623595
27
Zoom out
Zoom in
Vorherige Seite
1/124
Nächste Seite
23
GB
ENGLISH
Specied Conditions Of Use
The cordless chainsaw may only be used to cut wood
across to the bre direction. The handle has exclusi-
vely been designed to power adjustable Güde 25.2
V Li-ion series garden appliances for works in private
gardens.
Respecting technical data and safety precautions.
Do not use this product in any other way as stated
for normal use. Not observing general regulations
in force and instructions from this manual does not
make the manufacturer liable for damages.
Read and understand the operating
instructions before using the
appliance. Abide by all the safety
measures stated in the service manual. Act
responsibly toward third parties.
In case of any doubts about connection and
operation refer please to our customer center
Technical Data
Battery Operated Chain Saw 300/36 Li-Ion Set 300/36 KS
Art. No
95680 95660
Voltage 36 V
36 V
Cutting length 270 mm 270 mm
Bar length 350 mm 350 mm
Groove/sword 1,3 mm 1,3 mm
Chain speed 10 m/s 10 m/s
Chain oil tank 0,18 l 0,18 l
Weight (without chain, sword, battery, Charging equipment and
with empty oil tank)
4,2 kg 4,2 kg
Segment 3/8” 3/8”
Guiding footing thickness 1,3 mm 1,3 mm
Number of guiding footings 45 45
Noise details
Sound pressure level L
pA
1)
87,48 dB (A) 87,48 dB (A)
Vibration value measured L
WA
1)
98,48 dB (A) 98,48 dB (A)
Guaranteed sound power level L
WA
2)
101 dB (A) 101 dB (A)
Measured according to
1)
EN 60745;
2)
2000/14/EG+ 2005/88/EG; Uncertainty K = 2,5 dB (A)
Wear ear protectors!
Vibration details
Total vibration values (triaxial vector sum) Determined properly EN 60745
Vibration emission value a
h
8,956 m/s
2
8,956 m/s
2
Uncertainty K = 1,5 m/s
2
WARNING: The vibration emission level will vary because of the ways in which a power tool can be used and
may increase above the level given in this information sheet.
The vibration emission level may be used to compare one tool with another.
It may be used for a preliminary assessment of exposure.
An accurate estimate of the vibratory load shouldalso take into account the times when the tool isshut down
or when it is running but not actually inuse. This may signicantly reduce the vibratoryload over the total
working period.
Identify additional safety measures to protect theoperator from the eects of vibration such as:maintain the
tool and the accessories, keep thehands warm, organisation of work patterns.
27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Gude 36 KS 95660 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info