34
Problem
Screen lit (snow or blue),
but no picture
Poor contrast
No colour
Sound unclear
Ghosting, reflection
Picture but no sound
Teletext impaired or absent
Remote control does not
work
Parental control warning
appears when switched on
You cannot understand the
menu language
No picture/sound on AV
preset (SCART socket)
INFORMATION_____________________________________
Possible cause
Antenna cable
Picture settings shifted
Problem at station
Colour intensity too low
TV standard setting (if
setting option is available)
Problem at station
Sound setting
Channel setting
Antenna
Volume turned down or
speaker switched off
Audio control via RCA
audio sockets activated (if
this option is available)
Problem at station
Television station has no
teletext or antenna system
Station signal too weak
(picture interference)
No optical connection
Remote control batteries
Operating mode undefined
Parental control has been
activated
Wrong menu language set
The SCART cable is not con-
nected correctly
Remedy
Antenna cable connected?
Check antenna?
Adjust the brightness, con-
trast or colour setting
Test with a different channel
Turn up the colour
Select the correct colour
standard
Test with a different channel
Correct the sound setting
Automatic or manual tun-
ing/fine tuning
Have antenna cable or sys-
tem checked
Turn up or switch on the vol-
ume
Select sound output via
loudspeaker
Test with a different channel
Test with a different channel,
fine tuning may eliminate
ghosting or reflections
Check antenna
Point remote control at tele-
vision
Check the batteries, change if
necessary.
Ensure correct
polarity
Switch off the television with
the power button for 2 min-
utes
Enter secret number or
number combination
7038580.
Select the »Language« menu
with »i«, »3«, »OK« and
set the correct language
Plug in the cable properly
Troubleshooting
If the remedies given below do not work, please consult an autho-
rised GRUNDIG dealer. Please bear in mind that malfunctions can
also be caused by external devices such as video recorders or satel-
lite receivers.
Note:
This is a Class A product. During operation the device can cause
radio interference. In this case the user may have to remedy this.
Please contact your specialist dealer.
