Bedienungsanleitung Gossen Metrawatt METRISO 1000A (Seite 3 von 10) (Englisch)

590651

Zoom out

Zoom in

Vorherige Seite

1/10

Nächste Seite

GMC-I Messtechnik GmbH 3

Contents Page

1 Safety Precautions .......................................................................... 3

2 Applications .................................................................................... 4

3 Initial Start-Up ................................................................................ 4

3.1 Battery Installation ...........................................................................................4

3.2 Testing the Batteries .......................................................................................4

3.3 Switching the Tester On and Off .......................................................................4

3.4 Analog Display ................................................................................................4

3.5 Fusing ............................................................................................................4

3.5.1 Checking the Fuse ..........................................................................................4

4 Measuring Direct and Alternating Voltage ...................................... 5

5 Measuring Insulation Resistance .................................................... 5

5.1 Measurement Procedure .................................................................................5

5.2 Evaluation of Measurement Values ...................................................................6

5.3 Rapid Testing of Insulation Resistance ..............................................................6

6 Measuring Low-Impedance Resistance (0 to 4 Ω) ......................... 6

7 Characteristic Values ..................................................................... 7

8 Maintenance ................................................................................... 8

8.1 Batteries .........................................................................................................9

8.2 Replacing the Fuse ..........................................................................................9

8.3 Testing for Functionality and Accuracy ..............................................................9

8.4 Housing ..........................................................................................................9

8.5 Carrying Bag .................................................................................................10

9 Repair and Replacement Parts Service

Calibration Center

and Rental Instrument Service ..................................................... 10

10 Product Support ............................................................................ 10

1 Safety Precautions

This instrument fulfills the requirements of the applicable European and

national EC guidelines. We confirm this with the CE marking. The relevant

declaration of conformity can be obtained from GMC-I Messtechnik

GmbH.

The METRISO 1000A insulation tester has been manufactured and tested

in accordance with the following standards:

IEC 61010-1/EN 61010-1/VDE 0411-1,

DIN VDE 0413 part 1:2007 and part 4:2007,

IEC 61557-2/EN 61557-2/VDE 0413-2

IEC 61557-4/EN 61557-4/VDE 0413-4

In order to maintain flawless technical safety conditions and to assure safe

use, it is imperative that you read the operating instructions carefully and

thoroughly before placing your instrument into service, and that you follow

all points contained therein.

Repair and Parts Replacement

Voltage conducting parts may be exposed when the instrument is

opened. The instrument must be disconnected from all sources of voltage

before repair or replacement of parts. If the repair of an open, live instru-

ment cannot be avoided, this may only be performed by trained personnel

who are familiar with the dangers involved.

Malfunctions and Extraordinary Strains

If it may be assumed that the instrument can no longer be operated

safely, it must be removed from service and secured against unintentional

use. Safe operation can no longer be relied upon:

• If the instrument demonstrates visible damage

• If the instrument no longer functions

• After lengthy periods of storage under unfavorable conditions

• After excessive strain during transport

Attention!

The permanently attached measurement cables are double insu-

lated with insulation materials of two different colors. Exposure of

the light colored inner insulation is an early indicator of excessive

cable wear.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gossen Metrawatt METRISO 1000A Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info