558281

Grasslin Talento 882 pro Seite 2

2
Zoom out
Zoom in
Vorherige Seite
1/2
Nächste Seite
11. SelectCHANNEL ON:YESorNO
SelectYEStosetthetimeperiod(hoursandminutes)during
whichthetimeswitchshouldswitchonagain.
23h
Sunrise
ON OFF ON OFF
Sunset 5h
SelectNOifthenight-timeswitch-offshouldlasttothenext
sunset.
23h 23h
ON OFF ON OFF
Sunset
Sunset
Channel ON: YES
12. EnterhourandminutefortheONcommand(+/-)
OK
Theprogramissaved.
Creating a holiday program
A
ON/OFF programming
ForCYCLEandPULSE,youalsohavetosetthedurationand/or
period.
IfONisset,youcanselectthedaysoftheweekonwhichthe
timeswitchisswitchedoffduringholidays.
Theprocedureisthesameasforcreatingaweeklyprogram.
Random switching program
1)
Theprogrammedswitchingcommandisdelayedbyavariable(random)
periodof0-30minutes..
PressOKtostarttherandomswitchingprogram.
RANDOMashes.
Finish random switching program
PressDELtonishtherandomswitchingprogram.
ThetimerreturnstoAutomaticmode.
TAXIMODE – Transmission of programs
• Ahandheldprogrammingdevicecanbeusedtoexchangeprograms
viatheIRinterface.Todoso,thedevicemustbeintheTAXIMODE
andconnectedtopower.
• PressESCtonishtheTAXIMODE..
Operationofhandheldprogrammingdevice:
1. PressPROGtoselecttheprogramnumber.
2. PressINtoreadinaprogram.
PressOUTtoreadoutaprogram.
3. Holdthehandheldprogrammingdevice
verticallyovertheIRinterface.
4. PressingINorOUTagainwillstartthetransmission.
AwrongtransmissionisshownbyEr2.
Forfurtherinformation,seetheseparateoperatingmanual
“handheldprogrammingdevice”.
EXT I/P – External input
I/P COUNT – Pulse counter
SelectI/P COUNTtocheckthepulse
counter.Itwillcounthowmanytimes
theexternalbuttonwaspressed.
PressREStoresetthepulsecounter
tozeroandconrmbypressingYES.
EXT O/R – Manual switch
SelectEXT O/Rtoassignachannel
toanexternalbutton.
Uponpressingthebutton,an
overrideswitchingcommandwill
beexecuted.Itwillbeineffect
untilthenexttimethebuttonis
pressedoruntilthenextautomatic
switchingcommand.
COUNTDOWN – Countdown timer
SelectCOUNTDOWNtosetthe
timeforacountdowntimer.
Uponpressingthebutton,an
ONswitchingcommandwillbe
carriedout.Itswitchestheselected
channelONforthesettime.
Pressingthebuttonagainwillstart
thecountdowntimeragainatthe
settime.
Ifaprogramisalreadyrunningontheselectedchannel,noswitching
commandwillbeexecuted!Afterthetimehasexpired,thetimerreturns
toAutomaticmode.
ShortestONswitchingduration:30seconds
LongestONswitchingduration:90minutes
Countdowntimerandmanualswitchcannotbeselectedatthe
sametime!Thefunctionselectedlastalwaysapplies.
View and edit program
Weekly,yearly,holiday
andastroprogramscan
beviewedandedited
separately.
• Press
toscroll
throughthedifferent
programsteps.
• PressEDTtoedita
program.
Thisprocedureis
similartocreatinga
newprogram.
Delete program
Delete all programs
• PressYEStodeleteall
programs.
• PressNOtodeleteindividual
programs.
Delete individual programs
• Press
toscrollthroughthe
differentprogramsteps.
Conguration
ASTRO – Astro settings
1)
ClicktheCOUNTRYmenuitemto
selectthedesiredcountryandcity.
Thelongitudesandlatitudesare
generatedautomatically.
Ifthedesiredcityisnotincludedin
thelist,youcanmanuallysetthe
longitudesandlatitudesviathe
LAT/LONmenuitem.
Creating an ASTRO program
1)
Thefollowingsettingsarepossible:
SUNSETON
SUNRISEOFF
ThetimeswitchswitchesONatsunsetand
switchesOFFatsunrise
SUNSETOFF
SUNRISEON
ThetimeswitchswitchesOFFatsunsetand
switchesONatsunrise
SUNRISEPULSE ThetimeswitchswitchesONatsunrisefora
certaintime(pulse)
SUNSETPULSE ThetimeswitchswitchesONatsunsetfora
certaintime(pulse))
SUNRISE
SUNSET
PULSE
ThetimeswitchswitchesONatsunriseand
sunsetforacertaintime(pulse)
Sunset ON / Sunrise OFF
1. Conrm SUNSET ON / SUNRISE OFFbypressingOK.
Freememorylocationsarebrieydisplayed.
2. Whenprompted,selectAstro-settings.
3. Whenprompted,selectchannels
andconrmbypressing .
OK
Theweekdaydisplayisashing.
ON command:
4. Selectthedesireddays
andconrmbypressing
OK
5. Enterstartdate(monthandday)intherelevantbox(+/-)
OK
6. Enterstopdate(monthandday)intherelevantbox(+/-)
OK
7. EnterminutesfortheOFFSET(+/-)
OK
OffsetcanbeusedtooffsettheONandOFFswitchingtimesof
theAstroprogram.Thisisdoneinordertoadaptthemtothe
localconditions.
ExampleSUNSET ON / SUNRISE OFF:
Offset=+00:15ThetimeswitchswitchesON15minutesafter
thecalculatedsunsetandswitchesOFF15minutesafterthe
calculatedsunrise.
8. Selectthe OFF PERIOD: YESorNO
SelectYEStosetthetimeperiod(hoursandminutes)
duringwhichthetimeswitchshouldswitchoff,e.g.
night-timeswitch-offfrom23-5h.
SelectNOtosetnoOFFperiod.
OFF period: YES
9. EnterhourandminutefortheOFFcommand(+/-)
OK
10. Whenprompted,selectdesireddays
andconrmbypressing
OK
LIGHT – Background illumination
• SelectFIX ONtoset
thebackgroundlighting
permanently.
• Select2 MINifyouwantthe
backgroundlightingtobe
automaticallyswitchedoff2
minutesafteryourlastinput.
PIN – Set PIN
• Press
+ -
tosetanumeric
value.
• PressOKtosetthenextnumber.
• SelectNO PIN,toremovethe
PIN.
HCOUNTER – Set hour counter
• Press
toselectthe
channels.
• SelectREVIEWtocheckthehour
counter.
• Press
toscrollthroughthe
differentprogramsteps
• PressREStoresetthehour
counterforthischannel.
HCOUNTER – Set service counter
Youcansetthenumberof
operatinghoursafterwhicha
servicemessageistoappear.It
willbeshownonthedisplayas
soonasthecounterhasreached
thenumberofhourssetbyyou.
• Press
toselectthe
channels.
• Press
+ -
tosetanumeric
value.
Maintenance and repair
Battery change
Beforechangingthebattery,thedevicemustbedisconnectedfromthe
powersupply!Dateandtimewillbelost!
1. Liftthebatterycompartmentusinga
screwdriver.
2. Takethebatteryoutofthesupport.
3. Insertnew(LithiumbatterytypeCR2450)
batteryintosupport.
Observepolarityofthebattery!
4. Pushbatterysupportdownwarduntilit
engages.
5. Disposeofthebatteryinan
environmentallyfriendlymanner.
Disposal / Recycling
Disposeofthepackingmaterialcorrectlyaccordingtolegal
requirementsandregulations.
Observethefollowingnotesfordisposingofdefectivesystem
componentsorthesystemafteritsservicelife:
• Disposeofappropriately,i.e.separatingthepartstobedisposedof
accordingtomaterialgroups.
• Donotthrowelectricalandelectroniccomponentsinthebin.Bring
thesepartstotherecyclingcenters.
• Alwaysensuretheenvironmentallysounddisposalconformtothe
state-of-the-artenvironmentprotection,recyclinganddisposal
engineering.
Automatic/Manual mode
• Manualswitch:DurationON/DurationOFF/OVR/Automaticmode
• Leftbutton=channel1/Rightbutton=channel2
Press1x=FIXON=
DurationON
Press2x=FIXOFF=DurationOFF
Press3x=OVR=Overridemode
Press4x=Automaticmode
Override mode
TheOverridefunction(temporaryprogram
overwrite)allowstheusertoswitchONorOFFearly.Thisdependson
thecurrentchannelstatus.TheOverridefunctionappliesonlytothe
currentprogramandremainsactiveuntilthenextprogramchange.
Afterthat,thetimerreturnstoAutomaticmode.
1)
Functionnotavailableforallproducts.
2)
 AvailableonlyifindividualdayshavebeenselectedfortheON
command.
4)
 OnlyappearswhentheAstro-settingsarenotset.
ESC OK
1612 18 24
15:26
1
1 OFF ON 2
2
OVRFIX
ESC OK
1612 18 24
15:26
1
1 OFF ON 2
2
MINUTES OFFSET
OK
OFF PERIOD
HOUR CHL OFF
MIN CHL OFF
YES
OK
OK
CHL ON
HOUR CHL ON
YES
OK
MIN CHL ON
SAVED
OK
MENU
PROGRAM
NEW
HOLIDAY
ON/OFF
PULSE
CYCLE
OFF
OK
OK
OK
A
RANDOM
OK
RANDOM
DEL
MENU
RANDOM
OK
RANDOM
OK
7:00 20:00
OFF
ON
7:30 20:30
MENU
CONFIG
OK
TAXIMODE
LIGHT
PIN
HCOUNTER
EXT I/P
ASTRO
1)
TAXXI
out
prog
in
RS232
EXT I/P
I/P COUNT
OK
OK
I/P
00000
OK
EXT I/P
EXT O/R
OK
OK
SELECT
CHANNEL
1)
OK
EXT I/P
COUNTDOWN
OK
OK
SELECT CHL
1)
OK
DURATION
MIN:SEC
OK
DELETE
DELETE ALL
ONO PO01
OK
NO
DEL
CONFIRM
YES
MENU
PROGRAM
DELETE
DELETE ALL
CONFIRM
OK
OK
YES
YES
MENU
PROGRAM
REVIEW
ALL
ONO P001
CHANNELS
1
OK
OK
OK
EDT/OK
ASTRO
COUNTRY
OK
OK
OK
UNITED KINGDOM
LONDON
OK
PIN
PIN
OK
OK
PIN
0000
OK
LIGHT
FIX ON
2 MIN
OK
OK
HCOUNTER
SELECT
OK
OK
SELECT
CHANNEL
1)
OK
HCOUNTER
SERVICE
OK
OK
CHANNEL
1)
OK
HOURS
00000 H
SERVICE
OK
MENU
PROGRAM
NEW
ASTRO
SUNSET ON
SUNRISE OFF
OK
OK
OK
OK
SUNSET ON
SUNRISE OFF
OK
ASTRO
4)
OK
SELECT CHL
1)
OK
DAY CHL ON
MONTH START
DAY START
MONTH END
DAY END
OK
OK
OK
OK
OK
ON/OFF
OK
SELECT CHL
1)
DAY CHL ON
MONTH START
DAY START
MONTH END
OK
OK
OK
OK
OK
DAY END
OK
HOUR CHL ON
MIN CHL ON
OK
OK
DAY CHL OFF
2)
OK
HOUR CHL OFF
MIN CHL OFF
SAVED
OK
OK
talento_471-472-791-792-881-882_pro_EN_A3.indd 2 16.02.2012 10:40:04
2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Grasslin Talento 882 pro wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Grasslin Talento 882 pro

Grasslin Talento 882 pro Bedienungsanleitung - Deutsch - 28 seiten

Grasslin Talento 882 pro Bedienungsanleitung - Deutsch - 2 seiten

Grasslin Talento 882 pro Bedienungsanleitung - Englisch, Holländisch - 28 seiten

Grasslin Talento 882 pro Bedienungsanleitung - Holländisch - 2 seiten

Grasslin Talento 882 pro Bedienungsanleitung - Dänisch, Französisch - 28 seiten

Grasslin Talento 882 pro Bedienungsanleitung - Französisch - 2 seiten

Grasslin Talento 882 pro Bedienungsanleitung - Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch - 28 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info