Bedienungsanleitung Godox TT680 N (Seite 4 von 9) (Englisch)

656038

Zoom out

Zoom in

Vorherige Seite

1/9

Nächste Seite

2. Focus the subject.

• Press the shutter button

halfway to focus.

• The shutter speed and

aperture will be displayed in

the viewfinder.

• Check that the < > icon is

lit in the viewfinder.

60 5.0

TTL

0.5 0.7

1.5

6 9

1.7

2.3

10 15 20

40 60

Zoom

mm F

3. Take the picture.

• Check that the subject is

within the effective range

displayed on the LCD panel.

• Right before the shot is

taken, a preflash is fired, and

then the main flash is fired.

• <TTL> will be displayed on the LCD panel even if the camera is

compatible with i-TTL.

Using i-TTL Autoflash in the Shooting Modes

Just set the camera’s shooting mode to <A> (aperture-priority AE),

<S> (shutter-priority AE), or <M> (manual) and you can use i-TTL

autoflash.

Select this mode when you want to set the shutter speed

manually.

The camera will then automatically set the aperture

matching the shutter speed to obtain a standard exposure.

• If the aperture display blinks, it means that the

background exposure will be underexposed or

overexposed. Adjust the shutter speed until the aperture

display stops blinking.

Select this mode when you want to set the aperture

manually.

The camera will then automatically set the shutter speed

matching the aperture to obtain a standard exposure.

If the background is dark like a night scene, a slow sync

speed will be used to obtain a standard exposure of both

the main subject and background.

Standard exposure of the main subject is obtained with

the flash, while a standard exposure of the background is

obtained with a slow shutter speed.

• Since a slow shutter speed will be used for low-light

scenes, using a tripod is recommended.

• If the shutter speed displays blinks, it means that the

background exposure will be underexposed or

overexposed. Adjust the aperture until the shutter speed

display stops blinking.

Select this mode if you want to set both the shutter speed

and aperture manually.

Standard exposure of the main subject is obtained with

the flash. The exposure of the background is obtained

with the shutter speed and aperture combination you set.

Flash Sync Speeds and Apertures Used

Aperture Setting

Automatic

Manual

Shutter Speed Setting

Set automatically (1/60s-1/Xs)

Set manually (30s-1/Xs)

Set automatically (30s-1/Xs)

Set manually (buLb,30s-1/Xs)

• 1/X sec is the camera's maximum flash sync speed.

FV Lock: Flash Value Lock

FV (flash value) lock locks the correct flash exposure setting for

any part of the scene.

With <TTL> displayed on the LCD panel, you press the camera’s

<FV> button.

FEC: Flash Exposure Compensation ----------------------------06

FV Lock: Flash Value Lock -------------------------------------06

High-speed Sync---------------------------------------------07

Bounce Flash---------------------------------------------------07

ZOOM: Setting the Flash Coverage and Using the Wide Panel--------08

M: Manual Flash-------------------------------------------------09

MULTI: Stroboscopic Flash--------------------------------------10

Second-Curtain Sync---------------------------------------11

S1/S2 Slave Triggering Mode------------------------------------11

C.Fn: Setting Custom Functions---------------------------------12

Protection Function--------------------------------------------13

Using Flash

TTL

0.5 0.7

1.5

6 9

1.7

2.3

10 15 20

40 60

Zoom

mm F

1. Set the Camera Flash to

i-TTL auto flash mode.

● Press the <MODE> button

so that <TTL> is displayed.

FEC：Flash Exposure Compensation

With FEC function, this flash can adjust from -3 to +3 in 1/3rd

stops. It is useful in situations where minor adjusting of the TTL

system is needed based on the environment.

Setting FEC:

1. Press < SET > button. The

flash exposure compensation

amount will blink on the LCD

panel.

2. Set the flash exposure

compensation amount.

• Press the < - > or < + >

button to set the amount.

• To cancel the flash exposure

compensation, set the

amount to “+0.0”. The

amount is not displayed on

the LCD panel.

• The flash exposure compensation amount can only be set in

TTL mode.

• If the camera has also set the flash exposure compensation

amount, the final flash amount is determined by the common

effects of the two amounts.

3. Press < SET > button again to confirm the setting. The flash

exposure compensation amount stops blinking.

TTL

0.5 0.7

1.5

6 9

1.7

2.3

10 15 20

40 60

Zoom

88+

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Godox TT680 N Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info