590622
5
Zoom out
Zoom in
Vorherige Seite
1/36
Nächste Seite
GMC-I Messtechnik GMBH 5
GB
1 Application
METRA HIT27EX is a milliohmmeter with 4-pole measure-
ment, which is designed for deployment in potentially
explosive environment.
In accordance with directive 94/9/CE dated 23th March
1994 the device is approved for being used in explosive,
gaseous atmospheres (IIA T4) with ambient temperatures
between –10 °C and +50 °C.
The device conforms to the following standards:
EN 60079-0:2009 and EN 60079-0:2012
EN 60079-11:2012
It bears CE certification number, type INERIS 05ATEX0040,
which has been conferred by the Ineris certification authority.
2 Safety Features and Precautions
You have selected an instrument which provides you with
high levels of safety.
This instrument fulfills the requirements of the applicable
European and national EC guidelines. We confirm this with
the CE marking. The relevant declaration of conformity can
be obtained from GMC-I Messtechnik GMBH.
The METRA HIT27EX is manufactured and tested in
accordance with safety regulations IEC 61010–1:2010 /
EN 61010–1:2010/VDE 0411–1:2011/EN 60079-0:2009
and
EN 60079-0:2012/EN 60079-11:2012. When used for its
intended purpose, safety of the operator, as well as that of
the instrument, is assured. Their safety is however not
guaranteed, if the instrument is used improperly or handled
carelessly.
In order to maintain flawless technical safety conditions, and to
assure safe use, it is imperative that you read the operating
instructions thoroughly and carefully before placing your instru-
ment into service, and that you follow all instructions contained
therein.
Use for Intended Purpose:
The milliohmmeter described herein is a portable
instrument which can be held in one hand during mea-
surements.
The milliohmmeter may only be operated with the
included or with type-tested batteries, as specified in
the Characteristic Values.
The milliohmmeter may only be operated with closed
housing. The instrument must be removed from the
potentially explosive environment before opening the
housing to replace batteries or fuses.
Only the type-tested fuses specified in the Characteris-
tic Values may be used.
The milliohmmeter may only be used to perform such
measurements as described in chapter 7.
The limits of the overload capacity may not be
exceeded. Refer to the “Characteristic Values” on
page 26 for overload values and overload duration.
5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Gossen Metrawatt METRAHIT 27EX wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info