Bedienungsanleitung Gude 1200-12 VOLT 55127 (Seite 11 von 68) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

628788

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

and whether there are no conditions that could nega-

tively affect the proper working of the appliance. Any

damaged parts must be professionally repaired or re-

placed by a qualified engineer. The appliance must

not be used if he switch cannot be turned on and off

properly.

• SPARE PARTS AND ACCESSORY EQUIPMENT

Original spare parts may only be used for servicing.

The warranty will not apply when other parts are

used. Parts and accessory parts considered to be

used with this appliance may only be used. The re-

spective parts can be obtained from Güde GmbH &

Co. KG.

Special instructions for using this

electric winch

The use of this power appliance may lead to special dan-

gerous situations. The use requires a special caution to

provide safety of the operator and other persons.

Cable (pic. J/14):

Check whether the cable (14) is in a good condition and

whether fixed properly. Do not use the winch if the cable

(14) is worn through. Do not change the cable (14) for a

cable that is less firm (14).

Battery:

Check whether the battery is in a good condition. Avoid

any contact with the accumulator acid or any other harmful

substances. Use appropriate eye protection equipment for

works on the battery. Let the engine run when using the

winch to prevent the battery from discharging.

Keep distance:

Do not stand in the cable pull direction. If the cable (14)

slips off or pulls apart, it gets shot in that direction. If the

winch is being operated, avoid any contact with hands,

clothing, hair or jewels near the winch. Invite another per-

son who will check whether the winch can be used safely.

Before starting the winch, make sure such person keeps

sufficient distance from the vehicle and the cable.

Performance limits:

Do not try to exceed the limit values for the pulling force of

this win ch.

Never use the hand crank (1) to “support” the winch. This

would damage the winch and could cause injuries.

Secure the pulled load before releasing the cable (14)

on the winch.

Installation

Connection of electric winch cables

The winch cables can be connected temporarily or perma-

nently:

1. Lift the rubber gasket and put the cable outlet to the

plug on the right of the winch body. Put the cable

from the winch to the battery and make sure it does

not get to the rotating parts and the risk of tripping is

prevented.

2. Connect the black terminal on the cable to the vehi-

cle frame to form ground connection. Connect the red

terminal to the positive pole (+ / red) of the battery.

Notice: Make sure the battery used is a 12 V car bat-

tery or a similar battery in a good condition.

Caution: the appliance cannot be connected to a

vehicle lighter.

3. Lift the rubber gasket on the left of the winch body.

Grasp the remote control (4) and put the outlet on the

cable end to the plug on the left of the winch body.

4. Put the remote control (4) on a safe place until the

winch is ready to be operated.

CAUTION!

1. Red and red (positive and positive) and black with

frame to be connected at all times – as ground con-

nection if the battery of the vehicle is used as a

source of current.

2. Never use the winch or any other accessory equip-

ment until

the battery gets discharged to the full extent.

3. If the engine is running when the winch is being op-

erated to make the battery charged, maximum cau-

tion is necessary for works on the vehicle and around

the vehicle.

4. Any dirty, corroded or leaking battery must not be

used as the leaking acid could cause a risk of injury.

5. For all works on the battery or with the battery, pro-

tective glasses meeting applicable requirements for

works of that type must be worn.

Winch installation

The winch has been dimensioned in a way it can be

temporarily installed using foxing equipment for at-

tachment.

1. Hook the adapter plate (9) to the winch basic plate

(D) using the three pin screws.

2. The assembly comprising the winch and adapter

plate (9) can be fastened to the attachment by putting

the spherical head through the given opening in the

adapter plate (9).

Using the winch

1. Put the vehicle transmission to an idle position (never

use the winch when a gear is engaged or the park

braking system applied as the vehicle transmission

could get damaged). Apply the hand brake. Support

the wheels by suitable wedges to prevent the vehicle

from moving.

2. To lift the cable (14), press the respective switch (H-

I/b) on the remote control (4) and put it out of the coil

with slight tension. Leave at least three cable wind-

ings on the coil at all times to prevent the cable from

pulled out of the coil.

3. Hook the cable (14) using the hauling rope, chain or

hook it in any other suitable manner to the pulled ob-

ject. Never put the cable around any object and then

hook directly to the rope as the pulled item would get

damaged by this and the cable could pull apart or

fray.

4. Move back to a safe place from where operate the

remote control (4) switch (b) in a way to draw the ca-

ble and pull the item using the winch in the required

manner.

5. When lowering the load, press the respective remote

control switch and release slowly.

CAUTION!

1. If the winch is being operated, avoid any contact with

hands, clothing, hair or jewels near the drum and ca-

ble (14).

2. Never use the winch if the cable (14) is frayed, broken

or damaged.

3. Never let anyone standing near the cable (14) or at

the winch in line with the cable (14) if pulling force is

being applied on the cable (14). If the cable (14) slips

off or gets broken, it may suddenly shoot backward

and put all bystanders at risk. If the winch is being

operated, all persons must be in sufficient side dis-

tance from the winch.

Gude 1200-12 VOLT 55127 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info