Bedienungsanleitung Gorenje b 50 pp (Seite 3 von 52) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

329749

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

Verminderte Hintergrundbeleuchtung der Anzeige

Zwischen 22.00 und 5.59 leuchtet die Anzeige nicht so hell

wie tagsüber (wenn die Zeitschaltuhr in dieser Zeit nicht

verwendet wird).

ÄNDERUNGEN, WELCHE DIE FUNKTION DES GERÄTES NICHT BEEINFLUSSEN, BLEIBEN

VORBEHALTEN.

Electronic program timer with sensor probe GB

Electronic timer with sensor probe provides programmed

oven operation and therefore programmed roasting or

baking time.

Special feature of this timer is the probe for measuring

temperature inside the piece of roast.

Timer clock dial is divided to green and red sector.

Green sector displays current daily time or two timer settings

for duration and end of timer operation.

Red sector indicates temperatures.

1. Operation time setting button

2. End of operation setting button

3. Conventional operation setting button

4. Temperature setting button

5. Jog dial

6. Arrows 1-5

Single-handed timer control

Timer clock may be controlled single handed. By pressing

any of the buttons 1 through 4 (and releasing it) you will

switch on the arrow above the selected button, and the arrow

5 above the jog dial 5 starts flashing. Jog dial is used to

select the desired setting within 4 seconds. In case no

setting is selected during these 4 seconds, the function

will not be activated (the display returns back to the current

daily time).

Setting the current time

After connecting the appliance to the mains the green display

indicates flashing 0 00 and arrows 1 and 2 intermittently. The

current time is obtained by pressing buttons 1 and 2

simultaneously (and release them afterwards). The display

indicates 12.00, and arrow # 5 starts flashing. Set the correct

time by turning the jog button. The clock starts running 4

seconds after the last turn of the jog, all the arrows

disappear. The clock has been automatically set to manual

(conventional) mode. In case of power failure, you need

to reset the timer!

Setting the conventional (manual) operation

To be able to use the oven in conventional mode, arrow 3

must not flash, so always check the program timer: in case

the arrow 3 flashes, press the button 3. When the arrow

disappears the oven is set to the conventional (manual)

mode of operation!

Programmed oven operation

By means of program timer the oven operation may be set to

three different modes of operation:

• Semi-automatic: immediate start of oven operation, and

preset automatic stop time;

• Automatic: entirely automatic oven operation preset start

and stop time;

• Automatic with sensor probe: automatic oven operation

and stop time set by the sensor probe when the

temperature in the meat core is obtained.

IMPORTANT!

• In case you wish to interrupt programmed oven operation,

you must first recall the settings back to 0.00 and press

button 3, to make arrow 3 disappear.

• By pressing adequate buttons you may at any time check

and reset your settings.

• Jog dial 5 may be turned either direction.

• In case of power failure new clock setting is required!

Semi-automatic operation

In this mode you determine the period of oven operation

(period of operation).

Maximum setting is 23 hours and 59 minutes!

Procedure:

Example for easier setting procedure:

Let's set the operation period to 1 hour and 20 minutes

(1.20)!

1. Setting the operation period:

Press button 1 (display indicates 0.00 and arrow 5 starts

flashing) and turn jog dial 5 right, until it shows 1.20.

When this is set and you stop turning the jog, after 4

second lapse arrow 5 stops flashing, display indicates

daily current time and arrows 1 and 3 are lit.

2. Turn the oven on:

Use oven buttons to set the heating mode and roasting

temperature.

3. Oven starts operating immediately after turning on (start

of roasting/baking); arrows 1 and 3 are lit during the

operation.

4. After the expiry of preset time - in our case after 1 hour

and 20 minutes -

− the oven stops automatically (roasting/baking is over),

− sound alarm is heard which may be switched off by

pressing any button, or left to switch on automatically

after 2 minutes,

− arrow 1 disappears,

− arrow 3 flashes.

5. Turn the oven off, press button 3 and the arrow 3

disappears!

When the arrow 3 disappears the oven is ready for

conventional (manual) operation.

Automatic operation

In this mode you determine the period of oven operation

(period of operation) and the switching off time (end of

operation).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gorenje b 50 pp Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info