Bedienungsanleitung GoldenMask 4PRO (Seite 8 von 11) (Englisch)

654673

Zoom out

Zoom in

Vorherige Seite

1/11

Nächste Seite

Golden Mask 4

7. Audio Discriminators

Metal discrimination is obtained through two

audio discriminators.

1. Operation of the Audio Discriminator.

Set the “DISC” key to position “AUDIO”

and the “DISC LEVEL” potentiometer to

position 2-3. Setting “DISC LEVEL” to a

higher position improves metal

discrimination, but at the expense of the

search depth! If you want to discriminate

most non-ferrous metals on the surface

(modern pollutants), the potentiometer must

be set to a position above 7.

When a non-ferrous metal is detected (gold,

silver, copper, bronze) the sound is deep-

toned. When detecting a ferrous metal

(iron), the sound is crackling and

interrupted.

If the “DISC LEVEL” potentiometer is set

to its maximum left position, the

metaldetector starts working in “ALL

METALL” mode without metal

discrimination!

2. Operation of the Multi-tone Discriminator.

Set the “DISC” key to position “MULTI

TONE” and the “DISC LEVEL”

potentiometer to position 2-3. Setting

“DISC LEVEL” to a higher position

improves metal discrimination, but at the

expense of the search depth! If you want to

discriminate most non-ferrous metals on the

surface (modern pollutants), the

potentiometer must be set to a position

above 7.

When a non-ferrous metal is detected (gold,

silver, copper, bronze) the tone is high.

When detecting a ferrous metal (iron), the

tone is low.

If the “DISC LEVEL” potentiometer is set

to its maximum left position, the

metaldetector starts working in “ALL

METAL” mode without metal discrimination!

Recovery Speed of the Metal detector

Golden Mask 4 incorporates electronics,

specifically designed to provide high

recovery speed to enhance the productivity

of the metal detector on highly iron-

contaminated terrains. To attain maximum

recovery speed of Golden Mask 4, set the

“DISC LEVEL” potentiometer to position 2

and the “DISC” switch to “MULTI TONE”.

Search Depth for Metal Objects

The detection depth for metal objects

depends on the position of the “POWER

LEVEL” potentiometer. For maximum

depth, turn the potentiometer to the right

until you reach the audio threshold.

The detection depth for metal objects

depends on a few factors.

1. Size of the object

The greater the surface area of the object,

the higher the detection depth!

2. Orientation of the object with respect

to the search coil

Horizontally positioned coins (objects) are

more easily detectable at greater depths!

3. Soil type

The detection depth is reduced in

mineralized soils and, respectively, the

depth is increased in homogeneous sandy

soils.

4. Discrimination level

Each metal detector, regardless of its brand

and model, obtains maximum depth in a

non-discrimination mode (“ALL METALL”

mode). The higher is the metal

discrimination; the lower is the detection

depth. On low mineralized soils the level of

discrimination has the smallest impact on

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

GoldenMask 4PRO Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info