Bedienungsanleitung Gorenje ec 7704 w e b (Seite 14 von 15) (Englisch)

326969

Zoom out

Zoom in

Vorherige Seite

1/15

Nächste Seite

Instructions for use, installation and connection

116

by inserting the screwdriver into

the slot and pull in the direction

of the arrow (see Fig.).

Remember that the bulb is

regarded as consumption

material and is not covered

by the warranty.

Instructions for installation and connection

Safety precautions for the technician

• Installation may be carried out only by qualified personnel.

• The electric installation shall be equipped with a safety

device, able to disconnect the appliance from mains in all

wires, with the distance between contacts of not less than 3

mm in open position. Good protection is provided by the LS-

switches and/or fuses.

• The connection may be carried out by rubber mains lead

(type HO5RR-F with green/yellow earth wire), PVC insulated

mains lead (type HO5VV-F with green/yellow earth wire) or

other cables of equal or better quality.

• Distance between the cooktop and the kitchen hood must be

at least the distance, indicated in the instructions for use of

the kitchen extraction hood.

• Panels, glue and furniture lining from artificial materials,

adjacent to the appliance must be temperature resistant

(>75°C), otherwise they might be deformed.

• Mains lead behind the cooker must be placed in such

manner to avoid touching the back panel of the cooker

because of the heat it develops during operation.

• Remove any packaging materials (foils, artificial foam, nails,

etc.) from the reach of children, because they represent

potential danger. Children may swallow small parts, or

suffocate with foils.

Leveling the appliance and extra support

(certain models only)

The height of the cooker with the support is 90 cm, and

without support it is 85 cm. Left and right side of the support is

equipped with two wheels to facilitate relocation. In the front

part, on both sides there are two adjustable screws, used to

level the cooker and adjust its upper edge in line with the

adjacent kitchen furniture. Adjustable legs are accessible when

the drawer is pulled out. Adjust the position of the cooker by

turning the legs in one direction or another. Adjustable legs will

be turned easier if the appliance is somewhat lifted up and

tilted. Additional support may be removed by unscrewing the

four screws holding it to the bottom of the cooker. In such case

relocate the Some cookers are equipped with four adjusting

screws (two in front and two at the back), used for leveling the

appliance or adjusting its heights to match the adjacent

furniture.

Electric connection

Open the connection box using the screwdriver, as

shown by the drawing on the cover.

Connection to the mains power can be done only by

the authorized service center or by qualified

personnel! Wrong connection may damage the parts of

appliance and render your warranty viod! Connecting

voltage of the user’s installation (230 V against N) must be

verified by qualified electrician using the appropriate tester.

Connector bridges must be positioned in accordance with

the installation connection!

• Prior connecting the appliance, check whether the voltage of

the rating plate corresponds to the actual voltage of home

installation.

• Length of the power lead must be at least 1.5 m so that the

appliance can be connected to power before pushing it

against the wall.

• Length of the earthing lead must be longer than the others,

so that it is strained later than the tension power leads in

case of accidental pullout from the socket.

Procedure

• Using the screwdriver open the connection box cover at the

back of the appliance. You can do so by releasing two

catches, as shown on the connection box cover.

• Power cable must be guided through the relief device,

protecting it from pulling out. If the relief device has not been

fixed yet, fix it in such way to hook the power cable to the

device housing at one end.

• Now connect the power cable in accordance to one of the

options shown on the figure. In case of different installation

voltages, the connection bridges should be rearranged

accordingly!

• Tighten the relief device and close the connection box cover.

NOTE:

In some connection boxes the connector bridges are placed

between contacts 4 and 5, and in the others they are stored at

a designated place within the box. These boxes have the

connection screws already in open position so they need not

be unscrewed. During the tightening procedure you will hear a

faint “click”, meaning that the tightening screw should be

fastened tightly all the way.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gorenje ec 7704 w e b Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info