335435
3
Zoom out
Zoom in
Vorherige Seite
1/13
Nächste Seite
Instructions for use, mounting and connection
18
Mounting the built-in cooktop
Caution !
To avoid any possible hazard, the appliance may be
installed by qualified personnel only.
Panels and furniture lining of the kitchen cabinet receiving
the hob must be treated with temperature resistant
adhesives (100°C), otherwise they might be discoloured or
deformed because of inadequate temperature resistance.
The cooking hob is intended for building into the worktop
above the kitchen element of 600 mm width or more.
After the installation of built-in hob make sure that there is
free access to the two fixing elements in front.
Suspended kitchen elements above the cooktop must be
installed at such distance to provide enough room for
comfortable working process.
The distance between the worktop and the hood must be at
least such as indicated in the instructions for installation of
the kitchen hood, but in no case it may be less than 650
mm.
The smallest distance between the edge of the appliance
and the adjacent high kitchen cabinet is 40 mm.
The use of hard wood decorative borders around the
worktop behind the appliance is allowed, in case the
minimum distance remains as indicated on the installation
illustrations.
Minimum distance between the built-in cooktop and rear wall
is indicated at the illustration for the installation of the built-in
cooktop.
The appliance may be installed in any worktop with a
thickness from 30 mm to 50 mm.
In case there is a drawer in kitchen cabinet under the built-in
hob, it is necessary to install an additional horizontal barrier
of height 6 cm under the hob and above the drawer
Dimensions of the built-in hob opening
Installation procedure
Worktop must be placed absolutely horizontal.
Suitably protect the edges of the cut aperture.
By means of the supplied screws 4 (or 6 by some models)
fasten the supplied tightening brackets 4 (or 6 by some
models) fasten to the front and the rear side of the cooking
hob and to the prepared aperture.
Connect the cooking hob to the mains power supply (see
instructions for the connection of the cooking hob to mains
power supply).
Insert the hob into the cut aperture.
Press the hob firmly towards the worktop from above.
3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

gorenje-ect-600-e

Suche zurücksetzen

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Gorenje ect 600 e wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info