Bedienungsanleitung Hama 20890 Easy Line DVB-T USB 2.0 (Seite 17 von 17) (Englisch)

607813

Zoom out

Zoom in

Vorherige Seite

1/17

Nächste Seite

8. I cannot play the program

Make sure that installed the soundcard driver and the soundcard functions.

Please note that the soundcard and its driver must be installed, regardless of whether or not you need to activate

the sound.

Check the signal quality and signal strength.

9. The sound is ok but the screen is blank during playback.

Make sure that the VGA driver and Microsoft DirectX8.1 have been properly installed.

10. The DVB-T MPEG2 video on the laptop is stuttering during playback.

Playing the DVB-T MPEG2 video consumes too much power. To improve performance, ensure that the

Energy-saving mode of the laptop o is deactivated so that the CPU can be operated at its maximum frequency.

11. The remote control does not work. The DVB-T USB 2.0 receiver does not respond when I press the remote

control buttons.

Der Empfänger des DVB-T USB 2.0-Box muß Sichtkontakt zur Fernbedienung haben, damit das Gerät die

Kommandos vom Fernbediengerät empfangen kann.

Note:

1. Depending on the location, the digital DVB-T antenna can be affected by objects and the weather.

This can cause poor signal quality. We recommend installing an antenna on the roof for indoor reception.

2. Although this product can be moved, it should not be moved at high speeds. Check the other associated

products for these requirements.

3. If you use the recording timer, real time recording or timeshift function, make sure there is sufficient space

on the hard rive to save the amount of data.

4. To ensure that the device operates properly, please follow the instructions in the user manual and the

installation instructions. Improper use can result in instability or cause the system to crash.

We reserve the right to expand or delete the application or its functions. All newly issued drivers and applications

are listed on our web site. We are not responsible for further notification.

Chapter 5: Troubleshooting

This chapter should help you in remedying faults that can occur during installation and operation.

1. The DVB-T USB 2.0 receiver does not function properly.

Check whether the driver is correctly installed. You can check this in the driver installation in the Device Manager

under Control Panel. In the device category, a device with the designation DTV USB Receiver (DTV USB receiver)

must be present. If this is not the case, remove the USB Box, connect it to the USB port, follow the steps and rein-

stall the driver.

2. Windows cannot find the DVB-T USB 2.0 receiver.

a. Check whether the DVB-T USB 2.0 receiver has been properly connected to the USB port.

b. After connecting the DVB-T USB 2.0 receiver to the USB port, wait at least 3 seconds before starting the

DVB-T USB 2.0 receiver.

c. Restart the operating system.

d. Select Add/Remove Hardware Device under Control Panel of Windows to install the correct driver.

e. Disconnect the USB box and reconnect it. Make sure to wait 3 seconds between disconnecting and

reconnecting the USB box.

f. Connect the DVB-T USB 2.0 receiver to another USB port on the PC o.

3. Windows cannot find the driver for the DVB-T USB 2.0 receiver.

Make sure that the supplied driver has been placed into the CD-ROM drive during the installation.

Enter the correct directory in which the driver is located, if you manually perform the installation process.

4. Installing the DTB-T USB 2.0 receiver software.

Select setup.exe on the CD-ROM.

Follow the instructions of the installation wizard to install the software.

5. No channel is found during the auto scan.

Check the cable connection between the DVB-T USB 2.0 receiver and the antenna.

Make sure that the cable is properly connected to the card connection.

Close the DTV program, disconnect the DVB-T USB 2.0 box and reconnect it. Make sure to wait 3 seconds between

disconnecting and reconnecting the USB box. Restart the DTV program.

6. Error messages or blank screen

This can be the result of poor signal quality. The DVB-T USB 2.0 receiver does not receive sufficient program data

or receives the wrong data. Check the connection between the DVB-T USB 2.0 receiver and the antenna.

Check the VGA card driver or the VGA chip on the printed circuit board.

Make sure it can operate with the Microsoft Windows 2000/XP operating system.

Install Microsoft DirectX9.0 and Media Player 7.0 or a higher version.

7. The video is playing, but there is no sound

Check the soundcard or the volume setting.

00020890bda3 21.04.2005 14:41 Uhr Seite 32

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hama 20890 Easy Line DVB-T USB 2.0 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Hama 20890 Easy Line DVB-T USB 2.0

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info