Bedienungsanleitung Gorenje ect 68 c hl (Seite 2 von 14) (Englisch)

334139

Zoom out

Zoom in

Vorherige Seite

1/14

Nächste Seite

Instructions for use, mounting and connection

Important warnings

x The appliance may be built-in and connected to the

power supply only by a qualified technician.

x Particular areas of the cooktop surface (adjacent to

the hotplates) are hot during operation. Prevent the

children to hang around the appliance and warn them

properly against the danger of burns.

x Hot oil ignites readily, so be sure have the

preparation of such food (fries) under constant

control.

x Hotplates may not be left in operation empty, without

any dishes on top.

x Never use the appliance for heating the ambience.

x Never use the ceramic-glass cooktop as a working

surface. Sharp objects may damage the cooktop

surface.

x Preparation of food in aluminum or plastic cookware

is not allowed. Never place any plastic objects or

aluminum foil upon the cooktop surface.

x In case any other appliances are plugged in the

electric mains close to the cooktop, prevent the

contact of the plug cable with the hot cooking zones.

x Never keep any flammable or temperature sensitive

objects, like cleaning agents, sprays, detergents, etc.,

below the appliance.

x Never use cracked or broken ceramic-glass cooktop.

In case you notice any visible cracks on the surface,

cut the power supply immediately.

x In case of any malfunctions, disconnect the appliance

from the power supply and call service department.

x Do not use high-pressure steam cleaner or hot

steam to clean the appliance.

The symbol on the product or on its

packaging indicates that this product may

not be treated as household waste. Instead it

shall be handed over to the applicable collection

point for the recycling of electrical and electronic

equipment. By ensuring this product is disposed

of correctly, you will help prevent potential

negative consequences for the environment and

human health, which could otherwise be caused

by inappropriate waste handling of thisproduct.

For more detailed information about recycling of

this product, please contact your local city office,

your household waste disposal service or the shop

where you purchased the product.

Connection to the power supply

x Connections may be carried out by a qualified

technician only. The earthing protection must comply

with the standing regulations.

x Connection terminals are revealed when the

connection box cover is removed.

x Prior any attempted connection check that the

voltage indicated on the rating plate is in line with your

home power supply.

x The rating plate is located underneath the appliance.

x The appliance is manufactured for use with the

power supply voltage AC 230 V.

x The electric wiring should be equipped with a circuit

breaker able to isolate the appliance from the mains

in all points, with the distance between terminals of at

least 3 mm in open position. This may be done by

means of fuses, safety switches, etc.

x The connection should be selected in accordance

with the declared charge capacity of the mains and

the fuse power.

x Such appliances are allowed to be mounted on one

side next to a high kitchen cabinet, the height of

which may exceed that of the appliance. On the

opposite side however, only a kitchen cabinet of

equal height as the appliance is allowed.

x Upon the completion of installation, live wires and

isolated cables must be adequately protected against

accidental touching.

x Distance between the cooktop surface and the

cooking hood must be such as indicated in the

instructions for use of the hood.

x Kitchen cabinets may not be mounted underneath

the built-in ceramic-glass cooktop.

Basic adjustment of sensors to the

ambience

Upon each connection to the power supply the

sensors of the appliance are automatically

adjusted to the environment to ensure their

proper function. All displays indicate the sign "-".

Once the successful adjustment is completed it is

signaled with a beep, all displays are switched off

and your cooktop is ready for use. During the

adjustment procedure the sensors must be free

of any objects, otherwise the adjustment

procedure will be interrupted until such objects

are removed from the sensor surface. During this

period the regulation of the cooktop is impossible.

ATTENTION !

Before attempting any repairs on the appliance,

disconnect the power supply. In accordance with

the mains voltage the appliance should be

connected in line with the attached diagram. The

earthing wire (PE) must be connected to the

terminal marked with the earthing symbol

The connection cable must lead through the relief

safety device, protecting it from accidental pulling

out. Upon the completion of installation switch all

the hotplates on for about 3 minutes to check the

proper functioning.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gorenje ect 68 c hl Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info