656066
4
Zoom out
Zoom in
Vorherige Seite
1/5
Nächste Seite
Body
1. Sync Cord
2. Power Cord
3. Instruction Manual
Accessories
1. Power Socket 2. Sync Cord Jack 3. Power Switch 4. Flash Output Controller
5. Optical Control and Anti-Preflash Switch 6. Modeling Lamp Switch 7. Buzz Button
8. Test Button 9. Flash Output Level Indicator 10. Slave Trigger Indicator
11. Modeling Lamp Indicator 12. Buzz Indicator 13. Charging Indicator Lamp
14. Fuse 15. Mounting Bracket 16. Umbrella Input 17. Light Sensor
Flash Preparation
Test Button
Attach the flash unit on an
appropriate light stand.
Adjust the mounting bracket
(15) for a good angle and
make sure it's tightened and
fixed.
The umbrella input (16) is
applicable for any studio
umbrella.
Power Connection
Connect the flash to an AC power source via power cord and turn on the power
switch (3). The charging indicator lamp (13) remains off, indicating the unit is
charging, no flash at this moment. When the unit is ready to fire, the charging
indicator lamp (13) is on.
Flash Output Control
Flash output controller (4) controls the power radio, adjustable power from 1/8
to full.It can meet customers' requirements for light in different environment.
(Note: When adjusting the power from full power to a lower setting, press the
test button to release the power in the capacitor, so when recharged, the flash
output will be in the corresponding setting.)
To fire the flash without taking a picture, push the test button. It will also adjust
the brightness when combined with the flash output controller (4).
Sync Triggering
The sync cord jack (2) is
a Φ3.5mm mini plug.
When working with sync
cord triggering method,
insert one end of sync
cord or a trigger plug
into it; the flash then
can be fired synchronously.
1 2
17
4
1
5
2
3
8
6
10
16
15
7
13
12
11
14
9
Names of Parts
Operations
05
06
4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Godox Smart 250SDi wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info