Bedienungsanleitung Gude GTB 16-5 R - 55190 (Seite 26 von 88) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

623122

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

GTB 16/5R | GTB 16/12RL

ENGLISH

Requirements for operating sta 

The operating sta must carefully read the Opera-

tingInstructions before using the appliance.

Quali cation: Apart from the detailed instructions

by aprofessional, no special quali cation is necessary

forappliance using.

Minimum age:Persons over 16 years of age can

only workon the appliance.An exception includes

youngsters trained in order to reachknowledge

under supervision of the trainer duringoccupational

education.

Training:Using the appliance only requires corre-

spondingtraining by a professional or the Operating

Instructions. Nospecial training is necessary.

Emergency procedure

Conduct a  rst-aid procedure adequate to the injury

and summon quali ed medical attendance as quickly

as possible. Protect the injured person from further

harm and calm them down. For the sake of eventual

accident, inaccordance with DIN13164, a workplace

has to be  ttedwith a  rst-aid kit. It isessential to

replace any usedmaterial in the  rst-aid kitimmedia-

tely after it has been used. If you seek help,state the

following pieces ofinformation:

1. Accident site

2. Accident type

3. Number of injured persons

4. Injury type(s)

Maintenance

Treatment, maintenance and cleaning may only be

performed when the drive is o and the machine idle.

The drive must necessarily be turned o when the

machine is not working properly.

Check all screw and plug-in connections and protec-

tive equipment if  rm and tightened properly and

whether all moving parts are running smooth whene-

ver the appliance is to be put into operation.

Prior to every use, visually check the machine to rule

out any defects, in particular on the power cable and

the plug.

At all times, keep the machine, ventilation slots, in

particular, clean. Never spray water on the machine!

All moving parts should be treated with environmen-

tal-friendly oil. Never use any grease!

Repairs and works speci ed in these Instructions may

only be performed by quali ed authorised sta .

Safety instructions for bench drills

Danger of injury !

Never put your hands and feet near the rotating

parts.

Read carefully the operating and maintenance

instructions. Familiarise thoroughly with the controls

and proper use of the appliance. You need to know

how the appliance works and how controls can imme-

diately be switched o .

Never let children work with the appliance. Never let

adults work with the appliance unless they have been

properly trained.

Keep all persons, especially small children, and pets

out of reach of the place of your work.

Being careful prevents slipping or falling, especially

when reversing.

Do not adjust the appliance when the engine is

running (except for settings directly recommended by

the manufacturer).

Protective glasses or a shield should always be used

when operating, adjusting or repairing the appliance.

Wear close- tting clothes. Ties, jewels, long hair and

sleeves may get caught by the drill.

Device to be operated in a perfect state only. Inspect

the device visually every time it is to be used. Check

in particular the safety equipment, electrical controls,

electric cables and screwed connection for damage

and if tightened properly. Replace any damaged parts

before operating the device.

NEVER put your hands and  nger close to the drill bit.

DO NOT ATTEMPT to drill material with the surface

other than  at unless a suitable support is available.

NEVER switch the machine on while pressing the drill

bit against the material.

Before switching the machine on, MAKE SURE that the

bench-clamping lever is  rmly tightened.

MAKE SURE that the bit is  rmly clamped in the chuck.

Before switching the machine on, MAKE SURE that the

chuck key is removed.

USE A CLIP OR CLAMPING JAWS to secure the piece to

be drilled on the bench.

DON´T wear gloves when operating the drill.

Set the drill to speed answering a speci c job.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gude GTB 16-5 R - 55190 Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info