will be shown on the display.
Press the UP or DOWN (A8) button to select desired switch off time
from 5 minutes to 90 minutes.
You will see the SLEEP icon flashing on the display
SLEEP
OFF
SLEEP
If you want to see how much time remains before the light/radio goes off then
short Press and hold the SNOOZE (A5) button.
11.11 Display Illumination
Press and hold the LIGHT (A7) button until U03 shown at normal time
mode.
Adjusting the display brightness by press the Light button each times.
The brightness changes U03>U04>U01>U02, Max brightness is U04.
U03
11.12 MP3 Playback Function
Press the RADIO (A4) button.
Connect the MP3 to the rear jack (A9) by cable.
AU shown on display.
AU
Press the TONE (A6) button. The default Volume U06 will show on the
display.
Press the UP or DOWN (A8) button for adjusting the volume, and the
max volume is U12.
U06
NOTE: when the audio cable is connected to rear jack (A9), the radio mode is not
available.
11.13 Smart Phone Charger Function
Connect your Smart Phone with USB cable to rear USB socket (A10) to
charge
2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Geemarc Wake and shake Light wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Geemarc Wake and shake Light

Geemarc Wake and shake Light Bedienungsanleitung - Deutsch - 2 seiten

Geemarc Wake and shake Light Bedienungsanleitung - Holländisch - 2 seiten

Geemarc Wake and shake Light Bedienungsanleitung - Französisch - 2 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info