Bedienungsanleitung Gemini cdm-3600 (Seite 5 von 23) (Deutsch, Englisch, Französisch, Spanisch)

161525

Zoom out

Zoom in

Vorherige Seite

1/23

Nächste Seite

JOG WHEEL:In SEARCHMODEthe JOGWHEEL can be used to

search forward or bacwards in the music track, as well as for fine

adjustments to a CUEpoint in PAUSEmode. In PITCHBENDmodethe

JOGWHEELwillfunction the same as the PITCHBENDallowing you

to speed up (FORWARD) or slow down (REWIND) the music clock-

wise bieng (FORWARD) and counter clockwise being (REWIND).

JOGMODEBUTTON: When the JOGMODEBUTTONis illuminated

it indicates the the JOGWHEELis in SEARCH MODE, and when not

illuminated it indicates that the JOGWHEELis in PITCHBEND

MODE.

DISPLAY: The DISPLAY shows the track number, pitch value, pitch

bend, single, continue (for continuous play), play/pause modes, fast

forward/reverse modes, loop mode, reloop mode, PGM, repeat

modes, the playback display bar, and three diffirent time displays.

These times displays are TIMEELAPSED on the track, TIMEREMAIN-

ING on the disc and and TIMEREMAINING on the track. Time is

measured in minutes, seconds andframes.

PGM: Allows you to create a set playlist. To program a set list into

the CDM-3600 memory, begin by stopping the unit from play and

pressing PGM to begin the set list. Select a track by using the track

selection button to scan to the first track to be placed in the set list.

When you have selected the proper track press PGM and the

CDM-3600 will be ready to set your next selection. Repeat the pre-

vious steps until you have completed your playlist, then press play to

begin the set list.

REPEAT: Press the repeat button once to engage ( 1)or repeatthe

selected track. Press REPEAT again to engage ALLsetting wich will

repeat all the tracks on the CD. Press REPEAT again to disengage

the repeat function.

SINGLE: Pressing the SINGLEbutton engages SINGLEmode, in this

mode the CDM-3600 will play one song and then stop. Pressing the

SINGLE button again will thenactivateCONTINUOUSmodecausing

the unit to play continuously (after the last track, the unit will return

to the first track of the disc andcontinue to play).

TIME: The TIMEBUTTON switches the time display between three

available sources, these three are TIMEELAPSED on the track, TIME

REMAINING on the disc and and TIMEREMAINING on the track.

TIMEELAPSEDindicates how much time has currently gone by since

the play button was pressed, TIME REMAING ONDISCwillcount

down the time remaining on the entire disc and TIMEREMAINING

ON TRACK counts down the time that is left before the end of the

track.

PITCH:Pushing the PITCH button (the button will light up blue) acti-

vates the PITCHCONTROLSLIDE. Thepitch or speed of the CDwill

change plus or minus 12% depending on the position of the PITCH

CONTROLSLIDER. Push the PITCHbutton again to deactivate this

mode.

PITCHCONTROL SLIDE: Movingthe PITCHCONTROL SLIDE

up ordown will lower or raise thepitch percentage+or - 12%.

PITCHBEND:Pushing thePITCHBENDBUTTONS will automatically

raise thepitch up to +16% or lower thepitch down to -16%from the

existing pitch setting.Releasing thebuttons will return the pitch

to theoriginal pitch setting. You can use thisfunction tomatch the

beat when mixing from onesongto another.

CDM-3600

PLAYER FUNCTIONS: (CONTINUED)

LOOPSECTION: ALOOP repeatsthesection between the entry point

(IN) and the exitpoint(OUT). To set aloop while the unit isplaying,

start by pressing the INBUTTON(it will light up)and when you reach

the desiredend loop point press the OUTBUTTON(it willalsolight

up). The loop will continue playing until you pressthe OUTBUTTON

again allowingthe musicto continue from that point on, to re-engage

the loop you must pressthe RELOOPBUTTON. Whenyou have re-

leasedyour loop theOUTBUTTON willturn OFFand the INBUT-

TONwill remainlit toindicate that your loopis stored inthe

CDM-3600 memory. Pressingthe INBUTTONagain while the unit is

playingwill erasethe previously saved loopwhile saving your new

loop entry point.PressOUTto exitthe loop and save a new complete

loop.

PressRELOOP toreturn tothe beginning of the previously saved loop

from normalplay. Press RELOOPrepeatedly tocausethe loop to

stutter.

NOTE:THEFIRSTLOOP WILLHAVEAPAUSEAT THEEXITPOINT,

WHILEALL OTHERSWILLBESEAMLESS.

PLAY/PAUSE: Each pressof the PLAY/PAUSE BUTTON

causesthe operation to changefrom PLAYto PAUSEor from PAUSE

back to PLAY. ThePLAY/PAUSEBUTTONremains litwhenin PLAY

mode, while it blinks inPAUSEmode.

CUE: While the unit isplayingand after the cuepointhas been

programmed,pressing CUEwillcausethe CD player to enter the

PAUSEmode(PLAY/PAUSEBUTTONblinks) atthe programmed cue

point(the CUELEDislit).Holding down the CUE button

changes the function to preview , and allows you to stutter start or

play fromthe programmedCUEPOINT Releasing the CUE button

will return theCDtothe presetCUE point.

STOPBUTTON: When pressedthe STOPBUTTONstops the play-

back of the CDplayer.

TRACK SELECTION: TheTRACKSELECTION buttons let you select the

track toplay. +10allowsyou to scan through the track selection inin-

crements of 10.TRACKSKIPallows you to scan through each track

one atatime.

NOTE:ONCEYOUHAVESKIPPEDTOANOTHERTRACK,YOU MAYNOTGOBACK

TOYOURPROGRAMMEDCUEPOINT. YOUMUSTBEGIN YOURCUESELECTION

OVERAGAIN,THECUEWILL BEPRESETTOTHEBEGINNINGOFTHENEWLEYSE-

LECTEDTRACK.

DIRECTACCESSBUTTONS:The direct access buttonsallow you to

inputatrack numberdirectly instead of having toskipthroughthe

tracks individualy. Just press thenumber or combination of numbers

up to99 and theplayer will jump to that track instantly.

MIXER SECTION:

CHANNELINPUT SELECTOR: TheCHANNEL INPUT SELECTOR switches

allowyou to choose which inputwill becontrolled by thatchannels correspon-

ding volume FADER. For example CHANNEL(1) INPUTSELECTORallows

youto choose between line(1) (Thatsides internal CDplayer), line(2) which

is lineinput RCA (1) andor PHONO(1) (if theCONVERTIBLELINESWITCH is

switched to PHONO) seeabove. Thesame appliesfor channel 2.

CHANNELROTARYGAIN: TheCHANNEL ROTARYGAIN allows you to

boost thesignal of each individualchannel depending on how low or high

its inputlevel is.

Downloaded from www.Manualslib.com manuals search engine

Gemini cdm-3600 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info