Please read the user manual before you place the thermostat.
Keep the documents for later questions and provide them if you
pass the thermostat on to other persons.
In this packing:
• Go Green Radiator Thermostat V
thermostat
• User manual
• Connector
• 3
Application as directed
By purchasing the Go Green Radiator Thermostat V
energysaving radiator thermostat you own a program mable radiator
thermostat which can be used for temperature regulations in
enclosed rooms andtherefore, it can contribute to the reduction of
heating energy
The programming port is intended ONL
Never connect other devices with the programming port!
Display and control elements
1) Heating times
2) Child lock active
3) Battery low
4a) T
active
4b) Comfort temperature
active
4c) Economy temperature
active
4d) Window/freeze
protection function active
5)
active
6a) Button – leads to
the main menu (starting
from regular display);
within the menu one
keypress leads to the
previous level
6b) Button - confirmation of setting
6c) Button - timer function
7) Selector wheel
Set up menu
By pressing you will arrive at the set up menu.
Please choose one of the items with the selector wheel.
With you can select one menu item and with the selection
wheel they can be adjusted. The button confirms the setting.
The button leads to the previous level.
MODE to select the mode
AUTO = automatic mode
MANU = manual mode
PROG setting of time programme
TEMP setting of comfort and economy temperature
ZEIT setting of date and time
FENS window function
RES reset of the device to factory preset
ADAP starting
URLA travel function
INST installation function
OFFS adaptation of temperature to the room situation
Inserting / replacing batteries
In order to open the battery compartment please push at the
marked positions to remove the cover
Then insert the batteries as shown in the illustration.
Do not use accumulators! Ensure that the polarity is correct!
Mo Di Mi Do Fr Sa So
:
AUTO
MANU
0 24 12 18
1
4
2
3
5
7
6
MENU
OK
MENU
OK
OK
MENU
Go Green Digital thermostat radiator
valve
Attention:
• Never recharge batteries, danger of explosion!
• Do not short-circuit batteries!
• Do not disassemble batteries!
• T
• Keep batteries away from extreme warming – danger of leakage!
• Do not apply used and new batteries together
• If needed, clean the battery and the contacts before using them.
• Keep the batteries away from children.
• When getting in touch with battery acid instantly irrigate the
affected parts with clear water and call a doctor
Setting date and time
After inserting the batteries for the first time, the date will flash on
the display
Set date with the selector wheel.
Confirm with
Set month with the selector wheel.
Confirm with
Set day with the selector wheel
Confirm with
Set hour with the selector wheel
Confirm with
Set minute with the selector wheel
Confirm with That's it
On the display will be shown. Now
move to the installation position in order to make the installation easier
As soon as Go Green Radiator Thermostat V
installation will be shown on the display
Y
But in case of that, Go Green Radiator Thermostat V
move to the installation position.
→ In case of replacing batteries, the stored time programme will
remain active. Y
Installation
Go Green Radiator Thermostat V
mounted on all common valves (see adapter table). It can be installed
without grime and water spots because the heating circuit is not
interrupted.
1) T
fastening and pull the thermostat off of the valve.
2) Use an appropriate adapter
Screw the connector on the valve or the adapter
Now
connector until it noticeably clicks into place.
→ In case of a later installation , please switch in the menu to
before you install the device. Herewith the installation is
facilitated.
Dismounting
→ In order to dismount Go Green Radiator Thermostat V
the releasing device to loosen the locking device. Now
Go Green Radiator Thermostat V
OK
OK
OK
OK
OK
OK
Adaptation
Initial installation: Press the button until appears on the
display so that Go Green Radiator Thermostat V
start its adaptation. The device will adapt itself to the stroke of your
valve body
several times to store the end points.
In some cases this process can take a few minutes.
After successful adaptation it returns to normal mode.
→ Should adaptation become necessary again, e.g. if your radiator
does not cool down in the -Position, please press in the
menu the button until adaptation starts again.
→ If the mistake is shown on the display place Go Green Radiator
Thermostat V
batteries out for a short time in order to execute a reset.
Basic operating modes
MANU-mode
In the MANU-mode Go Green Radiator Thermostat V
the manually specified temperature.
AUTO-mode
In the
between to temperatures according to the time programme that has
been set:
comfort temperature (factory preset 21°C)
economy temperature (factory preset 16°C)
The heating and economy times can be specified via the adjustable
time programme. It is possible to set 8 switch points (4 heating and
4 economy times) per day at the most. Go Green Radiator
Thermostat V
Heating time:
Heating with comfort temperature (factory preset: First heating
time at 07:00)
Economy time:
Lowering to economy temperature (factory preset: First economy
time at 22:00)
Setting heating and economy times
With Go Green Radiator Thermostat V
4 heating and 4 economy times per day – one for each day or one
for a block of several days.
T
Additionally
the menu bar on the display
Block construction:
T1–5 = same programme from Monday to Friday
T1–6 = same programme from Monday to Saturday
T1–7 = same programme from Monday to Sunday
→ For non-programmed days the factory preset remains active.
Setting of an individual programme
Press . Select the menu item with the selector wheel.
Press
for Monday is shown on the display
Select day/block with the selector wheel. Confirm with
Set the beginning of the first heating time (symbol ) with the selector
wheel. Confirm with
Set the beginning of the first economy time (symbol ) with the
selector wheel. Confirm with
Now
be entered.
→ If you do not want to set a further heating/economy time confirm
"-- --" with
The next day for programming is shown on the display
→ If you do not want to enter a further day
. If the temperature is shown on the display the programming
is finished.
→ Within the blocks you can also overwrite single days with different
times.
Setting comfort and economy temperature
Press . Select the menu item with the selector wheel .
Confirm with .
Set comfort temperature with the selector wheel. Confirm with
Set the economy temperature with the selector wheel.
Confirm with
Area 8°C, freeze protection function is active
Area valve is completely open
Remark
Maximum energy saving can be obtained with an economy
temperature which is about 5˚C below the comfort temperature.
MENU
OK
OK
OK
OK
OK
MENU
MENU
OK
OK
OK
Manual operation
With the selector wheel an adaptation of the room temperature is
possible at any time. In the
next switch point is reached. Now
becomes active again.
Further functions
The timer function is selected with the timer-button
With this function a user-defined temperature for a programmable
period can be entered. This can be very useful in case of a party
for example. Press . First, the time for which the time
programme has been deactivated is shown. Confirm with .
Now
Offset
If the perceived temperature significantly differs from the set
thermostat temperature a temperature set up can be executed.
Press . Select the menu item with the selector wheel.
Confirm with . The degree setting will flash on the
display
Now set up the desired adaptation for the temperature (from -5 up
to 5ºC) with the selector wheel. Confirm your entry with
The temperature display does not change !
Window function
If you open a window and consequently the temperature drops
significantly Go Green Radiator Thermostat V
close the heating valve in order to save energy
show .
resume normal operation.
For the set up select in the menu. Confirm with
First, the sensibility is selected with the selector wheel
= high sensibility
= medum sensibility (factory preset)
= low sensibility). Confirm with
Now
for which the valve should remain closed. Confirm with
T
For the time you are absent you can select an individual temperature.
After this period the originally defined programme becomes active
again.
Press . Select the menu item . Confirm with
(Suitcase symbol appears on the display)
Select with the selector wheel the end of the travel function
(= date of the recommencement of the regular heating times).
Confirm with
Set the time and confirm with the button
The signal appears on the display
and confirm with . (Suitcase symbol appears on the
display). With the function can be activated.
Child lock
Y
device from unauthorized activation.
Press the buttons and at the same time for about
2 seconds until the symbol appears on the display in order to
lock the device. By using this button combination again the symbol
disappears and you release the lock.
Heating pause – Closing the Go Green Radiator Thermostat V
Press . Select the menu item with the selector wheel.
Confirm with
Select and confirm with .
Set the temperature on the display to .
The valve is now closed and will work with a time programme.
The calcification protection function remains active once a week.
After the heating pause you switch in the menu to the
and the personally set programme will be executed again.
Going back to factory preset / All reset
Press . Select the menu item with the selector wheel.
Confirm with . flashes, confirm with
Go Green Radiator Thermostat V
Now proceed as described for the initial operation.
Freeze protection and calcification protection function are active
automatically
Freeze protection function
If the temperature drops below 6°C, Go Green Radiator Thermostat
V
This prevents the radiators from freezing.
Calcification protection
T
Thermostat V
once a week on Friday mornings.
OK
OK
MENU
OK
OK
OK
OK
OK
MENU
OK
OK
OK
OK
MENU
OK
MENU
OK
OK
MENU
OK OK
Cleaning and used devices
Cleaning
T
dry or lightly wet cloth.
damage the device.
Used devices
Do not throw old devices and packaging into the household waste.
They can be recycled. Y
local government.
Adapters
Heimeier
MNG, Honeywell, Braukmann,
thread-measure dimension of
M 30x1,5
Danfoss RA
must be plugged on the valve
tapped)
Danfoss RA
Danfoss RA
Help
Problem Cause Solution
no adapter required
+ accompanying pin,
only for RA
Batteries do not
have enough power
Replace batteries.
Heating element
does not cool
down
V
close completely
It may be that the
closing point of
your valve seat
has shifted
Adapt again (see
Adapting).
Move the valve
stem several times
by hand, it may be
that adaptation is
impossible because
your valve is
calcified or the
seat no longer
performs its function
Heating element
does not warm
up
Is the boiler water
temperature OK ?
V
open, is it calcified
after the summer
pause/ heating
pause ?
Adjust the water
temperature of the
boiler water
Remove the Go
Green Radiator
Thermostat V
move the valve stem
back and forth per
hand or with a tool
No adaptation
possible
Is the installation
OK?
Go Green Radiator
Thermostat V
not installed to the
heater
V
short
Install the product
to the heater
Open and close the
valve several times
manually or
replace the batteries
Motor movement
is not possible
Does the valve
stem move
freely ?
www
Art.nr
