Ambient light measurement
Shutter priority mode
Select t with function buttons and set desired
shutter speed with value buttons
Measure by pressing the M button
The measured aperture appears
Contrast measurement
Select t with the function buttons
Keep the M button depressed while aiming the
meter at various areas of the subject
After the measuring button is released, the
entire measured contrast range is displayed on
the analog aperture scale
Aperture priority mode
Select f with the function buttons and set the
desired aperture with the value buttons
Measure by pressing the M button
The measured shutter speed appears in the
right-hand digital display
Exposure value
Select EV with the function buttons
Measure by pressing the M button
The measured exposure value appears in the
left-hand digital display
Setting the film speed
Select ISO with the function buttons and adjust
the required ISO value with the value buttons
Measuring function
Flash readings
Readings can be taken with or without
synchronizing cable
Select with the function buttons
Adjust the desired synchronizing speed with
the value buttons
(1 s to 1/1000 s; including 1/90)
Press the measuring button M and trigger the
flash
The measured aperture stop appears in the left
digital display and as a flashing mark on the
analog aperture scale. The aperture stop for
the level of ambient light is additionally
indicated on the analog aperture scale
