Bedienungsanleitung Gorenje ecs 610 e (Seite 5 von 6) (Englisch)

335433

Zoom out

Zoom in

Vorherige Seite

1/6

Nächste Seite

Instructions for use, mounting and connection

Mounting the Built-in Hob

• The plywood coating of the kitchen elements should be

processed with temperature resistant adhesives (100°C),

otherwise they may distort or change shape.

• The use of decorative trimmings made of solid wood on the

worktop behind the cooking zone is allowed only in case the

minimum distance is as marked on the drawings for

mounting.

• Cut out the top panel of the kitchen unit into which the

ceramic glass cooktop is to be built into.

• Minimum distance between the built-in cooktop and the rear

wall is marked on the installation drawing.

• Protect the edges of the openings, if necessary.

• Built-in cooktop may be mounted into 30 - 40 mm thick

working tops.

• In case there is a drawer in kitchen cabinet under the built-in

hob, it is necessary to install an additional horizontal barrier

of height 6 cm under the hob and above the drawer.

Mounting dimensions

• Worktop should be perfectly levelled.

• Respect the instructions shown in Fig. 1 regarding

installation.

• Protect the cut edges and openings and insert adequate

packing.

• Insert the appliance into the opening.

• Push firmly the cooktop plate from above and fix it with four

(4) screws from below. Watch the position of mounting

braces: they may differ for 30 mm and 40 mm worktops (Fig.

2 and 2a).

1 worktop

2 built-in cooktop

3 kitchen unit

4 screw

5 metal brace

Electrical connections

• The electric built-in cooker has to be mounted and installed

by a qualified technician. The protection of the electrical

wiring shall comply with current standards and regulations.

• Before connecting the appliance to the power source, make

sure that the voltage stated on the rating plate complies with

the voltage of your power supply.

The rating plate of the ceramic glass hob is fixed on the

lower side of the hob.

• The cooker shall be connected to 230 V AC.

• Electric connections shall be of such design, to incorporate a

protection device between the appliance and the supply, like

fuses or FI switches (to assure at least a 3 mm clearance

between the contacts in open position).

• The connection should be made considering the current

capacity of the installation and the fuses.

• Fire protection is of class Y, which means that the appliance

may be mounted between two kitchen units; one of them

may be higher than the appliance itself, the other has to be

of the same height.

• After mounting, the live parts and insulated parts of the

appliance should be protected against accidental contacts.

• The distance between the ceramic glass hob and the hood

should be at least as stated in the instructions for mounting

the hood.

• No kitchen furniture drawers are allowed to be mounted

below the glass ceramic cooktop.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gorenje ecs 610 e Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info