Bedienungsanleitung Gorenje WT911 (Seite 6 von 10) (Englisch)

512899

Zoom out

Zoom in

Vorherige Seite

1/10

Nächste Seite

129737

Instructions for Use 19

resistant laundry (5 programs), with

automatic moisture measuring

delicate laundry (4 programs) with

automatic moisture measuring

preset drying time for both resistant and

delicate laundry

The drying temperature is selected automatically

by the selection of the drying program, and it is

lower for delicate laundry than for the resistant

one. During the drying program with preset time

the temperature is the same for both the delicate

and resistant laundry.

Drying stage indicator

Damp for machine ironing

Damp for ironing

Mildly damp

Dry for storage

Very dry

Against crease

End

The drying stage indicator displays the actual

drying stage at any given moment. This is

signaled by the indicator light, illuminated

adjacent to a particular drying stage symbol. The

end of drying is signaled by the indicator light

END or ANTI-CREASE..

START button

Starts the operation of the appliance. In case of

program interruption (open door, voltage failure,

condensation receptacle full), it serves to

continue the actual program, after the cause for

interruption had been removed.

Drying

Drying time depends upon the selected program

and the quantity of laundry. If you selected time

defined drying the machine stops upon the expiry

of set time. If you selected any of the programs

for automatic determination of moisture, drying

time will largely depend upon the quantity of

laundry and the extent of moisture present in the

laundry (spin stage).

Actual stage of moisture during the program is

indicated by the moisture stage display, so you at

any time may remove particular pieces of clothes

you wish to remain damp. When you open the

door (add or remove pieces of laundry) the drying

program stops and the drum interior is

illuminated. When you close the door the light

goes off and the program continues by pressing

the START button.

In case of voltage failure during the program, the

drying operation stops. When the mains supply is

back you need to press the START button to

continue the program.

Each program is finished by a 10 minute cooling

down period, to prevent extracting of hot laundry

from the appliance and to improve the anti-crease

function.

Drying program is completed when the beep

sounds and the indicator lights END and ANTI-

CREASE are lit. This indicates that the laundry is

dried up to the point of preset moisture stage, or

the preset drying time had expired. The drum

stops and laundry may be removed from the

machine.

In case laundry was not removed after the

completion, and the machine was not switched

off, it automatically starts a special anti crease

program. This program occasionally turns the

drum in either direction to prevent the laundry to

drop and settle to the bottom and get creased.

The program stops automatically after one hour,

but it may be interrupted at any moment by

opening the door or turning the appliance off.

Signal lamp – condensation vessel

(only with condensation type dryer)

The lamp is lit when the vessel is full, and it stops

the drying program. Once the receptacle is

emptied and reinserted, the drying program may

be continued by pressing the START button.

After drying - condensation type dryer

x Open the dryer door.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gorenje WT911 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info