Bedienungsanleitung Grizzly EHS 600-61 R (Seite 107 von 136) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Polnisch, Türkisch)

505485

107

Zoom out

Zoom in

Vorherige Seite

1/136

Nächste Seite

107

center will be glad to provide you with

a cost estimate.

We can only process devices which

have been packaged sufciently and

which have been dispatched with cor-

rect stamping.

• Note: In case of complaint or service,

please deliver your device cleaned,

and with an indication of the defect, to

our service address.

Devices sent in freight collect - by

bulk freight, express or with other

special freight - are not accepted.

• Defective units returned to us will be

disposed of for free.

Spare Parts

Replacement parts may be ordered di-

rectly from our Service Centre.

When ordering, always specify the ma-

chine type and the part number in the

exploded drawing.

Technical Data

Hedge Trimmer ............... EHS 600-61 R

Input voltage rating ..... 230-240 V~, 50 Hz

Input powe ...................................... 600 W

Safety class ........................................ II

Degree of protection .......................... IP20

Idling rotation speed .................. 1400 rpm

Weight ..........................................2,85 kg

Cutting length .............................. 550 mm

Cutting capacity ............................. 20 mm

Acoustic power level (L

)

guaranteed ..................................100 dB (A)

measured .......... 97,2 dB(A); K

=2,77 dB

Sound pressure level

) .....................89,8 dB (A); K

=2,77 dB

Vibration at the

handle (a

) ............. 2,95 m/s

; K

=1,5 m/s

bow handle (a

) ...... 1,99 m/s

; K

=1,5 m/s

Noise and vibration values have been de-

termined according to the standards and

regulations named in the declaration of

conformity.

Technical and optical alterations may be

made without notice for the purposes of

improvement. No guarantee can be given

for the accuracy of dimensions, notices

and specications stated in this manual.

The manufacturer shall therefore not ac-

cept liability for statutory claims arising

from the manual.

The stated vibration emission value was

measured in accordance with a standard

testing procedure and may be used to

compare one power tool to another.

The stated vibration emission value may

also be used for a preliminary exposure

assessment.

 Warning:

The vibration emission value may

differ during actual use of the

power tool from the stated value

depending on the manner in which

the power tool is used.

Safety precautions aimed at pro-

tecting the user should be based

on estimated exposure under

actual usage conditions (all parts

of the operating cycle are to be

considered, including, for example,

times during which the power tool

is turned off and times when the

tool is turned on but is running

idle).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Grizzly EHS 600-61 R Seite 107

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info