7. BATTERY CHARGING Before you start
to use your navigation system, you have to
recharge its battery. At the first time, fully
charge the battery to ensure its maximal capacity
and lifetime. We recommend that the first
charging lasts for at least 5 hours. Subsequent
chargings may be shorter.
We recommend you to connect the
GOCLEVER NAVIO 520 to car's power supply
(12V cigarette lighter) whenever you use it to
ensure an adequate level of battery charge.
GOCLEVER NAVIO 520 navigation system
can also be charged by means of computer
USB port, but we do not recommend it, since it
lengthens the charging time.
However, if you want to charge the device
from your computer, connect the USB cable to
the mini-USB port on the side of the device.
Connect the other end of the cable to a
computer USB port.
8. Installation of a microSD
memory card
When the card is installed it should not be
removed from the device during the operation.
If you need to remove the card, turn off the
device, press the card and remove it from the
slot. In order to install it once again: insert the
card and press it until it clicks. Then, the card
is seated properly.
THE DEVICE SUPPORTS microSD
CARDS up to 8 GB.
