ENGLISH
15
SETTINGS
__________________________
Setting the clock
When you switch on the device for the first time, the time flashes in the
display to indicate that you must set the clock. The same thing applies after
a power failure, or if the device has been plugged out and no back-up
battery is inserted.
1 Press and hold down »TIME«.
2 Press »HOUR« briefly to set the hours step-by-step or hold it down to
run through the hours quickly.
3 Press »
MIN
« briefly to set the minutes step-by-step or hold it down to
run through the minutes quickly.
Note:
When the minute display changes from »59« to »00«, this does not
affect the hour display.
4 Release »TIME« to conclude the setting.
– Display: the current time.
Setting the alarm time
1 Press and hold down »ALARM«.
– Display: the last alarm time set.
2 Press »HOUR« briefly to set the hours step-by-step or hold it down to
run through the hours quickly.
3 Press »
MIN
« briefly to set the hours step-by-step or hold it down to run
through the minutes quickly.
4 Release »ALARM« to conclude the setting.
5 Use the »RADIO
•
9
ɷ
e ALARM« slide switch (left side
of device) to set the alarm signal you require (»
ɷ
« = radio station,
»e« = signal tone).
– Display: the »ALARM
•
« LED lights up, i.e. the alarm setting is
activated.
– The device switches on at the set alarm time with the selected alarm
signal.
