590620
80
Zoom out
Zoom in
Vorherige Seite
1/84
Nächste Seite
80 GMC-I Messtechnik GmbH
Accessories
11 Accessories
11.1 General
The extensive accessories available for our measuring
instruments are checked for compliance with currently valid safety
regulations at regular intervals, and are expanded as required for
new applications. Currently up-to-date accessories which are
suitable for your measuring instrument are listed at the following
web address along with photo, order number, description and,
depending upon the scope of the respective accessory, data
sheet and operating instructions: www.gossenmetrawatt.de
( Measuring Technology – Portable Digital Multimeters
METRAHIT ... Multimeter Accessories).
11.2 Technical Data for Measurement Cables
(scope of delivery: KS29 safety cable set)
Electricity Safety
Maximum rated voltage,
measuring category 1000 V CAT III
Max. rated current 16 A (with safety caps applied 1 A)
Ambient Conditions (EN 61010-031)
Temperature 20 °C ... + 50 °C
Relative humidity 50 ... 80%
Pollution degree 2
Application
Attention!
!
In conformity with standard DIN EN 61010-031, mea-
surements in an environment according to measuring
category III may only be performed with the safety caps
applied to the test probes of the measurement cables!
Please observe the maximum values of the electrical safety of
the instrument (DMM).
For establishing contact in 4 mm jacks you have to remove the
safety cap by levering out the snap lock of the safety cap with ano-
ther sharp object (e. g. the second test probe).
11.3 NA X-TRA Power Pack (not included)
Use power packs from GMC-I Messtechnik GmbH only in
combination with your instrument. This assures operator safety by
means of an extremely well insulated cable, and safe electrical
isolation (nominal secondary ratings: 5 V / 600 mA). Installed bat-
teries are disconnected electronically if the power pack is used,
and need not be removed from the instrument.
In the multimeter operating mode, capacitive coupling of the
Z218G power pack may lead to an increased measuring error.
We therefore recommed battery operation for the measurement
of capacitance and AC quantities.
80

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Gossen Metrawatt METRACAL MC wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info