Bedienungsanleitung Greenworks G24AC (Seite 4 von 147) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Finnisch)

708284

Zoom out

Zoom in

Vorherige Seite

1/147

Nächste Seite

English

balance at all times. Proper footing and balance

enables better control of the tool in unexpected

situations.

k. Do not use on a ladder or unstable support.

Stable footing on a solid surface enables better

control of the tool in unexpected situations.

l. This appliance can be used by children aged from 8

years and above and persons with reduced physical,

sensory or mental capabilities or lack of experience

and knowledge if they have been given supervision

or instruction concerning use of the appliance in

a safe way and understand the hazards involved.

Children shall not play with the appliance. Cleaning

and user maintenance shall net be made by children

without supervision.

4. TOOL USE AND CARE

a. Do not exceed the pressure rating of any

component in the system.

b. Protect material lines and air lines from damage

or puncture. Keep hose and power cord away from

sharp objects, chemical spills, oil, solvents,

and wet oors.

c. Check hoses for weak or worn condition before

each use, making certain all connections are

secure. Do not use if defect is found.

d. Purchase a new hose or notify an authorized

service center for examination or repair.

e. Release all pressures within the system slowly.

Dust and debris may be harmful.

f. Store idle tools out of the reach of children and

other untrained persons. Tools are dangerous in

the hands of untrained users.

g. Maintain tools with care. Follow maintenance

instructions. Properly maintained tools are easier

to control.

h. Check for misalignment or binding of moving

parts, breakage of parts, and any other condition

that may affect the operation of the tool. If damaged,

have the tool serviced before using.

i. Many accidents are caused by poorly maintained tools.

j. Never point any tool toward yourself or others.

k. Keep the exterior of the air compressor dry, clean,

and free from oil and grease. Always use a

clean cloth when cleaning. Never use brake uids,

gasoline, petroleum-based products, or any strong

solvents to clean the unit. Following this rule will

reduce the risk of deterioration of the enclosure plastic.

5. SERVICE

a. Tool service must be performed only by qualied

repair personnel. Service or maintenance

performed by unqualied personnel may result in a

risk of injury.

b. Disconnect power supply, open drain valve to

decompress tank and allow water to drain, and

allow air compressor to become cool to the touch

before servicing. Turn pressure regulator knob

fully counterclockwise after shutting off compressor.

c. When servicing, use only identical replacement

parts. Follow instructions in the Maintenance section

of this manual. Use of unauthorized parts or failure to

follow Maintenance instructions may create a risk

of injury.

SPECIAL SAFETY RULES

1. Know your air compressor. Read operation manual

carefully. Learn its applications and limitations, as well

as the specic potential hazards related to this tool.

Following this rule will reduce the risk of electric shock,

re, or serious injury.

2. Drain tank of moisture after use each day. If unit will

not be used for a while, it is best to leave drain valve

open until such time as it is to be used. This will allow

moisture to completely drain out and help prevent

corrosion on the inside of tank.

3. Risk of re or explosion. Do not spray ammable

liquids in a conned area. Spray area must be well

ventilated. Do not smoke while spraying or spray

where spark or ame is present. Keep compressors

as far from the spraying area as possible, at least

4.6 m from the spraying area and all explosive vapors.

4. Risk of bursting. Do not adjust regulator to result

in output pressure greater than marked maximum

pressure of attachment and/or the item being inated.

Never use at pressure greater than 8 bar.

5. Use an air pressure gauge periodically while

inating an item to check the air pressure.

6. The machine shall be connected to a circuit

protection device (fuse or circuit breaker). The

protection device shall be set at 10 A current, and

the user shall do necessary test according to clause

18.2.2 of EN 60204-1:2006 to check if the protection

device is suitable for use.

7. To reduce the risk of electric shock, do not expose

the machine to rain (water) or dust; store it indoors.

8. Inspect tank yearly for rust, pin holes, or other

imperfections that could cause it to become

unsafe. Never weld or drill holes in the air tank.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Greenworks G24AC Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info