Bedienungsanleitung Gemini 7060 (Seite 3 von 9) (Englisch)

479837

Zoom out

Zoom in

Vorherige Seite

1/9

Nächste Seite

Recapitulatory table of the programmable functions through the two -channels transmitter.

Function Manufacturer function Programmable function

Additional siren outlet Continuous sound Alternate sound

Acoustic signalling De-activated Activated

Boot opening with alarm disarmed De-activated Activated

Boot opening with alarm armed

With alarm disarmed if the 3

functions has been activated

Both functions

(Panic excluded)

Vehicle’s check De-activated Activated

Central door locking short period 0,5 seconds 1 second

Automatic arming Activated De-activated

Comfort While closing the doors After the blinker flashing

WORKING DESCRIPTION

- ALARM ARMING: press on the transmitter’s button N. 1. One pulse of the direction indicator lights signals

the arming.

- EXCLUSION OF THE VOLUMETRIC SENSOR, EXTERNAL SENSORS AND COMFORT CONTROL

AFTER THE ALARM ARMING: while alarm armed (even if the boot opening function with alarm armed is

activated), during the inhibit time (Led lightning fix) press on the transmitter 2 button. The exclusion is

signalled by one pulse of the direction indicator lights, the comfort function and the sensors are excluded.

This function de-activates at the first arming of the alarm.

- ALARM DISARMING: press on the transmitter’s button N. 1.

The disarming is signalled through 3 pulses of the direction indicator lights or 5 pulses if an alarm condition

has occurred.

SPECIAL FUNCTIONS

SELF-LEARNING OF THE CODE OF A NEW TRANSMITTER.

The self-learning of a new transmitter can be obtained with two different ways:

1. While alarm disarmed set the dip switch N.3 to ON and turn the ignition key to ON. The Led and the direction

indicator lights activate. Turning the ignition key to OFF the Led and the direction indicator lights switch off.

Press on the new transmitter button N. 1 within 8 seconds.

For each new code it is necessary to turn the ignition key to ON for one second and then to OFF.

At the end of the self-learning operation set the dip switch N.3 to OFF.

2. While alarm disarmed, open the driver’s door, turn the ignition key to ON and press on the coded transmitter

button N. 2. The Led and the direction indicator lights activate. Turning the ignition key to OFF the Led and

the direction indicator lights switch off. Press on the new transmitter’ s button N. 2 within 10 seconds.

For each new code it is necessary to turn the ignition key to ON for one second and then to OFF.

At the end of the self-learning operation, after 10 seconds the system works normally.

NOTE: the system is supplied with a maximum number of 3 transmitters.

AUTOMATIC ARMING

To obtain this function set the dip switch N. 2 to ON. 60 seconds after the disarming of the alarm, if the doors

and the boot are not opened and the ignition key is not turned to ON, the system will arm with or without closing

the vehicles doors (according to setting of the set-up 7 function).

REMOTE CONTROLLED BOOT OPENING.

The alarm unit 7060 allows opening the vehicle boot if the control is electric to negative. To obtain this function

select the set-up 3 function and press on the transmitter button N. 2 with the alarm disarmed.

If the boot opening is carried out pressing on the transmitter 2 button with the alarm armed (after selecting the

set-up 4 function), the panic function will de-activate and all the inlets inhibit for 60 seconds. If the boot is not

closed within this delay time the alarm will trigger. The opening of the boot through the transmitter is signalled

by one pulse of the direction indicator lights.

PANIC FUNCTION

To obtain this function with the alarm armed after the neutral time, press on the transmitter button N. 2 (if the 4

function- boot opening with alarm armed is de-activated). The siren, the klaxon and the direction indicator lights

activate. To de-activate this function within the 10 seconds of the alarm cycle, press on the transmitter button

N. 2.

LEDS MEMORY.

While disarming the alarm, turn the ignition key to ON to check if an attempted break-in has occurred.

Following the Led flashing it is possible to know the alarm triggering’s cause. The signalisation is repeated for

5 times.

Signalling LED Alarm triggering Alarm cycle

¬¬l¬¬ Door and boot/bonnet pin switches. 10

¬¬¬l¬¬¬ Ignition live Unlimited

¬¬¬¬l¬¬¬¬ External sensors 10

l LED OFF (2 seconds) ¬ LED ON (1 second)

Each alarm cycle is 30 seconds

The inhibit time is 30 seconds for all alarm triggering’s cause.

TRANSMITTERS BATTERY DISCHARGING

The discharging of the battery is signalled through the LED of the

transmitter. If the LED flashes while pressing one of the transmitter’s

buttons it is necessary to replace the batteries.

BATTERIES: CR1616

Note: put the batteries in the appropriate container.

TECHNICAL DATA

Power supply 10.5-14.5 V dc.

Working temperature -40° C + 85°C

Max. Current drawn alarm OFF 15 mA (with self-powered siren connected)

Transmitters frequency 433.92 MHz

Direction indicator lights relay contact capability 8A dc

Engine immobilisation relay contact capability 8A dc

Outlet horn relay contact capability 8A dc

Central door locking relay contact capability 8A dc

GEMINI 7147

DESCRIPTION.

GEMINI 7147 is 2 wires, high power electronic siren designed to be installed quickly and simply in the engine compartment.

WIRING CONNECTIONS (for the installer)

Disconnect the negative terminal of the battery and only re-connect after the installation is complete.

WIRE COLOUR FUNCTION

RED é Battery positive terminal (12V)

BLACK é To the alarm YELLOW -BLACK wire.

NOTE: connect the BLACK wire of the unit to earth.

INSTALLATION.

Install the siren in the engine compartment using the bracket and the screws supplied with the kit. Install the siren away from

areas of intense heat and turn to low the siren ear trumpet to avoid water infiltration.

Protect the wires from water and humidity and to avoid any damaging do not steam clean directly to the siren.

Gemini 7060 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info