636444
5
Zoom out
Zoom in
Vorherige Seite
1/19
Nächste Seite
8 9
Installation
Connect an antenna to receiver’s AERIAL IN connector.
Using HDMI cable connect the receiver with at panel TV or
Using SCART cable connect it with classic TV.
At the end connect the main cord to the main socket.
Installation
2
Read this chapter to learn how to connect the receiver to a TV set, congure
the receiver, use USB drive and more.
1
2.1 Connection
2.2 Starting up for the rst time
1
1
2
2
3
3
4
4
1/5 Select language Using / buttons choose menu lan-
guage. Conrm your choice using blue
button on remote control.
2/5 Choose tv and aspect Using / buttons choose TV and aspect
mode. Choose 4:3 for standard TV or 16:9
for at panel TV (LCD,LED). You can also
choose option that your TV will manage
aspect recognition (SCART connection
is required). Conrm your choice using
blue button on remote control.
3/5 Select menu style and color Using / buttons choose menu color.
Conrm your choice using blue button
on remote control.
4/5 Select summer time Using / buttons choose if you want
to select summer time. It is important for
proper working of EPG (Electronic Pro-
gram Guide). Conrm your choice using
blue button on remote control.
5/5 Select country Using / buttons choose a country
where you will receive terrestrial TV
signal. Conrm your choice using blue
button on remote control.
Turn on the TV Set. After a while on TV Set you should see receiver’s OSD.
If the TV Set is not displaying receiver’s OSD, probably a signal source is set
wrong. Check the TV Set documentation for information how to change the
signal source.
Generally once the receiver is switched on, the Welcome Screen emerges. To
enter Installation Guide menu use OK button on the remote control or wait
few seconds.
If you want to return to previous level in this Guide, use red button.
If after switching on the receiver, you cannot see the Installation Guide
menu, use MENU button to enter the main menu and using / buttons
choose TOOLS menu and select Load Factory Settings and conrm it using
OK button (default password is 0000).
5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Globo OPTICUM HD T90 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info