Bedienungsanleitung Gude 36 KS 95660 (Seite 29 von 124) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

623595

Zoom out

Zoom in

Vorherige Seite

1/124

Nächste Seite

MAX. 40°C

Protect the battery against temperatures

above 40°C.

Li-Ion

Do not throw the batteries in household

waste.

Deliver the batteries to a collection centre of

old batteries where they will be recycled in

an environmentally friendly way.

General Power Tool Safety Warnings

WARNING

Read all safety warnings and all instructions.Failure

to follow the warningsand instructions may result in

electric shock, re and/or serious injury. Save all war-

nings and instructions for future reference.

The term „power tool“ in the warnings refers to your

mains-operated (cordepower tool orbattery-opera

ted (cordless) power tool.

1) Work area safety

a) Keep work area clean and well lit. Cluttered or

dark areas invite accidents.

b) Do not operate power tools in explosive atmos

pheres, such as in the presence ofammable

liquids, gases or dust. Power tools create sparks

which may ignite thedust or fumes.

c) Keep children and bystanders away while ope

rating a power tool.Distractions cancause you to

lose control.

2) Electrical safety

a) Power tool plugs must match the outlet. Never

modify the plug in any way. Do notuse any

adapter plugs with earthed (groundepower

tools. Unmodied plugs andmatching outlets will

reduce risk of electric shock.

b) Avoid body contact with earthed or grounded

surfaces, such as pipes, radiators,ranges and refri

gerators. There is an increased risk of electric shock if

your body isearthed or grounded.

c) Do not expose power tools to rain or wet con

ditions. Water entering a power toolwill increase

the risk of electric shock.

d) Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging thepower tool.

Keep cord away from heat, oil, sharp edges

or moving parts. Damagedor entangled cords

increase the risk of electric shock.

e) When operating a power tool outdoors, use an

extension cord suitable foroutdoor use. Use of

a cord suitable for outdoor use reduces the risk of

electric shock.

f) If operating a power tool in a damp location

is unavoidable, use a residual currentdevice

(RCprotected supply. Use of an RCD reduces the

risk of electric shock.

3) Personal safety

a) Soyez attentif, faites attention à ce que vous

faites et faites preuve de bon sens lors de

l‘utilisation de l‘appareil électrique. N‘utilisez

jamais l‘appareil électrique si vous êtes fatigué,

sous eet de drogues, d‘alcool ou de médica

ments. A moment of inattention while operating

power toolsmay result in serious personal injury.

b) Use personal protective equipment. Always

wear eye protection. Protectiveequipment such

as dust mask, non-skid safety shoes, hard hat, or

hearing protectionused for appropriate conditions

will reduce personal injuries.

c) Prevent unintentional starting. Ensure the

switch is in the o-position beforeconnecting

to power source and/or battery pack, picking

up or carrying the tool. Carrying power tools with

your nger on the switch or energising power tools

that havethe switch on invites accidents.

d) Remove any adjusting key or wrench before

turning the power tool on. A wrenchor a key left

attached to a rotating part of the power tool may

result in personal injury.

e) Do not overreach. Keep proper footing and

balance at all times. This enables bettercontrol

of the power tool in unexpected situations.

f) Dress properly. Do not wear loose clothing or

jewellery. Keep your hair, clothingand gloves

away from moving parts. Loose clothes, jewelle

ry or long hair can becaught in moving parts.

g) If devices are provided for the connection of

dust extraction and collectionfacilities, ensure

these are connected and properly used. Use of

dust collection canreduce dust-related hazards.

4) Power tool use and care

a) Do not force the power tool. Use the correct po

wer tool for your application.

Thecorrect power

tool will do the job better and safer at the rate for

which it was designed.

b) Do not use the power tool if the switch does not

turn it on and o. Any power toolthat cannot be

controlled with the switch is dangerous and must

be repaired.

c) Disconnect the plug from the power source

and/or the battery pack from thepower tool

before making any adjustments, changing

accessories, or storingpower tools. Such pre

ventive safety measures reduce the risk of starting

the powertool accidentally.

d) Store idle power tools out of the reach of child-

ren and do not allow personsunfamiliar with

the power tool or these instructions to operate

the power tool. Power tools are dangerous in the

hands of untrained users.

e) Treat electric tools carefully. Check whether the

moving parts work perfectly and do not drag,

whether not broken or damaged to such an

extent that functioning of electric tools could

be aected. Have any damaged parts repaired

before using the machine. Many accidentsare

caused by poorly maintained power tools.

ENGLISH

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gude 36 KS 95660 Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info