Bedienungsanleitung Hako Hakomatic E 430 (Seite 3 von 30) (Englisch)

683780

3

Zoom out

Zoom in

Vorherige Seite

1/30

Nächste Seite

1

Proper Use

The Hakomatic E 430 vacuum scrub-

bing machine has been exclusively de-

signed for floor cleaning, such as wet

scrubbing.

Whatever sort of use beyond the spe-

cified range will be deemed improper

use; the manufacturer cannot be held

liable for consequential damages.

The term of proper use also includes

compliance with the manufacturer's in-

structions about operation, maintenan-

ce and repair.

The Hakomatic may be used, serviced

and repaired by persons only that are

familiar with the machine and are awa-

re of possible hazards involved.

The appropriate Accident Prevention

Regulations as well as the applicable

general regulations about safety and

health at work will have to be complied

with. Modifications made to the

Hakomatic E 430 in absence of the

manufacturer's consent will relieve the

manufacturer from a possible liability

for consequential damage.

Caution! This machine is not suitable

for evacuation of dusts, which are ex-

plosive or dangerous to health.

Notes on warranty

The terms of the sales contract apply.

Damages are not subject to warranty if

they are due to non-compliance with

the maintenance and service provi-

sions. Any maintenance work has to

be performed by an authorized Hako

service workshop and confirmed in the

"Maintenance certificate" which is the

warranty document.

The following is excluded from

warranty:

Natural wear and tear after overload,

fuses and damages caused by inex-

pert handling and unauthorized

modification of the machine.

Moreover, any claim for warranty beco-

mes extinct if damages at the machine

are caused by fitting of parts or acces-

sories without Hako's prior and explicit

consent or by non-compliance with the

maintenance instructions.

Acceptance of the machine

Upon arrival, check your consignment

for possible transit damage. Please

have the railway authorities or the

freight forwarder confirm such damage

and mail your report and waybill to:

Unsere Anschrift :

Hako GmbH

Hamburger Strasse 209-239

23843 Bad Oldesloe

Introduction

1

Proper Use

The Hakomatic E 430 vacuum scrub-

bing machine has been exclusively de-

signed for floor cleaning, such as wet

scrubbing.

Whatever sort of use beyond the spe-

cified range will be deemed improper

use; the manufacturer cannot be held

liable for consequential damages.

The term of proper use also includes

compliance with the manufacturer's in-

structions about operation, maintenan-

ce and repair.

The Hakomatic may be used, serviced

and repaired by persons only that are

familiar with the machine and are awa-

re of possible hazards involved.

The appropriate Accident Prevention

Regulations as well as the applicable

general regulations about safety and

health at work will have to be complied

with. Modifications made to the

Hakomatic E 430 in absence of the

manufacturer's consent will relieve the

manufacturer from a possible liability

for consequential damage.

Caution! This machine is not suitable

for evacuation of dusts, which are ex-

plosive or dangerous to health.

Notes on warranty

The terms of the sales contract apply.

Damages are not subject to warranty if

they are due to non-compliance with

the maintenance and service provi-

sions. Any maintenance work has to

be performed by an authorized Hako

service workshop and confirmed in the

"Maintenance certificate" which is the

warranty document.

The following is excluded from

warranty:

Natural wear and tear after overload,

fuses and damages caused by inex-

pert handling and unauthorized

modification of the machine.

Moreover, any claim for warranty beco-

mes extinct if damages at the machine

are caused by fitting of parts or acces-

sories without Hako's prior and explicit

consent or by non-compliance with the

maintenance instructions.

Acceptance of the machine

Upon arrival, check your consignment

for possible transit damage. Please

have the railway authorities or the

freight forwarder confirm such damage

and mail your report and waybill to:

Unsere Anschrift :

Hako-Werke GmbH

Hamburger Strasse 209-239

23843 Bad Oldesloe

Introduction

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Lesen Sie zuerst die Anleitung;
Schauen Sie nach, ob die Frage bereits gestellt wurde;
Stellen Sie die Frage so deutlich wie nur einigermaßen möglich;
Erwähnen Sie was Sie bereits versucht haben um das Problem zu lösen;
Ist Ihr Problem von einem Besucher gelöst dann lassen Sie ihn / sie wissen in diesem Forum;
Falls Sie reagieren möchten, so verwenden Sie bitte das Antworten- Formular;
Da ihre Frage für alle Besucher sichtbar ist, sollten Sie lieber keine persönliche Daten erwähnen.

Neu registrieren

Registrieren auf E - Mails für Hako Hakomatic E 430 wenn:

neue Frage gestellt werden
neue Handbücher vorhanden sind

Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.

Info