1. Pull the crown counter-clockwise out to the 2nd Click Position.
2. Turn the crown clockwise to set hour and minute hands.
3. After the time has been set, push the crown back to the Normal position.
1. Pull the crown counter-clockwise out to the 2nd Click Position.
2. Turn the crown clockwise to set hour and minute hands.
3. After the time has been set, push the crown back to the Normal position.
1. Pull the crown counter-clockwise out to the 1nd Click Position.
2. Turn the crown counter-clockwise to set the date.
* If the date is set between the hours of around 9:00 PM and 1:00 AM,
the date may not change on the following day.
3. After the date has been set, push the crown back to the Normal position.
1. Pull the crown counter-clockwise out to the 1nd Click Position.
2. Turn the crown clockwise to set the date.
* If the date is set between the hours of around 9:00 PM and
1:00 AM, the date may not change on the following day.
3. After the date has been set, push the crown back to the Normal position.
CHRONOGRAPH RESET (INCL. AFTER REPLACING BATTERY)
This procedure shoud be performed when the chronograph
second hand does not return to the Zero position.
1. Pull the crown counter-clockwise out to the 2nd position.
2. Press button „A“ to set the chronograph second hand to the zero position.
The chronograph hand can be advanced rapidly by continuously pressing
button „A“.
3. Once the hand have been zeroed, return the crown to the normal position.
* Do not push crown to normal position while the chronograph second
hand returns to zero position.
CHRONOGRAPH RESET (INCL. AFTER REPLACING BATTERY)
This procedure shoud be performed when the chronograph second hand
does not return to the Zero position.
1. Pull the crown counter-clockwise out to the 2nd Click Position.
2. Press the button „A“ once to set the chronograph second hand to the
Zero position.
3. Press the button „B“ once to set the chronograph 1/20 second hand to
the Zero position.
* The chronograph hands can be advanced rapidly by continuously
pressing button „A“ or „B“.
4. Once the hands are set at Zero position, reset the time and return the
crown to its normal position.
USING THE CHRONOGRAPH
This chronograph is able to measure and display time in 1/1 second united
up to maxinum of 11 hours 59 minutes 59 seconds.
The chronograph second hand keeps continuously for 11 hours 59 minutes
59 seconds after starting.
Measuring time with the stopwatch
1. Press button „A“ to start the chronograph.
2. The chronograph can be started and stopped each time button „A“ is pressed.
3. Press button „B“ to reset the chronograph and chronograph minute and
second hands return to their zero positions.
USING THE CHRONOGRAPH
This chronograph is able to measure and display time in 1/20 second
united up to maximum of 59 min 59 sec.
The chronograph 1/20 second hand keeps continuously for 30 seconds
after starting, and then stops at Zero position.
Measuring time with the stopwatch
1. Press button „A“ to start the chronograph.
2. The chronograph can be started and stopped each time button „A“
is pressed.
3. Press button „B“ to reset the chronograph and chronograph minute
and second hands return to their Zero positions.
„A“ Time measurement „A“ Stop „B“ RESET
„A“ Time measurement „A“ Stop „B“ RESET
LADIES GIANTS
GENTS GIANTS
BUTTON ADATE
TIME SECOND HAND
CHRONO MINUTE HAND
CHRONO SECOND HAND
CHRONO 1/20 SEC. HAND
BUTTON B
CROWN
NORMAL POSITION
1st CLICK POS.
2st CLICK POS.
DISPLAYS AND BUTTONS
DISPLAYS AND BUTTONS
DISPLAYS AND BUTTONS
SETTING THE TIME
SETTING THE TIME
WINDING THE MAINSPRING
SETTING THE DATE
SETTING THE DATE
1. Pull the crown counter-clockwise out to the 2nd Click Position.
2. Turn the crown clockwise to set hour and minute hands.
3. After the time has been set, push the crown back to the Normal position.
1. Pull the crown counter-clockwise out to the 2nd Click Position.
2. Turn the crown clockwise to set hour and minute hands.
3. After the time has been set, push the crown back to the Normal position.
Automatic winding watch can also be hand winded by turning the crown clockwise in Winding position. Wind several times clockwise. It will start to move naturally.
1. Pull the crown counter-clockwise out to the 1nd Click Position.
2. Turn the crown clockwise to set the date.
* If the date is set between the hours of around 9:00 PM and 1:00 AM,
the date may not change on the following day.
3. After the date has been set, push the crown back to the Normal position.
1. Pull the crown counter-clockwise out to the 1nd Click Position.
2. Turn the crown counter-clockwise to set the date.
* If the date is set between the hours of around 9:00 PM and 1:00 AM,
the date may not change on the following day.
3. After the date has been set, push the crown back to the Normal position.
Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.
Art des Missbrauchs:
Forenregeln
Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:
Lesen Sie zuerst die Anleitung;
Schauen Sie nach, ob die Frage bereits gestellt wurde;
Stellen Sie die Frage so deutlich wie nur einigermaßen möglich;
Erwähnen Sie was Sie bereits versucht haben um das Problem zu lösen;
Ist Ihr Problem von einem Besucher gelöst dann lassen Sie ihn / sie wissen in diesem Forum;
Falls Sie reagieren möchten, so verwenden Sie bitte das Antworten- Formular;
Da ihre Frage für alle Besucher sichtbar ist, sollten Sie lieber keine persönliche Daten erwähnen.
Neu registrieren
Registrieren auf E - Mails für haemmer Giants 22.14 wenn:
neue Frage gestellt werden
neue Handbücher vorhanden sind
Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.
Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.
Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.
Ihre Frage wurde zu diesem Forum hinzugefügt
Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.