683782

Hako Scrubmaster B140R Seite 8

8
Zoom out
Zoom in
Vorherige Seite
1/38
Nächste Seite
Installation of battery
Battery system A and B
How to install the tray-type batteries
24 V / 320 Ah or 24 V / 280 Ah
Open the doors at the left and right
side
Tilt the driver seat upwards to the
right
Dismount brace (1) at the left side
(4 screws)
Remove plug of the seat switch line
Dismount brace (5) including seat at
the right side and set aside (do not
remove belt)
Swivel device plug
Place tray battery (4) by means of a
lifting unit or a fork-lift truck into the
machine from the left side.
Note: Only use lifting and trans-
porting facilities e.g. lifting tackle
according to VDI 3616. Cells, con-
nectors or cables must not be
damaged by usage of hooks.
Check the coding of battery, device
and charger plugs and modify as
required according to the instruc-
tions on page 41 and 42.
Link battery and device plugs (pay
attention to tight fit)
Mount left brace (1) and brace (5)
including driver seat
Connect the line to seat switch.
Close side doors and tilt the driver
seat downwards
Proceed to dismounting in inverse
order
Battery system C and D
Open the doors at the left and right
side
Tilt the driver seat upwards to the
right
Place the batteries 6 V/180 Ah or
6 V/240 Ah into the battery com-
partment and connect the poles
with the battery lines
Check the coding of battery, device
and charger plugs and modify as
required according to the instruc-
tions on page 41
Close side doors and tilt the driver
seat downwards
Proceed to dismounting in inverse
order.
40
1 Brace
2 Device plug
3 Battery plug
4 Tray-type battery
5 Brace including driver seat
1
2
5
4
3
Installation of battery
Battery system A and B
How to install the tray-type batteries
24 V / 320 Ah or 24 V / 280 Ah
Open the doors at the left and right
side
Tilt the driver seat upwards to the
right
Dismount brace (1) at the left side
(4 screws)
Remove plug of the seat switch line
Dismount brace (5) including seat at
the right side and set aside (do not
remove belt)
Swivel device plug
Place tray battery (4) by means of a
lifting unit or a fork-lift truck into the
machine from the left side.
Note: Only use lifting and trans-
porting facilities e.g. lifting tackle
according to VDI 3616. Cells, con-
nectors or cables must not be
damaged by usage of hooks.
Check the coding of battery, device
and charger plugs and modify as
required according to the instruc-
tions on page 41 and 42.
Link battery and device plugs (pay
attention to tight fit)
Mount left brace (1) and brace (5)
including driver seat
Connect the line to seat switch.
Close side doors and tilt the driver
seat downwards
Proceed to dismounting in inverse
order
Battery system C and D
Open the doors at the left and right
side
Tilt the driver seat upwards to the
right
Place the batteries 6 V/180 Ah or
6 V/240 Ah into the battery com-
partment and connect the poles
with the battery lines
Check the coding of battery, device
and charger plugs and modify as
required according to the instruc-
tions on page 41
Close side doors and tilt the driver
seat downwards
Proceed to dismounting in inverse
order.
40
1 Brace
2 Device plug
3 Battery plug
4 Tray-type battery
5 Brace including driver seat
1
2
5
4
3
Installation of battery
Battery system A and B
How to install the tray-type batteries
24 V / 320 Ah or 24 V / 280 Ah
Open the doors at the left and right
side
Tilt the driver seat upwards to the
right
Dismount brace (1) at the left side
(4 screws)
Remove plug of the seat switch line
Dismount brace (5) including seat at
the right side and set aside (do not
remove belt)
Swivel device plug
Place tray battery (4) by means of a
lifting unit or a fork-lift truck into the
machine from the left side.
Note: Only use lifting and trans-
porting facilities e.g. lifting tackle
according to VDI 3616. Cells, con-
nectors or cables must not be
damaged by usage of hooks.
Check the coding of battery, device
and charger plugs and modify as
required according to the instruc-
tions on page 41 and 42.
Link battery and device plugs (pay
attention to tight fit)
Mount left brace (1) and brace (5)
including driver seat
Connect the line to seat switch.
Close side doors and tilt the driver
seat downwards
Proceed to dismounting in inverse
order
Battery system C and D
Open the doors at the left and right
side
Tilt the driver seat upwards to the
right
Place the batteries 6 V/180 Ah or
6 V/240 Ah into the battery com-
partment and connect the poles
with the battery lines
Check the coding of battery, device
and charger plugs and modify as
required according to the instruc-
tions on page 41
Close side doors and tilt the driver
seat downwards
Proceed to dismounting in inverse
order.
40
1 Brace
2 Device plug
3 Battery plug
4 Tray-type battery
5 Brace including driver seat
1
2
5
4
3
Installation of battery
Battery system A and B
How to install the tray-type batteries
24 V / 320 Ah or 24 V / 280 Ah
Open the doors at the left and right
side
Tilt the driver seat upwards to the
right
Dismount brace (1) at the left side
(4 screws)
Remove plug of the seat switch line
Dismount brace (5) including seat at
the right side and set aside (do not
remove belt)
Swivel device plug
Place tray battery (4) by means of a
lifting unit or a fork-lift truck into the
machine from the left side.
Note: Only use lifting and trans-
porting facilities e.g. lifting tackle
according to VDI 3616. Cells, con-
nectors or cables must not be
damaged by usage of hooks.
Check the coding of battery, device
and charger plugs and modify as
required according to the instruc-
tions on page 41 and 42.
Link battery and device plugs (pay
attention to tight fit)
Mount left brace (1) and brace (5)
including driver seat
Connect the line to seat switch.
Close side doors and tilt the driver
seat downwards
Proceed to dismounting in inverse
order
Battery system C and D
Open the doors at the left and right
side
Tilt the driver seat upwards to the
right
Place the batteries 6 V/180 Ah or
6 V/240 Ah into the battery com-
partment and connect the poles
with the battery lines
Check the coding of battery, device
and charger plugs and modify as
required according to the instruc-
tions on page 41
Close side doors and tilt the driver
seat downwards
Proceed to dismounting in inverse
order.
40
1 Brace
2 Device plug
3 Battery plug
4 Tray-type battery
5 Brace including driver seat
1
2
5
4
3
… 8 …

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Hako Scrubmaster B140R wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info