ķ
21
❒
Mains voltage:
220-240 V, 50/60 Hz
(Power supply range control 190 … 264 V)
»The set may only be operated supplied power cable
set. It prevents interference from the mains and is an
integral component for the set’s approv-al«.
For a replacement, consult your nearest customer
service centre and order only the power supply
cable set with the following designation » GWN
9.22/ number 8290.991-316«.
❒
Power consumption:
approx. 130 W, on standby 7 W
❒
Channel coverage:
Channels C01 … C99, Special channels S01 … S41
❒
Additional equipment:
The set has been prepared for satellite reception,
connecting a PC and PIP (Picture in Picture). With
the built-in PIP function, another TV programme or
an AV picture (e.g. from a video cassette recorder or
a video camera) can be superimposed as a small
picture. Ask your dealer.
❒
Sound output:
2 x 20 W active musicial output (2 x 10 W Sinus)
Notes on the environment by Grundig
Technology and ecology combine into a convincing
overall concept with this TV set. Ecologically high-
quality materials are used exclusively. The housing
contains a high amount of recyclable parts from
used plastics and the surface colours used are
water-based, partly recycled. Wherever possible,
painting of individual housing parts has been omit-
ted. Due to the optimized housing construction,
flame protection materials have been omitted. The
number of plastic types has been reduced through
and through in order to ensure high-quality recy-
cling when the set is put out of use – all larger
plastic parts are marked. For optimum re-use, this
TV set has been constructed in such a way as to
make dismantling very easy.
❒
Pin assignment for the EURO-AV socket
If you want to connect other devices to your televi-
sion (for example, a computer or amplifier), your
dealer can provide you with a normed standard
connection by means of the following table:
Pin Signal
11 = Audio ouput, right
12 = Audio input, right
13 = Audio output, left
14 = Audio earth
15 = Blue, earth
16 = Audio input, left
17 = RGB blue input
18 = Switching voltage
19 = Green earth
10 = Data line MEGALOGIC
11 = RGB green, input
12 = –
13 = Red, earth
14 = Earth
15 = RGB red input (chrome for S VIDEO)
16 = RGB switching voltage
17 = Video earth
18 = RGB switching voltage, earth
19 = Video output
20 = Video input
21 = Shielding/earth
The product fulfils the requirements of the
following EU guidelines:
73/23/EEC Guideline concerning electrical operating
units within certain voltage limits.
89/336/EEC guideline on electro-magnetic compa-
tibility.
The unit is accordance with the norms:
EN 60065, EN 55013, EN 55020
Technical Specifications
All rights reserved!
Additional Information for Units sold in Great Britain
Units sold in GB are suitable for operation from a 240 V AC, 50 Hz mains supply.
In case this appliance is supplied with a Safet
y Standard Approved mains lead fit-
ted with a non-rewireable 13 Amp mains plug which, if unsuitable for your
socket, should be cut off and an appropriate plug fitted by a
qualified electrician. The fuse and fuse holder must be removed from the plug as
accidental insertion of the redundant plug into a 13 Amp socket is likely to cause
an electrical hazard.
Note: The severed plug must be destroyed to avoid a possible shock hazard
should it be inserted into a 13 Amp socket elsewhere.
If it is necessary to change the fuse in the non-rewireable plug, the correct type
and rating (5 Amp ASTA or BSI approved BS 1362) must be used and the fuse
cover must be refitted. If the fuse cover is lost or damaged the lead and plug must
not be used until a replacement is obtained. Replacement fuse covers should be
obtained from your dealer.
If a non-rewireable plug or a rewireable 13 Amp (BS 1363) plug is used, it must
be fitted with a 5 Amp ASTA or BSI approved BS 1362 fuse. If any othe type of
plug is used it must be protected by a 5 Amp fuse either in the plug or at the dis-
tribution board.
Important:
The wires in the mains lead are coloured in accordance with the follow-ing code:
BLUE – NEUTRAL
BROWN – LIVE
As the colours of the wires in the mains lead of your appliance may not corre-
spond with the coloured marking identifying the terminals in your plug, proceed
as follows:
Connect the BLUE coloured wire to plug terminal marked with the letter "N" or
coloured black.
Connect the BROWN coloured wire to the plug terminal marked with a letter "L" or
coloured red.
In no circumstance must any of the wires be connected to the terminal marked
with a letter "E", earth symbol , coloured green or green and yellow.
Replacement mains lead can be obtained from your dealer.
