Zoom out
Zoom in
Vorherige Seite
1/24
Nächste Seite
1
Gigaset A415 / ZAF / A31008-M2501-W101-1-7619 / Penguini.fm / 09.07.2013
Template Bali, Version 1, 16.02.2012
Gigaset A415/AS405
The handset at a glance
1 Charge status of the
batteries
2 Signal strength
3Display keys
4 End call key and On/Off key
5 Talk key/Handsfree key
6 Control key (
p)
ª Audio settings
INT Internal call
â
Directory
|
Muting during a call
7 Key 1
network mailbox
8 Star key
Ringers on/off (press and hold);
with an open connection:
switch from pulse dialling to
tone dialling (press briefly)
9 Key 0/recall key
Consultation call (flash): press
and hold
10 Hash key
Keypad lock on/off (press and
hold); toggles between upper/
lower case and digits; inserts a
dialling pause (press and hold)
11 Microphone
Handset display keys:
Pressing a key launches the function
that appears above that key in the dis-
play.
Please note
New messages in the calls list/net-
work mailbox list are indicated in
the display by the message New
messages, the left display key
flashes (if set
¢ page 8).
Display Function when pressed
Open calls list (¢ page 8).
§Menu§
Open main/submenu
(see menu overview
¢ page 18).
Go back one menu level.
Y
Scroll up/down or adjust vol-
ume with
q
.
X
Move cursor to left/right
with
r.
Ü
Backspace deletes one
character at a time.
§OK§
Confirm menu function or
save entry.
Ð
U
INT 1
23.04. 10:53
Menu
The base station at a glance
Registration/paging key:
Search for handsets (press
briefly, paging
¢ page 9)
Register handsets (press and
hold
¢ page 9).
ECO DECT
During a call, the transmission power is automatically adjusted to the distance
between handset and base station, the smaller the distance, the lower the
transmission power (radiation). In idle status the transmission power of the
handset is switched off. Only the base station ensures contact with the hand-
set using low radio signals.
Your phone offers you the opportunity to further reduce the transmission
power:
1) Reducing transmission power (eco mode)
If the setting Max. Range is switched to off (menu tree
¢ page 18), the trans-
mission power in standby mode and during a call is reduced up to 80% at half
range.
2) Deactivating transmission power (eco mode+)
With the setting No Radiation (menu tree
¢ page 18), you turn off the trans-
mission power of the base station in standby mode completely. Please note:
All registered handsets must support this feature.
For quick connection of incoming calls the handset repeatedly switches
to reception mode for short periods. This increases energy consumption
and therefore reduces the standby and talk times.
1
2
3
4
5
6
7
8
9
10
11
1

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Forum

Suche zurücksetzen

  • Was ist das Piktogramm (tannenbaum) in der oberen Zeile im Display gigaset a415 Eingereicht am 10-8-2022 10:27

    Antworten Frage melden
  • Was ist das Piktogramm (tannenbaum) in der oberen Zeile im Display Eingereicht am 10-8-2022 10:26

    Antworten Frage melden
  • guten Tag
    mein Router steht im Keller/UG - kann ich die Basisstation vom 415Duo über das Haus-eather-net betreiben? also das Signal ab Router über Eathernet-Leitung ins OG um das Handset dort nutzen zu können?
    besten Dank für ihre Unterstützung.und mit freundlichen Grüsse
    Max Rechsteiner/079 279 90 70 Eingereicht am 6-8-2022 22:16

    Antworten Frage melden
  • Wie kann ich eine aufgesprochene Ansage auf dem Antwortbeantworter löschen Eingereicht am 17-7-2022 22:42

    Antworten Frage melden
  • Kann das Licht immer an sein oder geht das immer aus. Muss man das einstellen? Eingereicht am 10-7-2022 11:27

    Antworten Frage melden
  • microphon ausgestellt - wie wird das wieder eingestellt ? Eingereicht am 4-7-2022 19:02

    Antworten Frage melden
  • Die rote auflegetaste funktioniert nach einem eingehenden Anruf nicht Eingereicht am 1-7-2022 20:27

    Antworten Frage melden
  • Mein Telefon reagiert auf kein Anruf und kann auch niemanden anrufen woran liegt es ?
    Mein Basis ist an liegt es vielleicht daran ? Eingereicht am 27-6-2022 17:11

    Antworten Frage melden
  • ich kann nicht hören,wenn ich angerufen werde.meine kleine hat rumgespielt-es klingelt nicht Eingereicht am 12-6-2022 20:04

    Antworten Frage melden
  • Gigaset a415 zeigt an " Anrufbeantw. voll!" wie kann er geleeert werden?
    Eingereicht am 7-6-2022 07:56

    Antworten Frage melden
  • es werden nur entgangene anrufe gespeichert. wie kann man alle anrufe speichern Eingereicht am 6-6-2022 17:16

    Antworten Frage melden
  • wie verbinde ich das telnin mit dem router der von vodafon Eingereicht am 4-6-2022 18:17

    Antworten Frage melden
  • Gigaset A415 wo ist die
    basistaste zum drücken nach Paginruf Eingereicht am 29-5-2022 10:14

    Antworten Frage melden
  • Anrufbeantworter .
    wie richte ich Eigentext ein ? Eingereicht am 26-5-2022 12:44

    Antworten Frage melden
  • können einzelne eingehende Anrufe gesperrt werden?
    Eingereicht am 24-5-2022 09:02

    Antworten Frage melden
  • Was bedeutet die Fehlermeldung beim Anmelden "nicht registriert" Eingereicht am 22-5-2022 09:50

    Antworten Frage melden

Inhalt der Seiten


  • Page 1

    Gigaset A415 / ZAF / A31008-M2501-W101-1-7619 / Penguini.fm / 09.07.2013

    1

    Gigaset A415/AS405
    Please note

    The handset at a glance
    1 Charge status of the
    batteries
    2 Signal strength
    3 Display keys
    4 End call key and On/Off key
    5 Talk key/Handsfree key
    6 Control key (p)
    ª Audio settings
    INT Internal call
    â Directory
    | Muting during a call
    7 Key 1
    network mailbox
    8 Star key
    Ringers on/off (press and hold);
    with an open connection:
    switch from pulse dialling to
    tone dialling (press briefly)
    9 Key 0/recall key
    Consultation call (flash): press
    and hold
    10 Hash key
    Keypad lock on/off (press and
    hold); toggles between upper/
    lower case and digits; inserts a
    dialling pause (press and hold)
    11 Microphone

    The base station at a glance

    New messages in the calls list/network mailbox list are indicated in
    the display by the message New
    messages, the left display key
    flashes (if set ¢ page 8).

    1
    2

    Ð

    U

    INT 1
    23.04. 10:53
    ‘ Menu

    Handset display keys:
    Pressing a key launches the function
    that appears above that key in the display.
    Display Function when pressed

    ’ Open calls list (¢ page 8).
    §Menu§ Open main/submenu

    3
    4
    5
    6
    7


    Y
    X
    Ü
    §OK§

    8
    9
    10
    11

    (see menu overview
    ¢ page 18).
    Go back one menu level.
    Scroll up/down or adjust volume with q.
    Move cursor to left/right
    with r.
    Backspace deletes one
    character at a time.
    Confirm menu function or
    save entry.

    ECO DECT

    Template Bali, Version 1, 16.02.2012

    During a call, the transmission power is automatically adjusted to the distance
    between handset and base station, the smaller the distance, the lower the
    transmission power (radiation). In idle status the transmission power of the
    handset is switched off. Only the base station ensures contact with the handset using low radio signals.
    Your phone offers you the opportunity to further reduce the transmission
    power:

    Registration/paging key:
    Search for handsets (press
    briefly, paging ¢ page 9)
    Register handsets (press and
    hold ¢ page 9).

    1) Reducing transmission power (eco mode)
    If the setting Max. Range is switched to off (menu tree ¢ page 18), the transmission power in standby mode and during a call is reduced up to 80% at half
    range.
    2) Deactivating transmission power (eco mode+)
    With the setting No Radiation (menu tree ¢ page 18), you turn off the transmission power of the base station in standby mode completely. Please note:
    ◆ All registered handsets must support this feature.
    ◆ For quick connection of incoming calls the handset repeatedly switches
    to reception mode for short periods. This increases energy consumption
    and therefore reduces the standby and talk times.



  • Page 2

    Gigaset A415 / ZAF / A31008-M2501-W101-1-7619 / Penguini.fm / 09.07.2013

    2

    Safety precautions
    Warning
    Read the safety precautions and the user guide before use.
    Explain their content and the potential hazards associated with using the device to your children.
    Use only the power adapter indicated on the device.

    Use only rechargeable batteries that correspond to the specification (see "Technical data"). Never use a
    conventional (non-rechargeable) battery or other battery types as this could result in significant health
    risks and personal injury. Rechargeable batteries, which are noticeably damaged, must be replaced.
    Using your telephone may affect nearby medical equipment. Be aware of the technical conditions in your
    particular environment, e.g. doctor's surgery.
    If you use a medical device (e.g. a pacemaker), please contact the device manufacturer. They will be able
    to advise you regarding the susceptibility of the device to external sources of high frequency energy (for
    the specifications of your Gigaset product see "Technical data").
    Do not hold the rear of the handset to your ear when it is ringing or when speaker mode is activated. Otherwise you risk serious and permanent damage to your hearing. Your Gigaset is compatible with the
    majority of digital hearing aids on the market. However, perfect function with all hearing aids cannot be
    guaranteed. The phone may cause interference in analogue hearing aids (humming or whistling) or cause
    them to overload. If you require assistance, please contact the hearing aid supplier.
    The devices are not splashproof. For this reason do not install them in a damp environment such as bathrooms or shower rooms.
    Do not use the devices in environments with a potential explosion hazard (e.g. paint shops).

    If you give your Gigaset to a third party, make sure you also give them the user guide.

    Remove faulty devices from use or have them repaired by our Service team, as these could interfere with
    other wireless services.
    Please note

    Template Bali, Version 1, 16.02.2012

    ◆ The device cannot be used in the event of a power failure. It is also not possible to transmit emergency calls.
    ◆ Emergency numbers cannot be dialled if the keypad lock is activated!



  • Page 3

    Gigaset A415 / ZAF / A31008-M2501-W101-1-7619 / Penguini.fm / 09.07.2013

    3

    First steps
    Check the package contents
    Base station and handset package: One Gigaset handset, one Gigaset A415/AS405 base station, one mains adapter,
    one phone cord, two batteries, one battery cover, one user guide.
    Handset and charging cradle package: One Gigaset handset, one charging cradle with mains adapter, two batteries,
    one battery cover, one user guide.
    If you have purchased a model with multiple handsets, the package should contain two batteries, a battery cover and
    a charging cradle with mains adapter for each additional handset.

    Setting up the base station and charging cradle (if included)
    The base station and charging cradle are designed for use in enclosed dry rooms with a temperature range of +5 °C to
    +45 °C.
    ¤ Set up the base station at a central location on a flat, non-slip surface in your house or apartment. You can also
    mount the base station and charging cradle on the wall.
    Please note
    Pay attention to the range of the base station. This is up to 300 m in unobstructed outdoor areas and up to 50 m
    inside buildings.
    The phone's feet do not usually leave any marks on surfaces. However, due to the multitude of different varnishes and
    polishes used on today's furnishings, the occurrence of marks on the surfaces cannot be completely ruled out.
    Care: Wipe down the base station, the charging cradle and the handset with a damp cloth (no solvents) or an antistatic
    cloth. Never use a dry cloth. This can cause static.
    Please note:
    ◆ Never expose the telephone to the influence of heat sources, direct sunlight or other electrical devices.
    ◆ Protect your Gigaset from moisture, dust, corrosive liquids and vapours.

    Connecting the base station

    ¤ First connect the mains adapter 1.
    ¤ Then connect the telephone jack 2 and insert the
    cables into the cable ducts.

    Please note:
    ◆ The mains adapter must always be connected, as the
    phone will not operate without mains connection.
    ◆ Only use the mains adapter and phone cord supplied.
    Pin connections on telephone cables can vary.

    1
    1
    2
    1

    Connecting the charging cradle (if included)
    2

    Template Bali, Version 1, 16.02.2012

    1

    ¤ Connect the flat plug from the power
    supply 1.
    ¤ Plug the mains adapter into the plug
    socket 2.
    4
    If you need to disconnect the plug from the
    charging cradle, press the release button 3
    and disconnect the plug 4.

    3



  • Page 4

    Gigaset A415 / ZAF / A31008-M2501-W101-1-7619 / Penguini.fm / 09.07.2013

    4
    Setting up the handset for use
    The display is protected by a plastic film. Please remove the protective film!

    Inserting the batteries and closing the battery cover
    Warning
    Use only the rechargeable batteries recommended by Gigaset Communications GmbH (¢ page 14), i.e., never use
    conventional (non-rechargeable) batteries as this could result in significant health risks and personal injury. For
    example, the batteries could explode. The phone could also malfunction or be damaged as a result of using batteries that are not of the recommended type.

    ¤ Insert the batteries

    with the polarity in the
    correct direction.
    The polarity is indicated in
    the battery compartment.

    ¤ Insert the battery cover from
    the top.
    ¤ Then slide the cover upwards
    until it clicks into place.

    To open the battery cover, for instance to
    replace the batteries:
    ¤ Reach into the notch at the top of the
    cover and slide the cover downwards.

    Initial charging and discharging of the batteries
    The correct charge status can only be displayed if the batteries are first fully charged and discharged.

    6h

    ¤ Charge the handset in the base station/charging cradle
    for 6 hours.
    Please note
    The handset must only be placed in the designated
    Gigaset base station or charging cradle.

    ¤ After charging, remove the handset from the base sta-

    tion/charging cradle and only replace it when the batteries are fully discharged.

    Template Bali, Version 1, 16.02.2012

    Please note

    ◆ Base station and handset package: The handset is pre-registered with the base station. If you have purchased






    a model with multiple handsets, all handsets will already be registered with the base station. You do not need
    to register the handset again.
    However, if a handset is not registered with the base station (Register HS or Put into base is displayed), please
    register the handset manually (¢ page 9).
    Handset and charging cradle package: please register the handset manually (¢ page 9).
    After the first battery charge and discharge, you may place your handset in the charger after every call.
    Always repeat the charging and discharging procedure if you remove the batteries from the handset and reinsert them.
    The batteries may warm up during charging. This is not dangerous.
    After a while, the charge capacity of the batteries will decrease for technical reasons.



  • Page 5

    Gigaset A415 / ZAF / A31008-M2501-W101-1-7619 / Penguini.fm / 09.07.2013

    5
    Changing the display language
    Change the display language if you do not understand the language currently set:
    §Menu§ ¤ 421 (press the keys one after the other) ¤ q (select language) ¤ §OK§ (‰ = current language)
    ¤ Press and hold the end call key a to return to idle status.

    Setting the date and time
    Set the date and time so that the correct date and time can be assigned to incoming calls, and so that the alarm can be
    used.
    §Menu§ ¤ q Settings ¤ §OK§ ¤ Date/Time ¤ §OK§ ¤ Date ¤ ~ (enter the day, month and year in 6-digit format)
    ¤ §OK§ ¤ Time ¤ ~ (enter hours and minutes in 4-digit format) ¤ §OK§ (display message: Saved)
    ¤ a (press and hold to return to idle status).
    You can move the position of an entry to the left or right by pressing the control key left or right r.
    Please note
    If your phone receives the date and time during calling line display (e.g., via your network provider, a router or
    PABXs), you can specify whether this data should be copied to your phone:
    ¤ Press the key sequence: §Menu§ ¤ P#Q5#MI
    973 SET: [0]
    The following is displayed; the current setting flashes:
    ¤ Press one of the following keys to specify, when this data should be copied to your phone:
    Q
    Never
    Once, in case the date/time is not set on your phone
    or 1
    or 2
    Always
    Your selection is displayed (e.g., 2):
    973 SET: [2]
    ¤ Press the display key §OK§.

    Display in idle status
    Once the phone is registered and the time set, the idle status is shown as in this example.
    Screen display
    ◆ Reception between the base station and the handset:
    - Good to poor: Ð ¨ § ¦
    - No reception: ¥
    ◆ Battery charge status:
    - U Charged over 66%
    - V Charged between 34% and 66%
    - e Charged between 11% and 33%
    - = Charged less than 11%
    - = Flashes: batteries almost empty (less than 10 minutes talktime)
    = e V U Batteries are charging
    If No Radiation mode (¢ page 18) is activated, the ½ icon is displayed in the top left.

    Ð

    U

    INT 1
    23.04. 10:53


    Menu

    Activating/deactivating the handset

    Template Bali, Version 1, 16.02.2012

    Press and hold the a key to activate or deactivate the handset. If you place a deactivated handset in the base station
    or charging cradle, it will automatically activate after approx. 30 seconds.
    Your phone is now ready for use.
    If you have any questions about using your phone, please read the tips on troubleshooting ("Questions and answers",
    ¢ page 15) or contact our Customer Care team ¢ page 16.



  • Page 6

    Gigaset A415 / ZAF / A31008-M2501-W101-1-7619 / Penguini.fm / 09.07.2013

    6
    Menu guidance

    Your telephone's functions are accessed via a menu consisting of several levels (menu overview ¢ page 18).

    Main menu (first menu level)
    ¤ When the handset is in idle status, press the display key §Menu§ or right on the control key v to open the main menu.
    The functions in the main menu are shown by means of an icon and the function's name.

    Selecting a function:
    ¤ You can scroll between functions using the control key q. The function is shown in the display.
    ¤ Press the display key §OK§ or the right control key vto select the displayed function. This opens the corresponding
    submenu and the first entry is displayed.
    If you press the display key ” or briefly the end call key a, the display returns to idle status.

    Submenus
    The functions in the submenu are indicated by name.
    Selecting a function:
    ¤ You can scroll between functions using the control key q. The function is shown in the display.
    ¤ Press the display key §OK§ to select the displayed function. This opens the corresponding submenu and the first entry
    is displayed.
    If you press the display key ” or briefly the end call key a, the display returns to the previous menu level or you cancel
    the operation.
    Any settings you have not confirmed by pressing the display key §OK§ are lost.

    Reverting to idle status
    From any point in the menu:
    ¤ Press and hold the end call key a or
    ¤ Do not press any key: after 2 minutes, the display will automatically revert to idle status.

    Making calls
    Making external calls and ending calls
    External calls are calls using the public telephone network.
    ~ (Enter the phone number) ¤ c.
    The phone number is dialled. (Or you can first press and hold talk key c [dial tone] and then enter the number.) During
    the call you can adjust the earpiece volume using t and set the volume with q.
    End the call/cancel dialling: Press the end call key a.

    Accepting a call
    The handset indicates an incoming call by ringing and by a display on the screen.
    Press the talk key c to accept the call.
    When Auto Answer is activated (see menu overview ¢ page 18), simply remove the handset from the base station/
    charging cradle.

    Template Bali, Version 1, 16.02.2012

    Calling Line Identification
    When you get a call, the caller's number will be displayed on your handset; the caller's name will be displayed if it is
    stored in the directory.
    Prerequisites:
    1 You have asked your network provider for the caller's number (CLIP) to be displayed on your handset screen.
    2 The caller has asked the network provider for his number to be identified (CLI).
    External Call appears in the display if you have not requested CLIP, Withheld appears if the caller has withheld CLI, and
    Unavailable appears if CLI has not been requested.

    Handsfree operation
    In handsfree mode, you activate the loudspeaker so that you can hear the caller without having to hold the handset to
    your ear. During a callyou can activate or deactivate handsfree mode by pressing the handsfree key d.
    During the call in handsfree mode you can adjust the handsfree volume by pressing t and set the volume with q.

    Muting

    You can deactivate your handset's microphone during a call. Press the right control key v to mute the handset. Press
    the control key v again to reactivate the microphone.



  • Page 7

    Gigaset A415 / ZAF / A31008-M2501-W101-1-7619 / Penguini.fm / 09.07.2013

    7

    Using the directory and lists
    Directory

    To open the directory: press control key s.
    You can save up to 100 phone numbers (max. 22 digits) with corresponding names (max. 16 characters).
    Enter letters/characters ¢ page 13.

    Storing the first number in the directory
    s ¤ New Entry? ¤ §OK§ ¤ ~ (enter number) ¤ §OK§ ¤ ~ (enter name) ¤ §OK§
    Storing further numbers in the directory
    s ¤ §Menu§ ¤ New Entry ¤ §OK§ ¤ ~ (enter number) ¤ §OK§ ¤ ~ (enter name) ¤ §OK§
    Selecting a directory entry
    Open the directory with s. You have the following options:
    ◆ Use q to scroll through the entries until the required name is selected.
    ◆ Enter the first character of the name and scroll to the entry with q, if required.
    Dialling with the directory
    s ¤ q (select entry) ¤ c
    Using other functions
    s ¤ q (select entry) ¤ §Menu§
    The following functions can be selected with q:
    New Entry
    Show Number
    Show Name
    Edit Entry
    Use Number
    Delete Entry
    Send Entry
    Delete List
    Send List
    Shortcut

    Save new phone number.
    Display the phone number.
    Display the name.
    Edit selected entry.
    Edit the number or open the directory by pressing the control key s to insert a number from the
    directory at the current position. Then dial or use other functions with §Menu§.
    Delete selected entry.
    Send a single entry to another handset (¢ page 7).
    Delete all directory entries.
    Send the complete list to another handset (¢ page 7).
    For shortcuts, assign the current entry to a key.

    Using shortcut keys
    You can assign directory entries to the keys 2–9:
    s ¤ q (select entry) ¤ §Menu§ ¤ q Shortcut ¤ §OK§
    ¤ q (select key) ¤ §OK§ or ~ (press the key you want to assign the entry to)
    To dial, press and hold the required shortcut key.

    Template Bali, Version 1, 16.02.2012

    Sending the directory to another handset
    Prerequisites:
    ◆ The sending and receiving handsets must both be registered to the same base station.
    ◆ The other handset and the base station can send and receive directory entries.
    s ¤ q (select entry) ¤ §Menu§ ¤ q Send Entry / Send List ¤ §OK§
    ¤ q (Select the internal party) ¤ §OK§ or ¤ ~ (enter the internal number of the receiving handset)

    Last number redial list
    This list contains the ten last dialled numbers.

    Dialling from the last number redial list
    c (press briefly) ¤ q (select entry) ¤ c



  • Page 8

    Gigaset A415 / ZAF / A31008-M2501-W101-1-7619 / Penguini.fm / 09.07.2013

    8
    Managing entries in the last number redial list
    c (press briefly) ¤ q (select entry) ¤ §Menu§
    You can select the following settings:
    Use Number
    Copy to Dir.
    Delete Entry
    Delete List

    Edit the number or open the directory by pressing the control key s to insert a number from the
    directory at the current position. Then dial or use other functions with §Menu§.
    Copy an entry to the directory.
    Delete selected entry.
    Delete all entries.

    Calls list/network mailbox list

    Press the display key ’ , to open the list overview. If you have new messages, only lists with new messages are displayed. Scroll through the lists by pressing q.
    An advisory tone sounds as soon as a new entry appears in the calls list/network mailbox list. By default the left display
    key flashes and the message New messages appears on the display. You can change this behaviour by using the following procedures:
    ¤ Press the key sequence: §Menu§ ¤ P#Q5#M
    The following is displayed:

    97
    ¤ Press one of the following keys to select the message type:
    5
    for missed calls
    or M
    for messages on the network mailbox

    Your selection is displayed (e.g., 5 for missed calls); the current setting flashes:

    975 SET: [0]
    Press key Q or 1, to set the behaviour for new messages:
    Q
    The presence of new messages is displayed (default setting).
    or 1
    The presence of new messages is not displayed.
    Your selection is displayed (e.g., 1):

    975 SET: [1]
    ¤ Press the display key §OK§.
    Settings will only be changed once a new message has been received.
    Please note
    When calls are saved in the network mailbox, you will receive a message if the appropriate settings have been made
    (depending on your network provider).

    Template Bali, Version 1, 16.02.2012

    Calls list

    Prerequisite: CLIP (¢ page 6)
    Depending on the type of list set, the calls list contains (¢ page 18):
    ◆ Answered calls
    ◆ Missed calls
    Depending on the type of list set, all numbers of the last 25 incoming calls are saved or just the missed calls are saved.
    Open the calls list
    ’ ¤ q CallsList
    The calls list is displayed as follows:
    Number of new entries + number of old, read entries CallsList 01+02
    Press §OK§ to open the list.
    The last incoming call is displayed. If necessary, use q to select another entry.



  • Page 9

    Gigaset A415 / ZAF / A31008-M2501-W101-1-7619 / Penguini.fm / 09.07.2013

    9
    Using other functions
    q (select entry) ¤ §Menu§
    The following functions can be selected with q:
    Delete Entry
    Copy to Dir.
    Date/Time
    Status
    Delete List

    Delete current entry.
    Copy an entry to the directory.
    Call date and time (if set).
    New Call: new missed call. Old Call: entry already read.
    Warning! All old and new entries will be deleted.

    Calling back a caller from the calls list
    ’ ¤ q CallsList 01+02 ¤ §OK§ ¤ q (select entry) ¤ c

    Network mailbox list

    You can use these lists to listen to messages on the network mailbox (¢ page 9).
    New messages can only be deleted during playback of message body.

    Network mailbox
    The network mailbox is the answering machine in your provider's telephone network. More information is available from
    your provider. You cannot use the network mailbox unless you have requested it from your provider.
    In order to use the network mailbox quickly and easily via the network mailbox list (¢ page 8), the menu (¢ page 18)
    and to use fast access (¢ page 1), you will need to enter the number in your phone:
    §Menu§ ¤ q Answer Machine ¤ §OK§ ¤ q Net Mailbox ¤ ~ (enter number) ¤ §OK§

    Locating a handset (paging)
    You can locate your handset using the base station.
    ¤ Briefly press the registration/paging key on the base station (¢ page 1).
    All handsets will ring at the same time (paging), even if the ringers are switched off.
    Ending paging: Briefly press the registration/paging key on the base station (¢ page 1) or press the talk key c or the
    end call key a on the handset.

    Registering handsets manually
    You can register up to four handsets on your base station. Each additional handset must be registered on the base station in order for it to work properly!
    1) On the handset
    §Menu§ ¤ q Settings ¤ §OK§ ¤ q Handset ¤ §OK§ ¤ q Register HS ¤ Enter the base station system PIN (default setting: 0000) ¤ §OK§ ¤ Registering is displayed.

    Template Bali, Version 1, 16.02.2012

    2) On the base station
    Within 60 seconds, press and hold the registration/paging key on the base station (¢ page 1) for approx. 3 seconds.
    Registration takes approx. 1 minute. Once the registration process has been completed successfully, the display briefly
    shows HS registered and returns to idle status. Handsets are assigned the lowest available internal number (1-4). If the
    internal numbers 1–4 are already assigned to other devices, the number 4 will be overwritten.

    De-registering handsets
    You can de-register all other registered handsets from each of the registered Gigaset handsets.
    §Menu§ ¤ q Settings ¤ §OK§ ¤ q Handset ¤ §OK§ ¤ q De-register HS ¤ q Select the internal party you wish to deregister. The handset you are currently using is indicated by <. ¤ §OK§ ¤ Enter the base station system PIN (default setting:
    0000) ¤ §OK§



  • Page 10

    Gigaset A415 / ZAF / A31008-M2501-W101-1-7619 / Penguini.fm / 09.07.2013

    10

    Using multiple handsets
    Making internal calls
    Internal calls are free calls to other handsets that are registered to the same base station.

    2 handsets are registered
    Press the control key u, the other handset is called.
    More than 2 handsets are registered
    Calling a specific handset
    u ¤ ~ (1...4, enter internal number of the handset) or
    u ¤ q (Select the internal party) ¤ §OK§ or c ¤ the handset is called.
    Calling all handsets (group call)
    Press and hold u or u ¤ P or u ¤ q Call all ¤ §OK§ or c ¤ all handsets are called.
    When a participant answers you can speak to him. To end the call, press a.

    Internal consultation call/connecting a call

    You are in conversation with an external participant. Press the control key u and call one or all handsets. The external
    participant hears the hold music. When the internal participant answers: Announce the external call, if necessary.
    Either
    press the end call key a. The call is transferred to the internal participant,
    or
    press the display key ” . You are reconnected with the external participant.
    When transferring a call you can also press the end call key a before the internal participant answers.

    Listening in to an external call
    You are conducting an external call. An internal participant can listen in on this call and take part in the conversation
    (conference). Prerequisite: The Listening in function must be activated.

    Activating/deactivating listening in
    §Menu§ ¤ q Settings ¤ §OK§ ¤ q Base ¤ §OK§ ¤ q Listening in ¤ §OK§ (‰ = on)
    Internal listening in (conference)

    You want to listen in to an existing external call. Press and hold the c key. You can listen in to the call. All participants
    hear a signal tone.
    To end: press the end call key a. All participants hear a signal tone.
    If the first internal participant presses the end call key a, the handset that has "listened in" remains connected to the
    external participant.

    Setting the alarm clock
    Activating/deactivating the alarm clock
    §Menu§ ¤ q Alarm Clock ¤ §OK§ ¤ Activation ¤ §OK§ (‰ = on)
    When activated: ¤ ~ (Set the wake-up time) ¤ §OK§

    Template Bali, Version 1, 16.02.2012

    When the alarm clock rings, press any key to switch it off for 24 hours. If the alarm clock is set, the wake-up icon l will
    appear on the screen and the wake-up time will be displayed instead of the date.

    Setting the wake-up time
    §Menu§ ¤ q Alarm Clock ¤ §OK§ ¤ q Wake-upTime ¤ §OK§
    Enter the wake-up time in hours and minutes, then press §OK§.



  • Page 11

    Gigaset A415 / ZAF / A31008-M2501-W101-1-7619 / Penguini.fm / 09.07.2013

    11

    Phone settings
    For details on activating/deactivating advisory tones and battery low tones, see menu tree (¢ page 18).
    For details on setting the display contrast and large dialling numbers, see menu tree (¢ page 18).
    For details on how to set the system PIN on the base station, see the menu overview (¢ page 18).

    Changing the display language

    §Menu§ ¤ q Settings ¤ §OK§ ¤ q Handset ¤ §OK§ ¤ q Language ¤ §OK§ ¤ q (select language) ¤ §OK§

    The current language is indicated by ‰.
    If you accidentally choose a language you do not understand:
    §Menu§ ¤ 421 (press the keys one after the other) ¤ q (select language) ¤ §OK§

    Changing the handsfree/earpiece volume
    In idle status:
    t ¤ Handset Volume ¤ §OK§ ¤ q Earpiece/Speaker ¤ §OK§ ¤ q (set the volume level 1 to 5)
    ¤ §OK§ (‰ = selected)
    During a conversation via the earpiece or in handsfree mode:
    t ¤ q (set the volume level 1 to 5)
    The setting will automatically be saved after approximately 3 seconds or press the display key §OK§.
    You can also set the handsfree/earpiece volume using the menu Audio Settings (¢ page 18).

    Setting the sound of the earpiece
    Adapt the sound of the earpiece to your needs.
    ◆ Low: Standard setting.
    ◆ High: High frequencies are emphasized.
    In idle status:
    t ¤ q Handset Sound ¤ §OK§ ¤ q Low/High ¤ §OK§ (‰ = selected)
    You can also set the sound of the earpiece using the menu Audio Settings (¢ page 18).

    Setting ring tones of the handset
    Setting the ringer volume
    In idle status:
    t ¤ q Ringer Volume ¤ §OK§ ¤ q (set the volume level 1 to 5 or "Crescendo") ¤ §OK§ (‰ = selected)
    You can also set the call volume using the menu Audio Settings (¢ page 18).

    Setting the ringer melody
    Set different ringer melodies for External Calls, Internal Calls and the Alarm Clock.
    In idle status:
    t ¤ q Ringer Melody ¤ §OK§ ¤ q External Calls / Internal Calls / Alarm Clock ¤ §OK§ ¤ q (select melody)
    ¤ §OK§ (‰ = selected)
    You can also set the call volume using the menu Audio Settings (¢ page 18).

    Time Control (day/night mode)

    Template Bali, Version 1, 16.02.2012

    You can specify a time period when you do not want the telephone to signal external calls e.g., during the night.
    Activating Time Control:
    §Menu§ ¤ q Settings ¤ §OK§ ¤ q Handset ¤ §OK§ ¤ q Time Control ¤ §OK§ ¤ Activation ¤ §OK§ (‰ = activated)
    Setting time period:
    §Menu§ ¤ q Settings ¤ §OK§ ¤ q Handset ¤ §OK§ ¤ q Time Control ¤ §OK§ ¤ q Settings ¤ §OK§
    ¤ Off from: ~ (Enter time in 4-digit format) ¤ §OK§ ¤ Off until: ~ (Enter time in 4-digit format) ¤ §OK§

    Anonymous calls silent
    You can set your handset so that it doesn't ring for calls where Calling Line Identification has been withheld. The call will
    only be signalled on the display.
    §Menu§ ¤ q Settings ¤ §OK§ ¤ q Handset ¤ §OK§ ¤ q An.Call Silent ¤ §OK§ (‰ = activated)



  • Page 12

    Gigaset A415 / ZAF / A31008-M2501-W101-1-7619 / Penguini.fm / 09.07.2013

    12
    Activating/deactivating the ringer
    Deactivating/reactivating the ringer permanently
    In idle status, press and hold the star key P. If the ringer is deactivated, the Ú icon appears in the display.
    Deactivating the ringer for the current call
    §Menu§ ¤ Silent ¤ §OK§

    Activating/deactivating music on hold
    You can set that your external participant hears music in case of internal recall and during call transfer.
    §Menu§ ¤ P#Q5#1M ¤ The number for the current setting flashes: 0 = off; 1 = on ¤ enter number ¤ §OK§.

    Repeater mode

    With a repeater, you can increase the range of your base station. You will need to activate repeater mode (¢ page 18).
    Repeater mode and No Radiation mode (¢ page 18) cancel each other out.

    Resetting the handset
    You can reset individual settings and changes that you have made. Entries in the directory, the calls list and the handset's
    registration to the base station will be retained.
    §Menu§ ¤ q Settings ¤ §§OK§§ ¤ q Handset ¤ §§OK§§ ¤ q Reset Handset ¤ §§OK§§ ¤ Reset? ¤ §§OK§§

    Restoring the base station
    When restoring factory settings:
    ◆ Individual settings are reset.
    ◆ All lists are deleted.
    ◆ The No Radiation mode is deactivated.
    The date and time are retained.

    Resetting the base station via the menu
    When resetting via the menu
    ◆ Handsets are still registered.
    ◆ The system PIN is not reset.
    §Menu§ ¤ q Settings ¤ §OK§ ¤ q Base ¤ §OK§ ¤ q Base Reset ¤ §OK§ ¤ Reset? ¤ §OK§

    Resetting the base station using the key on the base station

    Template Bali, Version 1, 16.02.2012

    When resetting the base station using the key on the base station
    ◆ All handsets are de-registered and
    ◆ The system PIN is reset to the original code 0000.
    Carry out the following steps: Remove the mains cable from the base station. Hold down the registration/paging key
    on the base station (¢ page 1) and reconnect the power cable to the base station at the same time. Hold the key down
    for at least 5 seconds.



  • Page 13

    Gigaset A415 / ZAF / A31008-M2501-W101-1-7619 / Penguini.fm / 09.07.2013

    13

    Operating the base station on the PABX/router
    Operating on the router
    When operating the Gigaset on an analogue port of a router, you can reduce problems with echoing by activating the
    XES Mode (¢ page 18). If you have no problems with echoing, this function should be deactivated.

    Operating on the PABX
    The following settings are only necessary when your PABX requires them, see the user guide for your PABX.
    When entering the digits, enter them slowly one after the other.
    Changing the dialling mode

    §Menu§ ¤ P#Q5#1N ¤ The number for the set dialling mode flashes: 0 = tone dialling (DTMF);
    1 = pulse dialling (DP) ¤ enter number ¤ §OK§.

    Setting recall

    §Menu§ ¤ P#Q5#1Q ¤ The number for the current recall flashes: 0 = 80 ms; 1 = 100 ms; 2 = 120 ms;
    3 = 400 ms; 4 = 250 ms; 5 = 300 ms; 6 = 600 ms; 7 = 800 ms ¤ enter number ¤ §OK§.

    Changing pause after line seizure
    You can set the length of the pause inserted between pressing the talk key c and sending the phone number.
    §Menu§ ¤ P#Q5#1L ¤ The number for the current pause length flashes: 1 = 1 sec.; 2 = 3 sec.; 3 = 7 sec.
    ¤ enter number ¤ §OK§.
    Changing the pause after the recall key
    §Menu§ ¤ P#Q5#12 ¤ The number for the current pause length flashes: 1 = 800 ms; 2 = 1600 ms;
    3 = 3200 ms ¤ enter number ¤ §OK§.

    Appendix
    Entering letters/characters
    Standard characters
    Press the relevant key the number of
    times indicated.
    Briefly press the hash key # to
    switch from "Abc" to "123" mode,
    from "123" to "abc" mode and from
    "abc" to "Abc" mode.

    1x

    1 1
    2 a
    I d
    4 g
    5 j
    L m
    M p
    N t
    O w
    1)
    Q
    P *
    #

    Template Bali, Version 1, 16.02.2012

    1) Space

    2x

    3x

    4x

    5x

    6x

    7x

    8x

    9x

    £
    b
    e
    h
    k
    n
    q
    u
    x
    .
    /

    $
    c
    f
    i
    l
    o
    r
    v
    y
    ,
    (
    #

    ¥
    2
    3
    4
    5
    6
    s
    8
    z
    ?
    )
    @

    ¤
    ä
    ë
    ï

    10x 11x 12x 13x 14x 15x

    á
    é
    í

    à
    è
    ì

    â
    ê
    î

    ã

    ç

    ö
    7
    ü
    9
    !
    <
    \

    ñ
    ß
    ú
    ÿ
    0
    =
    &

    ó

    ò

    ô

    õ

    ù
    ý
    +
    >
    §

    û
    æ
    %

    ø
    :

    å
    ¿

    ¡

    "



    ;

    _



  • Page 14

    Gigaset A415 / ZAF / A31008-M2501-W101-1-7619 / Penguini.fm / 09.07.2013

    14
    Technical Data
    Batteries
    Technology: Nickel-metal-hydride (NiMH); Size: AAA (Micro, HR03); Voltage: 1,2 V; Capacity: 450 - 1000 mAh

    Handset operating times/charging times
    Your handset can charge batteries up to a capacity of 1000 mAh. The use of special high-performance batteries or batteries with high capacities is not recommended for cordless phones.
    The operating time of your Gigaset depends on the capacity and age of the batteries and the way it is used. (Standby
    time/talk time/operating time are maximum possible values, charging times are typical values.)

    Standby time (hours)
    Talktime (hours)
    Operating time for 1.5 hrs of calls per day (hours),
    No Radiation mode switched off/on
    Charging time in base station (hours)
    Charging time in charger (hours)

    450
    185
    14
    95/70
    5.0
    4.5

    Capacity (mAh) approx.
    550
    700
    800
    250
    285
    330
    19
    22
    25
    130/95
    6.5
    6.0

    150/110
    7.5
    7.0

    175/125
    8.5
    8.0

    1000
    405
    31
    215/155
    10.5
    10.0

    Due to the constant progression in battery development, the list of recommended batteries in the FAQ section of the
    Gigaset Customer Care pages is regularly updated: www.gigaset.com/service

    Base station power consumption
    In standby mode
    – Handset in base station
    – Handset outside base station
    During a call

    approx. 0.6 W
    approx. 0.55 W
    approx. 0.65 W

    General specifications

    Template Bali, Version 1, 16.02.2012

    DECT standard
    GAP standard
    Range
    Base station power supply
    Environmental conditions in operation

    is supported
    is supported
    up to 300 m outdoors, up to 50 m indoors
    230 V ~/50 Hz
    +5 °C to +45 °C, 20% to 75% relative humidity



  • Page 15

    Gigaset A415 / ZAF / A31008-M2501-W101-1-7619 / Penguini.fm / 09.07.2013

    15
    Questions and answers
    If you have any queries about the use of your telephone, visit our website at www.gigaset.com/service
    for 24-hour support. The table below contains a list of common problems and possible solutions.
    Problem

    Cause

    Nothing appears on
    the display.

    The handset is not switched on.
    The batteries are flat.

    Solution

    Press the end call key a for approx. 5 seconds or place
    the handset in the base station.
    Charge or replace the batteries.

    No wireless connection The handset is outside the range of Move the handset closer to the base station.
    to the base station,
    the base station.
    Base flashes in the dis- The base station is not turned on. Check the mains connector on the base station
    play.
    ¢ page 3.
    The display shows
    Handset has not been registered
    Register HS or Put into with the base station or has been
    base.
    de-registered.
    Handset does not ring. The ring tone is deactivated.
    The phone only rings if the phone
    number has been transferred.
    The phone does not ring in a specific time period.
    You cannot hear a
    ringer/dialling tone
    from the fixed line network.

    The phone cord supplied has not
    been used or has been replaced by
    a new cord with the wrong jack
    connections.

    Register the handset ¢ page 9.

    Activate the ring tone ¢ page 12.
    Activate the ring tone for anonymous calls ¢ page 11.
    Deactivate the "Time Control" or change the time period
    ¢ page 11.
    Please always use the phone cord supplied or ensure
    that the pin connections are correct when purchasing
    from a retailer: 3-4 assignment of telephone leads/
    EURO CTR37.

    Error tone sounds after The system PIN you have entered is Reset the system PIN to the default 0000 ¢ page 12.
    system PIN prompt.
    incorrect.
    All handsets are de-registered. All settings are reset.
    All lists are deleted.
    PIN forgotten.

    Care
    Wipe the device with a damp cloth or an antistatic cloth. Do not use solvents or microfibre cloths.
    Never use a dry cloth; this can cause static.
    In rare cases, contact with chemical substances can cause changes to the device’s exterior. Due to the wide variety of
    chemical products available on the market, it was not possible to test all substances.
    Impairments in high-gloss finishes can be carefully removed using display polishes for mobile phones.

    Template Bali, Version 1, 16.02.2012

    Contact with liquid

    !

    If the device comes into contact with liquid:
    1 Disconnect the power supply.
    2 Remove the batteries and leave the battery compartment open.
    3 Allow the liquid to drain from the device.
    4 Pat all parts dry.
    5 Place the device in a dry, warm place for at least 72 hours (not in a microwave, oven etc.) with the battery compartment open and the keypad facing down (if applicable).
    6 Do not switch on the device again until it is completely dry.
    When it has fully dried out, you will normaly be able to use it again.



  • Page 16

    Gigaset A415 / ZAF / A31008-M2501-W101-1-7619 / Penguini.fm / 09.07.2013

    16
    Customer Service & Assistance
    Do you have any questions? As a Gigaset customer, you can find help quickly in this User Manual and in the
    service section of our Gigaset online portal www.gigaset.com/service.
    In our constantly updated online service you can find:

    ◆ Extensive information about our products
    ◆ FAQ compilations
    ◆ Keyword search to help find topics quickly
    ◆ Compatibility database: Find out which base stations and handsets can be combined.
    ◆ Product comparison: Compare the features of several products with each other.
    ◆ Downloads for user manuals and current software updates
    ◆ E-mail contact form for customer service
    Please register your phone online right after purchase.
    This enables us to provide you with even better service regarding questions or an after sales query/issue/claim. In order
    to contact our customer service via email, please use the email contact form from our Gigaset online portal after selecting your home country.
    Our representatives are also available on the telephone hotline for consultation: 0800 98 08 42.

    Authorisation
    This device is intended for connection to analogue networks outside the European Economic Area (with the exception
    of Switzerland) depending on national type approval.
    Country-specific requirements have been taken into consideration.
    We, Gigaset Communications GmbH, declare that this device meets the essential requirements and other relevant regulations laid down in Directive 1999/5/CE.
    A copy of the Declaration of Conformity is available at this Internet address:
    www.gigaset.com/docs

    Dealer or local after-sales services (Southern Africa)

    Template Bali, Version 1, 16.02.2012

    In the event of an after-sales query/issue/claim please refer back to your point of purchase.
    Proof of purchase (receipt) has to be submitted.



  • Page 17

    Gigaset A415 / ZAF / A31008-M2501-W101-1-7619 / Penguini.fm / 09.07.2013

    17
    Environment
    Our environmental mission statement
    We, Gigaset Communications GmbH, bear social responsibility and are actively committed to a better world. Our ideas,
    technologies and actions serve people, society and the environment. The aim of our global activity is to secure sustainable life resources for humanity. We are committed to a responsibility for our products that comprises their entire life
    cycle. The environmental impact of products, including their manufacture, procurement, distribution, utilisation, service
    and disposal, are already evaluated during product and process design.
    Further information on environmentally friendly products and processes is available on the Internet at
    www.gigaset.com.

    Environmental management system
    Gigaset Communications GmbH is certified pursuant to the international standards ISO 14001 and
    ISO 9001.
    ISO 14001 (Environment): Certified since September 2007 by TÜV SÜD Management Service GmbH.
    ISO 9001 (Quality): Certified since 17/02/1994 by TÜV SÜD Management Service GmbH.

    Disposal

    Template Bali, Version 1, 16.02.2012

    Batteries should not be disposed of in general household waste. Observe the local waste disposal regulations, details of
    which can be obtained from your local authority.
    All electrical and electronic products should be disposed of separately from the municipal waste stream via designated
    collection facilities appointed by the government or the local authorities.
    This crossed-out wheeled bin symbol on the product means the product is covered by the European
    Directive 2002/96/EC.
    The correct disposal and separate collection of your old appliance will help prevent potential negative
    consequences for the environment and human health. It is a precondition for reuse and recycling of used
    electrical and electronic equipment.
    For more detailed information about disposal of your old appliance, please contact your local council refuse centre or
    the original supplier of the product.



  • Page 18

    Gigaset A415 / ZAF / A31008-M2501-W101-1-7619 / Penguini.fm / 09.07.2013

    18

    Menu overview
    Your phone has an extensive range of features. These are offered in the form of menus.
    To select a function while the phone is in idle status, press §Menu§ (open menu), use the control key q to scroll to the
    function you require and press §OK§ to confirm.
    To return to idle status: press and hold the a key.
    Not all of the functions described in this user guide are available in all countries.

    é

    Alarm Clock

    Activation
    Wake-upTime

    è Audio Settings

    ¢ page 10
    ¢ page 10

    Handset Volume
    Handset Sound
    Ringer Volume

    Earpiece/Speaker

    ¢ page 11

    Low/High

    ¢ page 11

    ¢ page 11

    Ringer Melody

    External Calls/Internal Calls/Alarm Clock

    Advis.Tones

    On/off

    Battery Low

    On/off

    ¢ page 11

    ê Answer Machine
    Play Messages
    Net Mailbox

    ç Settings
    Date/Time
    Handset

    Playing back messages on the network mailbox ¢ page 9.
    Enter number of the network mailbox ¢ page 9.

    ¢ page 5
    Language

    ¢ page 11

    Big Dial Font

    Set bigger digits for dialling.

    Contrast

    Set the display contrast to 9 levels.

    Time Control
    An.Call Silent
    Auto Answer
    Register HS
    De-register HS
    Reset Handset

    Template Bali, Version 1, 16.02.2012

    Base

    Call list type

    ¢ page 11

    Activation/Settings

    ¢ page 11

    Activate/deactivate auto answer ¢ page 6.

    ¢ page 9
    ¢ page 9
    ¢ page 12

    ¢ page 8

    Missed Calls/All Calls

    System PIN

    Change system PIN (default is 0000).

    Base Reset

    ¢ page 12

    Additional

    Repeater
    XES Mode

    ECO DECT
    ¢ page 1
    Listening in

    ¢ page 12
    Activating/deactivating
    (Activate in case of problems with echos on
    an analogue port of a router.)

    No Radiation/Max. Range

    ¢ page 10

    ¢ page 1



  • Page 19



  • Page 20



  • Page 21



  • Page 22



  • Page 23



  • Page 24

    Template Bali, Version 1, 16.02.2012

    Gigaset A415 / ZAF / A31008-M2501-W101-1-7619 / Penguini.fm / 09.07.2013

    Issued by
    Gigaset Communications GmbH
    Frankenstr. 2a, D-46395 Bocholt

    © Gigaset Communications GmbH 2013
    Subject to availability. All rights reserved.
    Rights of modification reserved.
    www.gigaset.com
    This user guide is made from 100 % recycled paper.






Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Gigaset A415 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Holen Sie sich Ihr Benutzerhandbuch per E-Mail

Geben Sie Ihre E-Mail-Adresse ein, um das Handbuch zu erhalten von Gigaset A415 in der Sprache / Sprachen: Englisch als Anhang in Ihrer E-Mail.

Das Handbuch ist 1,3 mb groß.

 

Sie erhalten das Handbuch in Ihrer E-Mail innerhalb von Minuten. Wenn Sie keine E-Mail erhalten haben, haben Sie wahrscheinlich die falsche E-Mail-Adresse eingegeben oder Ihre Mailbox ist zu voll. Darüber hinaus kann es sein, dass Ihr ISP eine maximale Größe für E-Mails empfangen kann.

Andere Handbücher von Gigaset A415

Gigaset A415 Bedienungsanleitung - Deutsch - 24 seiten

Gigaset A415 Bedienungsanleitung - Holländisch - 24 seiten

Gigaset A415 Bedienungsanleitung - Französisch - 22 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info