636445

Globo HD XC1-01 Seite 4

4
Zoom out
Zoom in
Vorherige Seite
1/8
Nächste Seite
Menu structure and functions description
Troubleshooting
Safety precautions Environment Protection
Technical Specification
CAUTION:
Warning: The lightning ash with arrowhead symbol, within an equilateral triangle,
is intended to alert the user to „dangerous voltage” and to prevent from a risk of
electric shock.
Warning: To reduce the risk of electric shock, don’t open the cabinet. Refer servicing
to qualied personnel only.
Warning: The exclamation point within an equilateral triangle is intended to alert the
user to important operating and maintenance (servicing).
Warning: Do not use this receiver where contact with or immersion in water is a possibility. Do not use
near ower vase, washbowls, kitchen sinks, laundry tubs, swimming pools, etc.
Warning: Do not put the candle or lamp stand on the cabinet; otherwise, there is the danger of re.
Warning: The unit should be connected to a power supply only of the type described in the operating
instructions or as marked on the unit. If you are not sure of the type of power supply (for example, 120
or 230 V) to your home, consult your local dealer or local power company.
Warning: This product install diodes. Do not open the cabinet or touch any parts in the inner
mechanism. Consult your local dealer for technical service if the opening is required.
Note: To ensure proper use of this product, please read this User manual carefully and retain for
further reference.
Note: This product install diodes. Do not open the cabinet to avoid the unit direct exposure to
radiation.
Unit Cleaning: After the unit power is turned o, you can clean the cabinet, panel and remote control
with a soft cloth lightly moistened with a mild detergent solution.
Attachments: Never add any attachments and/or equipment without the manufacturer consent; as
such additions may result in the risk of re, electric shock, or other personal injury.
Locating: Slots and openings in the cabinet are provided for ventilation to protect it from overheating.
Do not block these openings or allow them to be blocked by placing the receiver on a bed, sofa, or
other similar surface, nor should it be placed over a radiator or heat register.
Power-Cord Protection: Place the power-supply cord out of the way, where it will not be walked on.
Please take special attentions to cords at plugs, convenience receptacles, and the point where they
exit from the unit.
Object and Liquid Entry: Never put objects of any kind into this receiver through openings, as they
may touch dangerous voltage points or short-out parts that could result in a re or electric shock.
Never spill any liquid on the receiver.
Note: Moisture may be formed on the lens when the unit is suddenly moved from a cold environment
or an air-condition room to a warm place or immediately after a heater has been turned on or in a
steamy or very humid room. If the moisture forms inside the unit, it may not operate properly. To
correct this problem, turn on the power and wait about two hours for the moisture to evaporate.
Parts Replacement: When the unit parts need to be replaced, user should make sure the service
technician use the replacement parts specied by the manufacturer or having the same characteristics
as the original part. Unauthorized replacement may put the unit In the risk of re, electric shock or
other hazards.
Safety Check: After all the maintenances and repairs are done, user is required to request the service
technician to conduct the overall safety check to ensure the machine is In the proper condition.
Attention!
Your product Is marked with this symbol. It means that used electrical and electronic
products should not be mixed with general household waste. There is a separate collection
system for these products.
Information on Disposal for Users (private households) in the European Union.
Used electrical and electronic equipment must be treated separately and In accordance with
legislation that requires proper treatment, recovery and recycling of used electrical and
electronic equipment.
Following the implementation by member states, private households within the EU states may return their
used electrical and electronic equipment to designated collection facilities free of charge*. In some countries*
your local retailer may also take back your old product free of charge if you purchase a similar new one. *)
Please contact your local authority for further details. If your used electrical or electronic equipment has
batteries or accumulators, please dispose of these separately beforehand according to local requirements.
By disposing of this product correctly you will help ensure that the waste undergoes the necessary treatment,
recovery and recycling and thus prevent potential negative eects on the environment and human health
which could otherwise arise due to inappropriate waste handling.
Information on Disposal for Business Users
In the European Union. If the product is used for business purposes and you want to discard It, please contact
your dealer who will inform you about the take-back of the product. You might be charged for the costs arising
from take-back and recycling Small products (and small amounts)might be taken back by your local collection
facilities. In other Countries outside the EU.
If you wish to discard of this product, please contact your local authorities and ask for the correct method of
disposal.
RF Input connector IEC 169-2, FEMALE (F-TYPE)
Input impedance 75 Ω
RF Output connector IEC 169-2, FEMALE (F-TYPE)
Waveform QAM
Video decoding MPEG-2 MP@ML, MPEG-2
MP@HL, MPEG-4 H.264/
AVC HP@L4.1
Video resolution 480i, 576i, 480p, 576p, 720i,
1080i, 1080p
Audio decoding MPEG/MusiCam Layer I & II,
MP3 Dolby Digital Downmix
Video/Audio connector CVBS, CINCH L/R Audio
S/PDIF, HDMI, USB
Rated voltage 100 ~ 230V, 50/60Hz
Rated consumption 5W
Standby consumption 0,5W
Operating temperature 5 - 40˚C
Operating humidity <95%
Net weight <0,5kg
Receiver measurements 180mm x 100mm x 35mm
Weight and dimensions are not absolutely exact values.
Specications are subject to change (by manufacturer)
without notice.
Troubles Possible causes Suggested solutions
No power The power cord has not been well connected
Plug the power cord into the outlet
tightly and turn on the power; if no
power still, turn o the power again, and
turn it on in 5-10 minutes
Receiver cannot play
scrambled channels
Acces card is not inserted , or is not inserted
correctly into card reader slot
Insert smart card according to
description on right side of receiver.
Acces card is not activated
Use Acces Card menu to activated the
card.
Cannot scan
programs
Parameter input incorrectly
Input Frequency, SR, QAM parameters
correctly or use Blind Scan mode
No picture
Output cord is connected incorrectly Connect the output cord correctly
The video output mode of the unit is
dierent from the mode of monitor
Reset the working mode
No color
Output cord is connected incorrectly Connect the output cord correctly
The video output mode of the unit is
dierent from the mode of monitor
Reset the working mode
Remote control fails
to work
Batteries are connected incorrectly Connect batteries correctly
Batteries are exhausted Replace batteries
Beyond the eective operation range Operate within normal range
Remote sensor is poited to bright light Place the unit elsewhere
Audio sounds and
subtitles lsnguage
are not the chosen
items
The right language channel has not been
chosen
Set the right language channel in the
menu
No sound at all
The unit is in mute status Cancel the mute
Volume is set at too low level Augment the volume
Cable is connected incorrectly Connect the cable correctly
Serious destorition
or cannot receive
signal normally
Too much interferential signal
Change the signal cable to a new one. If
it doesn’t help, contact cable operator.
Channel editor In this manu you can manage your
channels;
Tv channels list lock, remove, rename TV channels;
Radio Channel list lock, remove, rename radio channels;
Favorite rename favourite groups;
Delete all deletes all channels from all lists.
Channel scan In this menu you can scan channels
Quick search scan single frequency at chosen symbol rate and
QAM;
Auto search scan frequency bandwidth, from 41.0Mhz to
858.0Mhz, at chosen QAM and symbol rate;
Blindscan perform complex scan on all most common QAM
and symbol rates and adjustable frequency -
from 41.0MHz to 858.0Mhz;
Scan settings select scan settings.
System settings In this menu you can find basic settings
Information basic information about your receiver;
S/W Upgrade by OTA manually check for software upgrade;
A/V Settings change screen parameters (options depend on
your TV);
Display Settings adjust video output parameters;
Time Settings set time by adjusting GMT zone, adjust manually
or set your region;
Parental Lock secure entrance to menu by password, change
level of age control and change password
(default password is 0000);
Language setup change menu language and set preffered audio
tracks for channels;
OSD settings chan On Screen Display settings;
Other change settings for Auto Shut Down, Clock on
LED display, Channle change and Channel list
style;
Factory settings load default settings and delete all the channels.
Media player In this menu you can manage your files
from USB drive
Your movies play your movies;
Your images display your photos;
Your music play your music.
Access card informations about inserted card and
subscription rights
Subscription status display subscription status;
Event Status display event status;
Tokens status display tokens status (if available);
Change CA PIN change CA PIN;
Maturity Rating set maturity lock settings;
About Conax CA display informations about Conax.
External drive In this manu you can check info about
your external USB drive
Upgrade by USB upgrade your receiver software by USB drive;
Remove USB device safely use this function to remove USB drive safely.
Menu Function Menu Function
Menu structure and functions description
Look through the trouble shooting information. Some simple checks or minor
adjustment of the unit on your part may help resolve the problems. If the problems
prove to be beyond your capability, you had better hand it over to a professional
qualied technician.
Manual_XC1_01-REV04 (PL ENG RU DE).indd 4 2014-03-26 14:01:29
4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Globo HD XC1-01 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info