Bedienungsanleitung Gemini 7090 (Seite 2 von 9) (Englisch)

479874

Zoom out

Zoom in

Vorherige Seite

1/9

Nächste Seite

DESCRIPTION

GEMINI 7090

The system 7090 is an alarm system with sensors, which can be installed on cars with 12 volts battery (negative earth).

FUNCTIONS

- Remote controlled modular alarm with dynamic code.

- Blinker, universal central door locking control, electric windows and sunroof closure for selected vehicles

equipped with “Pack Comfort” system.

- Perimetric and volumetric protection.

- Controls for self-powered and additional siren (continuous or alternate sound).

- LED’s Memory, acoustic arming and disarming (through siren or horn).

- Remote controlled panic function and/or boot opening.

- Electric engine immobilisation.

- Alarm unit functions programmable through the transmitter.

The unit is equipped with two 2-channel transmitters (art. 7208E, frequency 433.92 Mhz) and two electronic keys

(CDE2).

Gemini 7090W

The system 7090W has the same functions of the 7090 but without the electronic keys and the receptacle.

USEFUL SUGGESTIONS FOR THE INSTALLATION

- Connect the positive and negative feeding wire of the alarm system to the battery.

- Connect always the alarm Green-Brown wire to the door pin switch.

- On catalysed vehicles the engine immobilisation must be carried out on the fuel pump and the starter motor.

- Avoid routing connection wires next to interference sources.

- The ultrasonic heads must be positioned at the top of each windscreen pillar and must be pointing at each

opposite diagonal corner away from the facia outlets.

WIRING CONNECTIONS

Disconnect the negative terminal of the battery and only re-connect after the installation is complete.

FUNCTION WIRE COLOR

Earth ðð BROWN

Battery positive terminal ðð RED

Engine immobilisation (max. 10 A) ðð 2 X GREY

Ignition live ðð YELLOW

Direction indicator lights ðð 2 x ORANGE

Door pin switch ðð GREEN-BROWN

Boot/bonnet pin switches ðð GREEN

Positive alarm armed ðð PINK

External sensors inlet ðð GREEN-BLACK

Self-powered siren control ðð BLUE

Additional siren negative control or klaxon ðð YELLOW-BLACK

Comfort positive ðð RED-BLACK

Comfort negative ðð WHITE-BLACK

Central door locking ðð

YELLOW-BLUE, RED-BLUE, YELLOW-GREY,

RED-GREY, YELLOW-BROWN, RED-BROWN

Note: The wiring harness has 3 connectors: connect the two 2-pin connectors to the receptacle of the

electronic key (art. 2390) and the connector with the thermal yellow sheath to the immobiliser. In the

7090W there are two connectors. One 2-pin connector to connect to the LED, the connector with the

thermal Yellow sheath to an immobiliser.

Table of programmable functions through the two-channels transmitter.

ACTIONS ALARM CONDITION VISIBLE

ACTIONS

LED FLASHING AND

SELECTED FUNCTIONS

ALTERNATIV

EACTIONS

POWER OFF Alarm OFF - - -

Turn the ignition

key to ON

Alarm OFF

FEED THE UNIT

7090

Alarm ON - - -

Push on the

transmitter 1 button

within 10 seconds

Access to the Set-up 1

function: Supplementary siren

One blinker

flashing

One flashing = continuous

Two flashing = intermittent

Push on the

transmitter 1 button

Access to the Set-up 2

function : acoustic signalling

with supplementary siren

Two blinker

flashing

One flashing = de-activated

Two flashing = activated

Push on the

transmitter 1 button

Access to the Set-up 3

function: Panic and additional

siren or boot opening through

the transmitter

Three blinker

flashing

One flashing = Panic and

additional siren

Two flashing = Boot opening

Push on the

transmitter 1 button

Access to the Set-up 4

function: boot opening while

alarm armed

Four blinker

flashing

One flashing =

While alarm disarmed

Two flashing =

For both functions

Push on the

transmitter 1 button

Access to the Set-up 5

function: vehicle check while

arming the system

Five blinker

flashing

One flashing = de-activated

Two flashing = activated

Push on the

transmitter 1 button

Access to the Set-up 6

function: closure control period

Six blinker

flashing

One flashing = 0,5 seconds

Two flashing = 6 seconds

Push on the

transmitter 1 button

Set-up function 7 function:

Passive arming

Seven blinker

flashing

One flashing = de-activated

Two flashing = activated

Push on the

transmitter 1 button

Set-up 8 functi voltage drop

sensor

Eight blinker

flashing

One flashing = de-activated

Two flashing = activated

Press the

transmitter 2

button to

change the

selected

option.

De-activate

+15 to

memorise the

selected

options and to

exit from User

set-up.

Turn the ignition

key to OFF

Set-up exit, normal working

of the alarm

- - -

Recapitulatory table of the programmable functions through the

two-channels transmitter.

Function Manufacturer

function

Programmable

function

1 Additional siren outlet Continuous sound Alternate sound

2 Acoustic signalling De -activated Activated

3 Boot opening with alarm disarmed De -activated Activated

4 Boot opening with alarm armed De -activated Activated

5 Vehicle’s check De -activated Activated

6 Central door locking period 0,5 seconds 6 seconds

7 Passive arming De -activated Activated

8 Voltage drop sensor De -activated Activated

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gemini 7090 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info